- All categories
Your cart
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Adhesive
21 products
21 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$21.19
Hawk Epoxy F4 Bridging Adhesive Filler
The Sea Hawk Hawk Epoxy F4 Bridging Adhesive Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. This easy to use adhesive has excellent gap filling and filleting qualities. The mixture blends with many different types of wood to allow for a natural looking fillet or gap fill.
Sea Hawk Hawk Epoxy F4 Bridging Adhesive Filler compares to West System 406 Filleting Blend
Features:
Thickens to a brown color
Ideal for gap filling and filleting
Blends with many types of wood for a natural looking fillet or gap fill
Directions For Use:
Mix the Hawk Epoxy resin and catalyst
Mix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved
Depending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:
- If you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag
- For laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency
- To ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin/catalyst/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.
- For general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.
Click here to download Hawk Epoxy Application guide
$11.39
Hawk Epoxy F3 Light Density Adhesive MicroFiber Filler
The Sea Hawk Hawk Epoxy F3 Light Density Adhesive MicroFiber Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for many substrates, especially wood. The mixture creates a multipurpose adhesive that provides excellent substrate wetting and penetrating characteristics. Increases impact and abrasion resistance.
The Sea Hawk Hawk Epoxy F3 Light Density Adhesive MicroFiber Filler compares to 403 Microfibers
Features:
Thickens to an off white color
Ideal for bonding many substrates, especially wood
Creates a multipurpose adhesive for many of other substrates
Provides excellent substrate wetting and penetrating characteristics
Increases impact and abrasion resistance
Directions For Use:
Mix the Hawk Epoxy resin and catalyst
Mix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved
Depending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:
- If you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag
- For laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency
- To ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin/catalyst/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.
- For general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.
Click here to download Hawk Epoxy Application guide
$11.39
Hawk Epoxy F2 Structural Adhesive Filler
The Sea Hawk Hawk Epoxy F2 Structural Adhesive Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for bonding, gap filling, and filleting. When used the mixture allows for sag free and easy flow properties for vertical and overhead applications.
The Sea Hawk Hawk Epoxy F2 Structural Adhesive Filler compares to 406 Colloidal Silica
Features:
Thickens to an off white color
General purpose thickening additive
Designed for bonding, gap filling, and filleting
Workable consistency allows for sag-free and easy flow
Properties for vertical and overhead applications
Directions For Use:
Mix the Hawk Epoxy resin and catalyst
Mix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved
Depending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:
- If you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag
- For laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency
- To ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin/catalyst/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.
- For general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.
Click here to download Hawk Epoxy Application guide
$14.99
Hawk Epoxy F1 High Load Adhesive Fiber Filler
The Sea Hawk Hawk Epoxy F1 High Load Adhesive Fiber Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for bonding hardware and other applications with dissimilar materials. When used the mixture will maximize bond strength for anticipated high loads.
The Sea Hawk Hawk Epoxy F1 High Load Adhesive Fiber Filler compares to 404 High Density Filler
Features:
Thickens to a light grey color
Easy to use adhesive
Designed for bonding hardware
Maximizes bond strength for anticipated high loads
Directions For Use:
Mix the Hawk Epoxy resin and catalyst
Mix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved
Depending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:
- If you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag
- For laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency
- To ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin/catalyst/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.
- For general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.
Click here to download Hawk Epoxy Application guide
$13.19
Permatex All-Purpose Spray Adhesive 16oz 82019
This spray adhesive is formulated for both permanent and repositionable bonding that won't bleed through. This unique formula resists water and humidity to create a lasting bond on a wide variety of surfaces. Able to be applied to both porous and onporous materials this adhesive will not shrink over time.
All-Purpose Spray Adhesive Features
Resists water and humidity
Adheres to porous and nonporous materials
Allows permanent and repositionable bonding
Won't bleed through
This adhesive spray is excellent at attaching upholstery cloth, carpeting, floor mats, insulation, and more!
$19.39
Permatex High Performance Thread Sealant 50ml 56521
Formulated specifically for tapered metal pipe thread fittings, this sealant cures rapidly and can withstand up to 10,000PSI.
Why you shoul use Permatex Thread Sealant
Allows repositioning after application
Withstands up to 10,000PSI
Prevents galling and protects threads
Formualted for metal tapered pipe thread fittings
This thread sealant also provides rust and corrosion resistance to the thread. Prevents leakage from vibrations, temperature changes, and extreme pressure.
From $193.14
Megaware Keel Guard Self Adhesive Polymer Boat Keel Protector
The Megaware Keel Guard protects your boat's hull from scrapes and cuts. Easy to install, this boat keep protector is available in a variety of colors and sizes. Keel Guard is constructed from a durable and shock absorbent polymer composite. While tough, Keel Guard is also very pliable to conform to the shape of any boat keel. During application, the keel protector’s contoured edge creates a clean, tight seal. Megaware Keel Guards use 3M adhesives which create strength, while permanently bonding and sealing the boat keel protector to the hull’s surface.
