Keel Guard

Megaware SkegPro Skeg Protector

The Megaware SkegPro protects your motor's skeg against harsh marine environments. It conforms to your lower unit to ensure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant, which could cause corrosion or freezing. SkegPro's mirror-polished finish creates a custom look and lasting protection. Megaware's SkegPro is easy to install and can be done in minutes.

Features:

Mirror polished finish

Protects against ramp dragging, rocks, debris, and submerged objects

Drain hole prevents corrosion and freezing

Do-it-yourself installation takes less than 10 minutes

Three year warranty

How to Install Megaware SkegPro Skeg Protector

If needed, repair skeg to ensure proper fit before installing SkegPro.

To enhance appearance, prime and paint skeg before installing the SkegPro.

Using a leather, rubber, or wooden mallet, place the SkegPro on the skeg and gently tap on it to get it started.

Drive it on with the mallet until fully seated.

Using the pre-drilled mounting hole as a pilot hole, drill the skeg using a 3/16" drill bit.

Install the stainless steel hardware.

Megaware SkegPro Application Guide

Evinrude/Johnson

665 - 115 HP 200 - up

667 - 200 HP High Output 2003-2007

Honda

665 - BF 50 HP 2008

Mercruiser

667 - Bravo One 1992 - up

667 - Bravo Three 1992 - up

668 - Bravo Two 1994 - up

Mercury

665 - 15 HP Big Foot 4 Stroke 2003 - up

665 - 25 HP Big Foot 4 Stroke 1998 - up

665 - 40, 50 HP 1995 - up

665 - 60 HP 4 Stroke + EFI

Yamaha

665 - 40, 50, 60 HP 4 Stroke (does not fit lower HP)

667 - VMAX 250 HPDI 2003

Click to Download Megaware SkegPro Installation Instructions

Frequently Asked Questions

• What does the Megaware SkegPro Skeg Protector do? The Megaware SkegPro Skeg Protector helps protect a motor's skeg from ramp dragging, rocks, debris, submerged objects, and harsh marine environments. Its mirror-polished finish provides a custom look, while the drain hole helps prevent water from collecting and remaining stagnant, which could contribute to corrosion or freezing.
• Which engines and lower units is the Megaware SkegPro designed to fit? The application guide lists specific Evinrude/Johnson, Honda, Mercruiser, Mercury, and Yamaha applications. Fitments include select horsepower ranges and models such as Mercruiser Bravo One, Bravo Two, and Bravo Three, Mercury Big Foot and 40–60 HP applications, and Yamaha 40–60 HP 4-stroke models. Verify your specific application before installation.
• How do you install the Megaware SkegPro Skeg Protector? If necessary, repair the skeg to ensure proper fit. Place the SkegPro onto the skeg and gently start it using a leather, rubber, or wooden mallet, then drive it fully into position. Use the pre-drilled mounting hole as a pilot hole, drill with a 3/16-inch bit, and install the stainless steel hardware.
• How long does it take to install the Megaware SkegPro? The product description states that the do-it-yourself installation takes less than 10 minutes. The installation process includes seating the protector with a mallet, drilling a 3/16-inch pilot hole through the skeg using the pre-drilled mounting hole, and installing the stainless steel hardware.
• Does the Megaware SkegPro have a drain hole? Yes. The Megaware SkegPro has a drain hole designed to prevent water from collecting and remaining stagnant inside the protector. According to the product description, this helps prevent conditions that could cause corrosion or freezing.
• What should I do to prepare the skeg before installing the Megaware SkegPro? If needed, repair the skeg to ensure proper fit before installing the SkegPro. The installation instructions also recommend priming and painting the skeg before installation if you want to enhance its appearance. The SkegPro is then seated onto the sk…

Megawear PontoonGuard for Pontoons 21-25ft.

Protect your Pontoon from scratches and scrapes with a Megaware PontoonGuard! The PontoonGuard provides protection to the side of the tubes against abrasion an chafing caused by docks, other pontoons, and hidden obstacles. Not only does a PontoonGuard provide protection, but it also features a 3M reflective strip to enhance the visibility of the pontoon in nighttime or low-light conditions when illuminated by a light source such as headlights or search lights.

Key Features:

Protect Vulnerable and Exposed Areas of your Pontoon

Make Your Vessel more visible during night operations or while anchored or beached

Avoid unsightly dents and scrapes from docking your pontoon

Add a custom sleek look to your pontoon

Super strong 1/4" thick ultra-tough polymer composite

Machined contoured leading edge

Contoured sides for clean, tight seal (no sealants needed)

3M Reflective strip for increased visibility and safety

Included:

(2) 20 ft. PontoonGuards

Burnishing tool

3M Scotch-Brite

Three year adhesion warranty

Installation Instructions:

