Magma Grills

Magma Crossover Dual Round 7/8" or 1" Rail Mount T10-980

These Magma round rail mounts offers strength and balance, designed for use with the Crossover Single Firebox. Constructed from 18-8 stainless steel and 356 hard anodized aluminum for durability in harsh marine environments. These rail mounts need no tools are are able to instantly detach from the rail for compact storage and leaving no hardware on the rail. The quick release clamp allows the grill to be easily rotated to your desired settings.

Features:

Easy to Mount

Quick Release Clamp

18-8 Stainless Steel & 356 Hard Anodized Aluminum

Specifications:

Rails Fit : 7/8" or 1"

Length: 3.6"

Width: 4"

Height: 5.25"

Dual Extended Horizontal Rail Mount

This round rail, quick-disconnect, standard duty mounting bracket is made entirely of 18-8 stainless steel and 356 hard anodized aluminum. Allows mounting of Gourmet Series and Connoisseur Series Grills or Dual-Mount Tables out over the water. The quick-disconnect system allows quick disassembly leaving no hardware on the rail.

Fits Standard Horizontal Round Rails 1" (25.5 mm)

Fasteners for attaching this mount to Gourmet Series Grills or Dual Mount (DM) Tables are included with the grill or tables.

Frequently Asked Questions

• What is the Dual Extended Horizontal Rail Mount used for? The Dual Extended Horizontal Rail Mount is a standard-duty mounting bracket designed to mount Gourmet Series and Connoisseur Series Grills or Dual-Mount Tables out over the water. Its quick-disconnect system allows the mounted equipment to be removed while leaving no hardware on the rail.
• What materials is the Dual Extended Horizontal Rail Mount made from? The Dual Extended Horizontal Rail Mount is constructed entirely from 18-8 stainless steel and 356 hard anodized aluminum. These materials are used throughout the round rail mounting bracket.
• What size horizontal rail does the Dual Extended Horizontal Rail Mount fit? The Dual Extended Horizontal Rail Mount fits standard horizontal round rails measuring 1" (25.5 mm). Verify that your boat's rail matches this specified size before purchasing.
• Which grills and tables can be mounted with the Dual Extended Horizontal Rail Mount? The Dual Extended Horizontal Rail Mount is designed for Gourmet Series and Connoisseur Series Grills as well as Dual-Mount (DM) Tables. The fasteners required to attach the mount to these grills or tables are included with the corresponding grill or table.
• Does the Dual Extended Horizontal Rail Mount allow quick removal? Yes. The mount uses a quick-disconnect system that allows the attached grill or table to be quickly disassembled from the rail. The system is designed to leave no mounting hardware on the rail after removal.

Magma Marine Dual Extended Square/Flat Side, Bulkhead Rail Mount

This all 18-8 stainless steel mount extends your grill or filet table 8" in-board or outboard and attaches to square or flat rails up to 2-1/4" (57 mm) high by any depth. Mount can also attach to any flat vertical surface such as bulkheads, gunnels, transoms, or cabin sides. Rod portion of mount quickly disconnects for easy storage. Some fasteners required for installation.

Fasteners for attaching this mount to any Magma Rectangular Grill or Dual Mount (DM) Filet

