Keel Guard SkegGuard Stainless Repair Protection

Megaware Skeg Guard Stainless Steel Skeg Repair/Protection

Not sure which SkegGuard fits your boat? See our application chart below or CLICK HERE to Download application chart

Megaware SkegGuards deliver dependable protection for your outboard motor's skeg using marine-grade 316 stainless steel construction. The reinforced 3mm wear-tab shields against rocks, debris, and trailering damage while maintaining optimal performance. Installation takes just 10 minutes with basic tools - no marine technician required. These guards can be fitted over broken skegs with as little as 2 inches remaining, providing a cost-effective alternative to expensive welding repairs. The contoured design includes a strategic drain hole to prevent corrosion and freezing. Compatible with Mercury, Yamaha, Honda, Suzuki, and other major brands, each SkegGuard features self-locking hardware and comes backed by a three-year warranty.

Key Features:

Made from mirror-polished, marine grade 316 stainless steel.

Thickened lower wear tab reduces ramp dragging and is ideal for river-running.

The drain hole prevents corrosion/freezing for longer wear.

Innovations will not compromise skeg performance.

Does not require a marine technician to install.

May be implemented with 2-3 inches of skeg remaining.

Three-year warranty.

Skeg Guard Installation Instructions:

• Secured with self-locking hardware, installation takes less than 10 minutes. If your skeg is already broken, Megaware's SkegGuard can be installed with as little as 2 inches of skeg remaining.

Using a mallet (leather, rubber, or wooden), place the Megaware SkegGuard on the skeg and gently tap on it. Once in place, drive it on with the mallet until fully seated.

Using the two pre-drilled mounting holes in the SkegGuard as pilot holes, drill the skeg using a 1/4" drill bit.

Install the stainless steel hardware using the hex-key tools supplied with the product.

Megaware SkegGuard Application Guide

Megaware's SkegGuard is available in models to fit virtually any skeg. Models for motors include Mercury, Mariner, Evinrude, Johnson, Honda, Nissan, OMC, Tohatsu, Suzuki, Volvo, and Yamaha.

JOHNSON - Does not fit Lightning Gearcase

27101 - 100, 115, 120, 140 1980 - 2001

EVINRUDE/JOHNSON - Does not fit Lightning Gearcase

27131 - 40, 50, 55, 60 2 Stroke E-TEC 2004-Present; 60 1996 - 2012

27121 - 65 2 Stroke E-TEC 2013 - 2015

27121 - 75, 90,115, 130 2 Stroke E-TEC 20" Shaft 2006 - Present

27081 - 90, 115, 130 E-TEC 25"-30" Shaft 2006 - Present

27081 - 150, 175, 200 20" Shaft E-TEC 2006 - Present

27091 - 135, 175, 200 25"-30" Shaft E-TEC 2 Stroke 2006 - 2014

27091 - 150 25"-30" Shaft E-TEC 2006 - Present

27091 - 225, 250, 300 E-TEC 2002 - 2014

27281 - 150, 175, 200, 225, 250, 300 E-TEC G2 (Curved) 2015 - Present

HONDA

27171 - 35, 40, 45, 50 4 Stroke 1991 - Present

27171 - 90 4 Stroke & V-TEC 2008 - Present

27071 - 60, 75 4 Stroke 2010 - Present

27071 - 75, 90, 115 4 Stroke 1995 - 2007

27271 - 115 4 Stroke 2010 - Present

27271 - 135, 150, 200, 225 4 Stroke 2004 - Present

MARINER

27341 - 40, 50, 60 2 & 4 Stroke 2003 - 2011

27071 - 50, 60 Bigfoot 2003 - 2011

27071 - 70, 90, 100, 115, 125 2/4 Stroke & Optimax 1983 - 2011

27211 - 150, 175, 200, 225, 250, 275, 300 Verado 2005 - 2011

27061 - 135, 150, 175, 200 Optimax 2 Stroke 1978 - 2011

27061 - 135, 150, 175, 200 4 Stroke 2005 - 2011

MERCURY

27021 MERCRUISER - Alpha I 1985 - 1990

27031 MERCRUISER - Alpha I Generation II 1991 - Present

27051 MERCRUISER - Bravo I & III 1990 - Present

27011 MERCRUISER - Pre-Alpha I Drives 1973 - 1984

27071 - 40, 50, 60 Bigfoot 2001 - 2013

27071 - 40, 50, 60 Command Thrust 2014 - Present

27071 - 50 4 Stroke 2006 - 2014

27071 - 75, 90, 115 2/4 Stroke & Optimax 2003 - 2014

27071 - 125 2 Stroke 2000 - …