• It is recommended that the adhesive is not applied when temperatures are below 65 degrees F or above 100 degrees F. Remember that even if the air temperature is above 65 degrees F, the aluminum surface on your pontoon may be lower.
• Wash - Thoroughly wash your pontoon to remove any algae or oxidization. Remove any waxes or metal protectants as per manufacturer recommendations. Clean the area where the PontoonGuard will be installed with isopropyl (rubbing) alcohol.
• Measure - Measure the length of the pontoon tube. If the PontoonGuard is too long, trim the PontoonGuard with a utility knife on the rear squared edge for a precise fit. Measure down from the top deck to the find the center of your pontoon. Once you have found the center, measure up 1.75" and make a mark using a pencil. This is where the top of the PontoonGuard will be installed. Measure down from the center 1.75" to mark the bottom of the guard. Continue to measure and mark every 18-24" down the length of the tube.
• Mask - Align a strip fo masking tape along the top marks and continue down the entire length of the pontoon. Repeat using the lower marks. Verify that the spacing between the masking tape is 3.5 inches and that the alignment is straight.
• Etch - Using the provided 3M Scotch-Brite Pad, thoroughly etch the entire length of the pontoon within the masked area.
• Clean - Thoroughly clean the area again with isopropyl alcohol, using paper towels or a clean rag. Repeat until the rag or paper towel show no signs of residue. Note: Do not use paint thinner or other petroleum based cleaners as they can leave a film that will compromise the bond of the 3M adhesive.
• Apply - Pull back 8-10" of each of the 3 red protective liners from the front of the guard. Do not touch the adhesive with your hands, as any contamination may compromise the bond. Carefully align the PontoonGuard with the masking tape and press it firmly in place using your hand or the supplied burnishing tool. NOTE: Once the adhesive touches the surface it will become a permanent bond and will not release without tearing the adhesive)Continue to align the PontoonGuard until the entire guard is installed. Once fully attached, use the burnishing tool to apply additional pressure to the entire PontoonGuard, ensuring the pressure sensative adhesive is firmly attached.
• To keep your PontoonGuard looking new, clean with mild soap and water.If you wish to reapply any metal protectants or clean the tubes using acid based or chemical cleaners, the PontoonGuard must be masked to protect the finish and reflective film.

Megaware Skeg Guard Stainless Steel Skeg Repair/Protection

Not sure which SkegGuard fits your boat? See our application chart below or CLICK HERE to Download application chart

Megaware SkegGuards deliver dependable protection for your outboard motor's skeg using marine-grade 316 stainless steel construction. The reinforced 3mm wear-tab shields against rocks, debris, and trailering damage while maintaining optimal performance. Installation takes just 10 minutes with basic tools - no marine technician required. These guards can be fitted over broken skegs with as little as 2 inches remaining, providing a cost-effective alternative to expensive welding repairs. The contoured design includes a strategic drain hole to prevent corrosion and freezing. Compatible with Mercury, Yamaha, Honda, Suzuki, and other major brands, each SkegGuard features self-locking hardware and comes backed by a three-year warranty.

Key Features:

Made from mirror-polished, marine grade 316 stainless steel.

Thickened lower wear tab reduces ramp dragging and is ideal for river-running.

The drain hole prevents corrosion/freezing for longer wear.

Innovations will not compromise skeg performance.

Does not require a marine technician to install.

May be implemented with 2-3 inches of skeg remaining.

Three-year warranty.

Skeg Guard Installation Instructions:

• Secured with self-locking hardware, installation takes less than 10 minutes. If your skeg is already broken, Megaware's SkegGuard can be installed with as little as 2 inches of skeg remaining.

Using a mallet (leather, rubber, or wooden), place the Megaware SkegGuard on the skeg and gently tap on it. Once in place, drive it on with the mallet until fully seated.

Using the two pre-drilled mounting holes in the SkegGuard as pilot holes, drill the skeg using a 1/4" drill bit.

Install the stainless steel hardware using the hex-key tools supplied with the product.

Megaware SkegGuard Application Guide

Megaware's SkegGuard is available in models to fit virtually any skeg. Models for motors include Mercury, Mariner, Evinrude, Johnson, Honda, Nissan, OMC, Tohatsu, Suzuki, Volvo, and Yamaha.