Table/ Cleaning Station are included with those products

Some additional fasteners required for complete installations

Grill and table sold separately

Frequently Asked Questions

• What is the Magma Marine Dual Extended Square/Flat Side, Bulkhead Rail Mount used for? The Magma Marine Dual Extended Square/Flat Side, Bulkhead Rail Mount provides a mounting solution for compatible Magma grills or filet tables. It extends the grill or table 8 inches inboard or outboard and can attach to square or flat rails or flat vertical surfaces such as bulkheads, gunnels, transoms, or cabin sides.
• What size rails can the Magma Dual Extended Square/Flat Side Mount fit? This mount attaches to square or flat rails up to 2-1/4 inches (57 mm) high by any depth. It can also attach to flat vertical surfaces such as bulkheads, gunnels, transoms, or cabin sides.
• How far does the Magma Marine Dual Extended Mount extend a grill or filet table? The mount extends a compatible Magma grill or filet table 8 inches inboard or outboard. This provides additional positioning flexibility when installing compatible equipment on a rail or flat vertical surface.
• Is the Magma Dual Extended Square/Flat Side Mount easy to store? Yes. The rod portion of the mount quickly disconnects for convenient storage. The mount is constructed from 18-8 stainless steel.
• Does the Magma Dual Extended Square/Flat Side Mount include installation hardware? Some additional fasteners are required for complete installation. Fasteners for attaching the mount to compatible Magma rectangular grills or Dual Mount filet tables and cleaning stations are included with those products.
• Does the Magma Marine Dual Extended Square/Flat Side, Bulkhead Rail Mount include a grill or filet table? No. The grill and table are sold separately. This product is a mounting solution for compatible Magma rectangular grills or Dual Mount filet tables and cleaning stations.

These incredibly strong rail mounts have a unique pivoting design which allows them to mount on straight or curved rail or across the corner of a stern rail. Made of 18-8 stainless steel and 356 anodized aluminum, they instantly detach without tools for compact storage.

Incredibly strong and rigid, these rail mounts will not slip on the rail. They have a unique pivoting design which allows them to attach to curved rails or across the corner of a stern rail. Made of 18-8 stainless steel and 356 anodized aluminum, they instantly detach without tools for compact storage leaving no hardware on the rail. Fits standard size round rails 7/8" or 1".

Magma Square Double Stack Side Drink Caddy

The Magma Side Drink Caddy is the perfect addition to your T10-312B Fillet table. Designed to provide extra serving space and secure your bottles when entertaining out on the water. They are made from FDA approved, high density, polyethylene which is more practical and sanitary than wood cutting tables. They will not crack, mildew or absorb fish odors. They are virtually maintenance free and easily slide onto your fillet table.

Features:

100% UV Stabilized, Compression Molded, High-Density, Color Core Polyethylene

FDA Approved for food preparation and service

Will not crack, peel, or mildew. Does not absorb bacteria or fish odors.

Made in the USA

Specifications:

Length: 14.75"

Width: 12.5"

Height: 6.75"

* NOT for use when underway

Magma Party Table Construction Details

Made in the USA

Product is proudly manufactured in the United States

UV Resistant

Material resists damage from the sun

HDP

UV stabilized compression molded polyethylene is virtually indestructible. Will not crack, peel, mildew, absorb odors for maintenance free use

FDA Approved

Material is FDA approved and safe to use for food preparation

Magma Rectangle Party Table w/LeveLock Mount & Fillet Table

Magma's party table is perfect for providing an additional serving space while securing your bottles. Either at the sandbar or on a sunset cruise, this FDA approved polyethylene holds a variety of bottle sizes for entertaining onboard. This party table includes a LeveLock all angle fish rod holder mount along with a Magma T10-312B Fillet table. These attractive tables are nearly indestructible and excellent for filleting fish or serving food and beverages. They are made from FDA approved, high density, polyethylene which is more practical and sanitary than wood cutting tables. They will not crack, mildew or absorb fish odors. They are virtually maintenance free. They feature 2 fillet knife holders and a handy receptacle for your fishing pliers. The slot at the back of the tables permits instant water drainage from the work surface. This mount features a quick release cam action design to allows for convenient all angle adjustments or to fold flat for storage. This is an all in one package from food to drinks that will look good on any boat.

Features:

UV Resistant

FDA Approved

Holds Variety of Bottle Sizes

LeveLock Mount

Overboard Drainage

Fillet Table

Sizing:

L: 20"

W:L 14"

H: 7.5"

* NOT for use when underway

Magma Party Table Construction Details

Made in the USA

Product is proudly manufactured in the United States

UV Resistant

Material resists damage from the sun

Overboard Drainage

Slotted back permits drainage to keep your work station clean of scales and residue

HDP

UV stabilized compression molded polyethylene is virtually indestructible. Will not crack, peel, mildew, absorb odors for maintenance free use

FDA Approved

Material is FDA approved and safe to use for food preparation

Magma Rectangle Party Table w/LeveLock Mount

Magma's party table is perfect for providing an additional serving space while securing your bottles. Either at the sandbar or on a sunset cruise, this FDA approved polyethylene holds a variety of bottle sizes for entertaining onboard. This party table includes a LeveLock all angle fish rod holder mount. This mount features a quick release cam action design to allows for convenient all angle adjustments or to fold flat for storage.

Features:

UV Resistant

FDA Approved

Holds Variety of Bottle Sizes

LeveLock Mount Included

Sizing:

L: 18.75"

W:L 12.25"

H: 3.95"

* NOT for use when underway

Magma Party Table Construction Details

Made in the USA

Product is proudly manufactured in the United States

UV Resistant

Material resists damage from the sun

HDP

UV stabilized compression molded polyethylene is virtually indestructible. Will not crack, peel, mildew, absorb odors for maintenance free use

FDA Approved

Material is FDA approved and safe to use for food preparation

Magma Rectangle Party Table T10-530

Magma's party table is perfect for providing an additional serving space while securing your bottles. Either at the sandbar or on a sunset cruise, this FDA approved polyethylene holds a variety of bottle sizes for entertaining onboard. This table is able to use any Magma table mount or can slide into the Magma T10-312B Fillet Table.

Features:

UV Resistant

FDA Approved

Holds Variety of Bottle Sizes

Sizing:

L: 18.75"

W:L 12.25"

H: 3.95"

* NOT for use when underway

Magma Party Table Construction Details

Made in the USA

Product is proudly manufactured in the United States

UV Resistant

Material resists damage from the sun

HDP

UV stabilized compression molded polyethylene is virtually indestructible. Will not crack, peel, mildew, absorb odors for maintenance free use

FDA Approved

Material is FDA approved and safe to use for food preparation

Dual Locking Flush Mount Deck Socket

Two attractive mirror polished 18-8 stainless steel heavy duty flush deck socket sets features a push button lock pin to allow use while underway. Includes a flange gasket with integral flip-up water seal cap. Some fasteners required for installation.

Fasteners for attaching this mount to Gourmet Series Grills or Dual Mount (DM) Tables are included with the grill or tables.

Magma 41" First Mate Dual Mount Fillet Table T10-504B

Magma's First Mate fillet table is a premium, multi-purpose work surface that is designed for the serious angler to entertainer alike. This large dual mount fillet table is constructed from HDP material which provides performance and durability. The rugged dual mount design adds stability and functionality in any marine environment.

Packed with features. The engraved ruler is easy to read and perfect for measuring your latest catch. The oversized tool holsters are designed to fit even the largest of fillet knives and pliers. The slotted drain channel helps keep your deck clean by directing your scales fluids away from your workspace.

Magma First Mate Fillet Table Key Features:

• FDA Approved

Material is safe for food preparation

HDP Construction

This UV stabilized compression molded material is virtually indestructible and sanitary. It is resistant to cracking, peeling, mildew growth, and odors.

Made in the USA

Proudly manufactured in the United States

UV Resistant Material

Resists damage from the sun

Engraved Ruler

Included to measure the catch of the day

Tool Holders

Easy access to your fillet knives and pliers

Fillet Table Notes:

“Dual-Mount” (DM) mounting hardware is required for complete installation.

Fish Rod Holder, Fish Rod Holder Mount, knife and pliers not included.