JOHNSON - Does not fit Lightning Gearcase

27101 - 100, 115, 120, 140 1980 - 2001

EVINRUDE/JOHNSON - Does not fit Lightning Gearcase

27131 - 40, 50, 55, 60 2 Stroke E-TEC 2004-Present; 60 1996 - 2012

27121 - 65 2 Stroke E-TEC 2013 - 2015

27121 - 75, 90,115, 130 2 Stroke E-TEC 20" Shaft 2006 - Present

27081 - 90, 115, 130 E-TEC 25"-30" Shaft 2006 - Present

27081 - 150, 175, 200 20" Shaft E-TEC 2006 - Present

27091 - 135, 175, 200 25"-30" Shaft E-TEC 2 Stroke 2006 - 2014

27091 - 150 25"-30" Shaft E-TEC 2006 - Present

27091 - 225, 250, 300 E-TEC 2002 - 2014

27281 - 150, 175, 200, 225, 250, 300 E-TEC G2 (Curved) 2015 - Present

HONDA

27171 - 35, 40, 45, 50 4 Stroke 1991 - Present

27171 - 90 4 Stroke & V-TEC 2008 - Present

27071 - 60, 75 4 Stroke 2010 - Present

27071 - 75, 90, 115 4 Stroke 1995 - 2007

27271 - 115 4 Stroke 2010 - Present

27271 - 135, 150, 200, 225 4 Stroke 2004 - Present

MARINER

27341 - 40, 50, 60 2 & 4 Stroke 2003 - 2011

27071 - 50, 60 Bigfoot 2003 - 2011

27071 - 70, 90, 100, 115, 125 2/4 Stroke & Optimax 1983 - 2011

27211 - 150, 175, 200, 225, 250, 275, 300 Verado 2005 - 2011

27061 - 135, 150, 175, 200 Optimax 2 Stroke 1978 - 2011

27061 - 135, 150, 175, 200 4 Stroke 2005 - 2011

MERCURY

27021 MERCRUISER - Alpha I 1985 - 1990

27031 MERCRUISER - Alpha I Generation II 1991 - Present

27051 MERCRUISER - Bravo I & III 1990 - Present

27011 MERCRUISER - Pre-Alpha I Drives 1973 - 1984

27071 - 40, 50, 60 Bigfoot 2001 - 2013

27071 - 40, 50, 60 Command Thrust 2014 - Present

27071 - 50 4 Stroke 2006 - 2014

27071 - 75, 90, 115 2/4 Stroke & Optimax 2003 - 2014

27071 - 125 2 Stroke 2000 - …

Megaware Keel Guard Self Adhesive Polymer Boat Keel Protector

The Megaware Keel Guard protects your boat's hull from scrapes and cuts. Easy to install, this boat keep protector is available in a variety of colors and sizes. Keel Guard is constructed from a durable and shock absorbent polymer composite. While tough, Keel Guard is also very pliable to conform to the shape of any boat keel. During application, the keel protector’s contoured edge creates a clean, tight seal. Megaware Keel Guards use 3M adhesives which create strength, while permanently bonding and sealing the boat keel protector to the hull’s surface.

Features:

Protect against abrasive sand, rocks, concrete ramps and oyster beds

Eliminate costly repairs

Patented drag reduction design - will not slow your boat down

UV-stabilized colors

Increase the value of your boat

No messy sealants needed

Manufacturer lifetime warranty

Made in the USA

Keel Guard Size Chart

KeelGuard Size

Boat Length

5 ft

up to 16 ft

6 ft

up to 18 ft

7 ft

up to 20 ft

8 ft

up to 22 ft

9 ft

up to 24 ft

How to Install a Boat Keel Guard

The Megaware KeelGuard is a very simple product to install; however, the following instructions must be strictly followed. Any short cuts or missed steps will jeopardize and compromise the full bonding capabilities of the 3M adhesive. For best results, the KeelGuard should be installed at an ambient temperature of 60º or above. Typically, the Megaware KeelGuard is mounted 4 to 6 inches above the waterline on the bow, ending 2 to 3 feet or more beyond the lowest point of the Keel. If protection is required above the Boweye, a separate Bow Guard is available in 1ft to 3ft lengths.

Etch the surface where the Keel Guard will be installed.

Any fiberglass mold release agents and wax must be removed.

Use the included 3M Scotch-Brite pad.

If your boat has antifouling bottom paint applied, it must be removed to expose the original gelcoat where the Keel Guard will be installed.

Thoroughly clean the area with isopropyl alcohol.

Use paper towels or a clean rag.

Repeat until there is no sign of residue.

Do not use paint thinner or other patroleum-based cleaners.

Prime with the included 3M #94 Keel Primer

Apply a very thin coat of the included primer.

Follow the instructions attached to the applicator.

Ensure the entire area is primed, especially the edges.

Apply your Keel Guard

Pull back the center liner approximately 8-10 inches exposing the 3M adhesive.

Do not touch the adhesive with your hands.

Center the Keel Guard along the keel and press it firmly in place using your hand or supplied burnishing tool.

Continue to align the Keel Guard and peel back the center strip until the entire center is attached to the boat.

Starting at the bow, pull back the protective liner on either side of the Keel Guard.

Begin pressing it on with the burnishing tool.

Work from the center out to ensure no air is trapped between the hull and adhesive.

Continue working toward the rear until completed.

Repeat the process for the other side.

Once fully attached, use the burnishing tool to apply additional pressure to the entire Keel Guard, ensuring it is firmly attached to your boat. A rubber mallet may also be used to apply even more force to the adhesive. No curing time is required.

Click to Download Keel Guard Application Instructions

Frequently Asked Questions

• What is the Megaware Keel Guard Self Adhesive Polymer Boat Keel Protector designed to do? The Megaware Keel Guard protects a boat's hull and keel from scrapes and cuts caused by abrasive sand, rocks, concrete ramps, and oyster beds. It is made from a pliable, shock-absorbent polymer composite that conforms to the shape of the keel and uses 3M adhesive for permanent bonding.
• What size Megaware Keel Guard should I use for my boat? Megaware Keel Guard sizes are based on boat length. The 5-foo…