Frequently Asked Questions

• What is the Magma 41" First Mate Dual Mount Fillet Table used for? The Magma 41" First Mate Dual Mount Fillet Table is a multi-purpose work surface designed for anglers and food preparation. Its large work area, engraved ruler, tool holsters, and slotted drain channel provide features for preparing bait, cleaning fish, and measuring your catch.
• What is the Magma First Mate Fillet Table made from? The Magma First Mate Fillet Table is constructed from UV-stabilized compression-molded HDP material. The material is designed to resist cracking, peeling, mildew growth, and odors while providing a sanitary work surface for marine use.
• Is the Magma First Mate Fillet Table approved for food preparation? Yes. The Magma First Mate Fillet Table is FDA approved, and its material is specified as safe for food preparation. Its UV-resistant HDP construction is also designed to withstand exposure to the sun.
• What features are included for cleaning fish and preparing bait? The table includes an engraved ruler for measuring your catch, oversized tool holsters for fillet knives and pliers, and a slotted drain channel that directs scales and fluids away from the workspace. The tool holders are designed for easy access during use.
• What mounting hardware is required to install the Magma First Mate Fillet Table? Dual-Mount (DM) mounting hardware is required for complete installation of the Magma First Mate Fillet Table. The product description does not specify which DM mounting hardware is required, so the appropriate hardware should be verified before installation.
• Are the rod holder, knife, and pliers included with the Magma First Mate Fillet Table? No. The Fish Rod Holder, Fish Rod Holder Mount, knife, and pliers are not included with the Magma First Mate Fillet Table. These items must be provided separately if needed for your setup.
• Where is the Magma First Mate Fillet Table manufactured? The Magma First Mate Fillet Table is proudly manufactured in the United States.

This new product from Magma will be the option to have. Constructed of injection molded polyethylene that will not fade, crack or mildew this convenient option attaches to the Dock Cleaning Station, Boat Cleaning Station or any of the the Tournament Series Tables. includes a hose holder, drink holder, and slots for extrapliers, hook extractor or filet knives.

Magma Tournament Series Dock Cleaning Station w/Mount T10-449B-HDP

Magma offers a dock cleaning station that is perfect for the hardcore angler that likes to prep on the go. Designed with an engraved logo and ruler with a black core for an clean look with an increased visibility for measuring the catch of the day. They are made from FDA approved, high density, polyethylene which is more practical and sanitary than wood cutting tables. They will not crack, mildew or absorb fish odors. They are virtually maintenance free. They feature 4 fillet knife holders along with 2 handy receptacles for pliers or hook removal tools. The new side channel along with the slotted back allows for proper drainage to keep your work surface clean of residue and scales when preparing, cleaning, or filleting.

The Tournament Series dock cleaning station comes equipped with a stainless steel 1-1/2" tubular base and 3 1-1/2". This allows you to mount the table to any dock or flat surface. The cleaning table also comes with 3 1-1/2" round rail mounting brackets that feature quick release knobs for easy adjustment or storage when out on the water. Constructed from 18-8 stainless steel along with 356 anodized aluminum for durability in marine environments. Offering a great size with excellent stability, the Magma tournament series dock cleaning station is a full size working station.

Features:

100% UV Stabilized, Compression Molded, High-Density, Color Core Polyethylene

FDA Approved for food preparation and service

Will not crack, peel, or mildew. Does not absorb bacteria or fish odors.

Features storage for pliers and (4) knife holders.

Slotted table back for overboard drainage.

Levelock quick release all angle rod holder mount

Made in the USA

Specifications:

Length: 47-1/2"

Width: 19-1/5"

Height: 38-1/32"

* NOT for use when underway

Magma Party Table Construction Details

Made in the USA

Product is proudly manufactured in the United States

UV Resistant

Material resists damage from the sun

HDP

UV stabilized compression molded polyethylene is virtually indestructible. Will not crack, peel, mildew, absorb odors for maintenance free use

FDA Approved

Material is FDA approved and safe to use for food preparation

Frequently Asked Questions

• What is the Magma Tournament Series Dock Cleaning Station T10-449B-HDP designed for? The Magma Tournament Series Dock Cleaning Station is designed as a full-size work surface for preparing, cleaning, and filleting fish at a dock or on a flat surface. It is made from UV-stabilized, compression-molded high-density polyethylene and includes storage for pliers and four fillet knives.
• What is the Magma Tournament Series Dock Cleaning Station made from? The cleaning station is constructed from FDA-approved, UV-stabilized, compression-molded high-density polyethylene. The material is designed to resist cracking, peeling, and mildew and does not absorb bacteria or fish odors.
• What mounting hardware is included with the Magma Dock Cleaning Station? The Magma Dock Cleaning Station includes a stainless steel tubular base and three round rail mounting brackets with quick-release knobs. The mounting system allows the table to be mounted to a dock or flat surface and provides adjustment or storage options.
• What features help keep the Magma Dock Cleaning Station organized and clean? The station includes four fillet knife holders and two receptacles for pliers or hook-removal tools. A slotted table back and side channel provide drainage for residue and scales while preparing, cleaning, or filleting fish.
• What are the dimensions of the Magma Tournament Series Dock Cleaning Station? The Magma Tournament Series Dock Cleaning Station measures 47-1/2 inches long, 19-1/5 inches wide, and 38-1/32 inches high. Its full-size design provides a substantial working station for dockside fish preparation. Can the Magma Tournament Series Dock Cleaning Station be used while the boat is und…

Magma Tournament Series 34 x 16" Black and White Bait & Filet Table

Magma's Tournament Series Bait & Filet table measures 34" wide, 16" deep and 4½" high. Constructed with the finest commercial quality UV stabilized high-density polyurethane, this table is practically indestructable and more sanitary than wood filet tables. This attractive table is black and white - featuring thin white cap layers and a bright black center. With a ruler engraved into the table, you can easily measure the days' catch.

The Magma Tournament Series Bait & Filet Table is designed not only for bait preparation and fish cleaning, but is also FDA approved for food preparation and services. These tables will not crack, peel, mildew, absorb bacteria or fish odors.

Features:

4 Filet Knife Holsters and 2 Pliers Receptacles

Grooved Sides and Slotted Table Back for Overboard Drainage

Rounded Edges/Corners for Safety

Multiple Mounting Options

1 Year Warranty

Frequently Asked Questions

• What is the Magma Tournament Series 34 x 16" Black and White Bait & Filet Table used for? The Magma Tournament Series Bait & Filet Table is designed for bait preparation and fish cleaning. It is also FDA approved for food preparation and service, making it suitable for the listed marine and food preparation applications.
• What are the dimensions of the Magma Tournament Series Bait & Filet Table? The Magma Tournament Series Bait & Filet Table measures 34 inches wide, 16 inches deep, and 4-1/2 inches high. It features an engraved ruler that can be used to measure your catch.
• What is the Magma Bait & Filet Table made from? The table is constructed from commercial-quality UV-stabilized high-density polyurethane. Its black and white design features thin white cap layers and a bright black center. The material is designed not to crack, peel, mildew, absorb bacteria, or retain fish odors.
• Does the Magma Tournament Series Bait & Filet Table have drainage features? Yes. The table has grooved sides and a slotted table back designed for overboard drainage. It also has rounded edges and corners for safety.
• What storage features are built into the Magma Bait & Filet Table? The Magma Tournament Series Bait & Filet Table includes four filet knife holsters and two pliers receptacles. These integrated features provide designated places for the listed tools while preparing bait or cleaning fish.
• Can the Magma Tournament Series Bait & Filet Table be mounted in different ways? Yes. The table features multiple mounting options. The product description does not specify the individual mounting methods, so the appropriate mounting option should be confirmed for your installation.
• What warranty is included with the Magma Tournament Series Bait & Filet Table? The Magma Tournament Series Bait & Filet Table includes a 1-year warranty.

Magma Tournament Series Bait & Filet Table w/ "LeveLock" Rod Holder Mount

The Magma Tournament Series Bait & Filet Table comes complete with a LeveLock all-angle rod holder mount. This filet table is constructed of U.V. stabilized, injection-molded polyethylene and is the strongest yet lightest filet table available. Built for marine environments, the Tournament Series bait table will not fade, chip, crack, peel, or hold fish odors. Additionally, this bait/filet table has a molded-in ruler that you can use to measure your catch.

This Magma Bait Table comes with a stainless steel and hard anodized aluminum rod holder mount. The LeveLock rod holder mount is constructed of marine-grade stainless steel tubing with "hard anodized" components for high corrosion resistance. Built to be versatile, this mount has an extremely high adjustment range and a sturdy draw tight handle design.

Features:

U.V. stabilized

Strong and lightweight

Molded-in ruler

Elevated platform for knife & plier storage

Includes LeveLock rod holder mount

Specifications:

Length (table only): 19-1/2"

Width (table only): 15-1/2"

Height (table only): 4-1/2"

Weight (including mount): 7.7 lbs.

Click to Download Magma T10-421 Bait/Filet Table Assembly Instructions

Magma T10-375 Pow'rGrip LeveLock Double Locking Fishing Rod Holder Mount

Just when you thought it couldn't get any better...this mount adjusts and locks in place at both ends. We've joined the LeveLock fish rod holder mount with the Pow'rGrip fish rod holder mount. This allows the Pow'rGrip portion of the mount to adjust to any size rod holder and lock in place, while the LeveLock portion of the mount, adjusts and locks your Magma rectangular grill, tournament series table or traditional single mount table to any desired position. With larger tournament series tables, use the LeveLegz table support legs to level and support even the largest bait or fillet project. This patented mount is the strongest, most corrosion resistant, most versatile mount in the industry.

Features:

Made of 18-8 stainless steel & cast 356 anodized aluminum

Fits cylindrical type rod holders

Most versatile and corrosion-resistant mount in the industry

Heavy duty - designed for grilling underway

Compatible with all rectangular marine grills

Nothing on the market compares to our newest, most versatile fish rod holder mount. It's made of heat treated stainless steel and hard anodized aluminum. The quick relase cam-action design allow convenient all angle adjustment. The 1-1/2" 18-8 stainless steel tube fits into most "crosspin" type rod holders in 8 different rotational positions. Folds flat for compact storage. Rod holder NOT included.

Magma Crossover Surface Slide Mount

This Magma surface slide mount is a convenient mount for any rectangular Magma grill, Crossover Firebox, fillet, or party table. Constructed from marine grade stainless steel tubing with cast aluminum components for durability and longevity in marine environments. The quick release clamp makes for easy and quick mounting as well as for rotation the surface to your desired space. When not in use simply pull the pin to release the mounting arm from the slide mount bracket.

Specifications:

Length: 14.3"

Width: 3.5"

Height: 17"

This all 18-8 stainless steel mount attaches to flat surfaces such as bulkheads, hulls, transoms or cabin sides. Also mounts to square or flat rails.

Fits HORIZONTAL RAILS up to 2-1/4" (57 mm) high by any depth

VERTICAL RAILS up to 1-5/8" (41 mm) wide by any depth.

**Some fasteners required for installation.

Magma Single Locking Flush Mount T10-326

This attractive mirror polished 18-8 stainless steel standard duty flush deck socket set features a push button lock pin and includes a flange gasket with integral flip-up water seal cap. Some fasteners required for installation.

Fasteners for attaching this mount to Gourmet Series Grills or Single Mount (SM) Tables are included with the grill and tables.

Magma 31" x 12-1/2" Bait & Filet Table with "Levelock" Rod Mount T10-313B

These attractive tables are nearly indestructible and excellent for filleting fish or serving food and beverages. They are made from FDA approved, high density, polyethylene which is more practical and sanitary than wood cutting tables. They will not crack, mildew or absorb fish odors. They are virtually maintenance free. They feature 2 fillet knife holders and a handy receptacle for your fishing pliers. The slot at the back of the tables permits instant water drainage from the work surface.

The LeveLock All-Angle Fish Rod Holder Mount is made of heat treated stainless steel and hard anodized aluminum. It is the most versatile mount on the market. The quick release cam-action design allows convenient all-angle adjustment. The 1-1/2” (38 mm) 18-8 stainless steel tube fits into most cross-pin type rod holders in 8 different rotational positions. Folds flat for convenient storage.(Rod holder, filet knives and pliers not included)

Magma Bait & Filet Table Key Features:

100% UV Stabilized, Compression Molded, High-Density, Color Core Polyethylene

FDA Approved for food preparation and service

Will not crack, peel, or mildew. Does not absorb bacteria or fish odors.

Features storage for pliers and (2) knife holders.

Grooved sides and slotted table back for overboard drainage.

Levelock quick release all angle rod holder mount

Made in the USA

Comes complete.  No additional mounting hardware required.

Frequently Asked Questions

• What is the Magma 31" x 12-1/2" Bait & Filet Table with LeveLock Rod Mount T10-313B used for? The Magma T10-313B Bait & Filet Table is designed for filleting fish or serving food and beverages. Its high-density polyethylene work surface includes two fillet knife holders, a receptacle for fishing pliers, and drainage features that allow water to leave the table surface.
• What is the Magma T10-313B bait and filet table made from? The table is made from FDA-approved, high-density polyethylene that is 100% UV stabilized, compression molded, and color core. The material is designed not to crack, peel, or mildew and does not absorb bacteria or fish odors.
• What storage and drainage features does the Magma bait and filet table have? The Magma T10-313B features storage for fishing pliers and two fillet knife holders. Its grooved sides and slotted back allow water to drain from the work surface, while the back slot provides instant water drainage during use.
• What is the LeveLock Rod Mount on the Magma T10-313B? The LeveLock All-Angle Fish Rod Holder Mount is made from heat-treated stainless steel and hard-anodized aluminum. Its quick-release cam-action design allows all-angle adjustment, while the 1-1/2-inch 18-8 stainless steel tube fits into most cross-pin type rod holders in eight rotational positions.
• Does the Magma T10-313B require additional mounting hardware? No. The Magma T10-313B comes complete, and the product description states that no additional mounting hardware is required. The rod holder, filet knives, and pliers are not included with the table.
• Can the LeveLock rod mount be stored when not in use? Yes. The LeveLock All-Angle Fish Rod Holder Mount folds flat for convenient storage. Its quick-release cam-action design also allows the mount to be adjusted and released for flexible positioning.

Magma 20" Bait & Fillet Table with Rod Holder LeveLock Mount T10-312B

These attractive tables are nearly indestructible and excellent for filleting fish or serving food and beverages. They are made from FDA approved, high density, polyethylene which is more practical and sanitary than wood cutting tables. They will not crack, mildew or absorb fish odors. They are virtually maintenance free. They feature 2 fillet knife holders and a handy receptacle for your fishing pliers. The slot at the back of the tables permits instant water drainage from the work surface.

The LeveLock All-Angle Fish Rod Holder Mount is made of heat treated stainless steel and hard anodized aluminum. It is the most versatile mount on the market. The quick release cam-action design allows convenient all-angle adjustment. The 1-1/2” (38 mm) 18-8 stainless steel tube fits into most cross-pin type rod holders in 8 different rotational positions. Folds flat for convenient storage.(Rod holder, filet knives and pliers not included)

Magma Bait & Fillet Table Key Features:

100% UV Stabilized, Compression Molded, High-Density, Color Core Polyethylene

FDA Approved for food preparation and service

Will not crack, peel, or mildew. Does not absorb bacteria or fish odors.

Features storage for pliers and (2) knife holders.

Grooved sides and slotted table back for overboard drainage.

Levelock quick release all angle rod holder mount

Made in the USA

Comes complete.  No additional mounting hardware required.

Frequently Asked Questions

• What is the Magma 20" Bait & Fillet Table with Rod Holder LeveLock Mount used for? The Magma 20" Bait & Fillet Table with Rod Holder LeveLock Mount provides a work surface for filleting fish or serving food and beverages. Its high-density polyethylene construction is FDA approved for food preparation and service, while the slotted table back allows water to drain from the work surface.
• What is included with the Magma Bait & Fillet Table? The table comes complete with the LeveLock All-Angle Fish Rod Holder Mount, so no additional mounting hardware is required. The table also includes two fillet knife holders and a receptacle for fishing pliers. Rod holders, fillet knives, and pliers are not included.
• How does the LeveLock rod holder mount adjust? The LeveLock All-Angle Fish Rod Holder Mount uses a quick-release cam-action design for all-angle adjustment. Its 1-1/2-inch 18-8 stainless steel tube fits into most cross-pin type rod holders in eight different rotational positions and folds flat for storage.
• What is the Magma Bait & Fillet Table made from? The table is constructed from 100% UV-stabilized, compression-molded, high-density, color-core polyethylene. The material is FDA approved for food preparation and service and is designed not to crack, peel, or mildew or absorb bacteria and fish odors.
• Does the Magma 20" Bait & Fillet Table have storage for fishing tools? Yes. The table has two dedicated fillet knife holders and a receptacle for fishing pliers. These built-in storage features keep commonly used fishing tools accessible while preparing or cleaning fish.

Magma Marine 31" x 12.5" Bait/Fillet Table

Magma’s original “Bait/Filet Mate” tables have an attractive new look, BLACK! This new color core material has thin white cap layers and a bright black center. Our “Magma” logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch. Not just designed for bait preparation or fish cleaning these tables are FDA approved for food preparation and service. Constructed with the finest commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical, and more sanitary than wood filet tables. These tables will not crack, peel, mildew, absorb bacteria or fish odors, allowing you virtually maintenance free use. Equipped with (2) knife holsters that accommodate large filet knives, handy receptacle for Pliers, rounded edges / corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.

Large enough for any bait work or filleting those big ones that did not get away, this table is the perfect addition for any Fisherman.

“Single-Mount” (SM) mounting hardware is required for complete installation. Sold separately.Fish Rod Holder, Fish Rod Holder Mount, knife and pliers not included.

Features:

100% UV Stabilized Compression Molded High-Density Color Core Polyethylene

FDA Approved For Food Preparation and Service

Will Not Crack, Peel, Mildew, Absorb Bacteria, or Fish Odors

Pliers Storage and (2) Redesigned Knife Holsters

Grooved Sides and Slotted Table Back for Overboard Drainage

Magma Offers the Largest Selection of Mounting Options Available

Frequently Asked Questions

• What is the Magma Marine 31" x 12.5" Bait/Fillet Table used for? The Magma Marine Bait/Fillet Table is designed for bait preparation, fish cleaning, and filleting. Its 31" x 12.5" work surface is also FDA approved for food preparation and service, making it suitable for more than just fishing-related tasks.
• What is the Magma Bait/Fillet Table made from? The Magma Bait/Fillet Table is constructed from UV stabilized compression molded high-density polyethylene with a black color core and thin white cap layers. The material is designed to resist cracking, peeling, mildew, bacteria absorption, and fish odors.
• Does the Magma Marine Bait/Fillet Table provide drainage? Yes. The table has grooved side channels and a slotted table back that allow drainage from the work surface. This design helps direct scales and residue away from the work area when preparing, cleaning, or filleting fish.
• Does the Magma Bait/Fillet Table include knife and pliers storage? Yes. The table includes two redesigned knife holsters that accommodate large filet knives and a dedicated receptacle for pliers. The knife and pliers themselves are not included with the table.
• What mounting hardware is required for the Magma Marine Bait/Fillet Table? Single-Mount (SM) mounting hardware is required for complete installation and is sold separately. The table itself does not include the mounting hardware. A fish rod holder and fish rod holder mount are also not included.
• Is the Magma Marine Bait/Fillet Table approved for food preparation? Yes. The Magma Marine Bait/Fillet Table is FDA approved for food preparation and service. Its high-density polyethylene construction is designed for practical use and is described as more sanitary than wood filet tables.

Magma Marine 20" x 12.75" Bait/Fillet Table

Magma's original "Bait/Filet Mate" tables have an attractive new look, BLACK. This new color core material has thin white cap layers and a bright black center. Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch. Not just designed for bait preparation or fish cleaning these tables are FDA approved for food preparation and service. Constructed with the finest commercial quality UV stabilized compression molded high-density polyethylene that is virtually indestructible, practical and more sanitary than wood filet tables. These tables will not crack, peel, mildew, absorb bacteria or fish odors, allowing you virtually maintenance free use. Equipped with (2) redesigned knife holsters that now accommodate larger filet knives, handy receptacle for Pliers, rounded edges/corners for safety and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting

Features:

FDA approved for food preparation and service

Convenient ruler and Magma logo engraved into back panel

Grooved sides and slotted back for overboard drainage

UV stabilized compression molded high-density color core polethylene