Features:
Protect against abrasive sand, rocks, concrete ramps and oyster beds
Eliminate costly repairs
Patented drag reduction design - will not slow your boat down
UV-stabilized colors
Increase the value of your boat
No messy sealants needed
Manufacturer lifetime warranty
Made in the USA
Keel Guard Size Chart
KeelGuard Size
Boat Length
5 ft
up to 16 ft
6 ft
up to 18 ft
7 ft
up to 20 ft
8 ft
up to 22 ft
9 ft
up to 24 ft
How to Install a Boat Keel Guard
The Megaware KeelGuard is a very simple product to install; however, the following instructions must be strictly followed. Any short cuts or missed steps will jeopardize and compromise the full bonding capabilities of the 3M adhesive. For best results, the KeelGuard should be installed at an ambient temperature of 60º or above. Typically, the Megaware KeelGuard is mounted 4 to 6 inches above the waterline on the bow, ending 2 to 3 feet or more beyond the lowest point of the Keel. If protection is required above the Boweye, a separate Bow Guard is available in 1ft to 3ft lengths.
Etch the surface where the Keel Guard will be installed.
Any fiberglass mold release agents and wax must be removed.
Use the included 3M Scotch-Brite pad.
If your boat has antifouling bottom paint applied, it must be removed to expose the original gelcoat where the Keel Guard will be installed.
Thoroughly clean the area with isopropyl alcohol.
Use paper towels or a clean rag.
Repeat until there is no sign of residue.
Do not use paint thinner or other patroleum-based cleaners.
Prime with the included 3M #94 Keel Primer
Apply a very thin coat of the included primer.
Follow the instructions attached to the applicator.
Ensure the entire area is primed, especially the edges.
Apply your Keel Guard
Pull back the center liner approximately 8-10 inches exposing the 3M adhesive.
Do not touch the adhesive with your hands.
Center the Keel Guard along the keel and press it firmly in place using your hand or supplied burnishing tool.
Continue to align the Keel Guard and peel back the center strip until the entire center is attached to the boat.
Starting at the bow, pull back the protective liner on either side of the Keel Guard.
Begin pressing it on with the burnishing tool.
Work from the center out to ensure no air is trapped between the hull and adhesive.
Continue working toward the rear until completed.
Repeat the process for the other side.
Once fully attached, use the burnishing tool to apply additional pressure to the entire Keel Guard, ensuring it is firmly attached to your boat. A rubber mallet may also be used to apply even more force to the adhesive. No curing time is required.
Click to Download Keel Guard Application Instructions
Frequently Asked Questions
- What is the Megaware Keel Guard Self Adhesive Polymer Boat Keel Protector designed to do? The Megaware Keel Guard protects a boat's hull and keel from scrapes and cuts caused by abrasive sand, rocks, concrete ramps, and oyster beds. It is made from a pliable, shock-absorbent polymer composite that conforms to the shape of the keel and uses 3M adhesive for permanent bonding.
- What size Megaware Keel Guard should I use for my boat? Megaware Keel Guard sizes are based on boat length. The 5-foo…
From $207.65
KeelShield Self Adhesive Hull Protector
#1 Keel protection for your boat.
The keel of your boat is the most vulnerable part of your boat and is susceptible to damage from concrete, docks, beaches, and rocky shores. It is the center line running down the bottom of the hull of your boat. It is a structural element designed to allow the boat to stay upright and slice through the water and is the first contact with the water but also a vulnerable spot for damage. Hull protectors provide the shield you need to protect the Keel of your boat.
Keelshield Self Adhesive Hull Protectors are the industry leader in hull protectors. They are made with pure Urethane Polymers, one the strongest most durable materials. They work on most fiberglass or aluminum boats and are easy to install. No need for a marine mechanic, these hull protectors have an easy do it yourself installation. Available in 11 colors you are sure to find one to match your boat. Using the Keelshield Self Adhesive Protector helps maintain the value of your boat and guarantees to last the lifetime of your boat.
Installation is easy, just prep, peel the stick. It is made with the exclusive 3M Adhesive system and is guaranteed to stay on. This product will not affect the performance of your boat.
Key Features:
Easy, Do It Yourself Installation
Guaranteed to last the lifetime of your boat
Available in 11 colors and various lengths
Prevent costly repairs
Maintain the value of your boat
100% Made in the USA
Works on fiberglass and most aluminum boats
KeelShield Sizing Guide
KeelShield can adhere to boats made of fiberglass, urethane, treated wood, and all metals. Download the guides below for more fit and sizing information. Please note that KeelShield will adhere to crafts made of fiberglass, urethane, treated wood and all metals. It will not work on pontoon boats, boats whose trailers have weight bearing rollers, bunks or pads that the KeelShield will rest on or will come into contact with.
Keel Shield Size
Boat Length
4 ft
13 ft and Less
5 ft
up to 14 ft
6 ft
15 to 16 ft
7 ft
17 to 18 ft
8 ft
19 to 21 ft
9 ft
22 to 24 ft
10 ft
25 to 26 ft
11 ft
27 to 28 ft
12 ft
29 to 30 ft
If you're unsure if KeelShield is compatible with your boat, please contact the manufacturer to confirm compatibility prior to purchasing.
KeelShield Installation Video
Click here to download KeelShield Fiberglass Application Instructions
Click here to download KeelShield Aluminum Application Instructions
$173.04
Easy, Do It Yourself Installation
Guaranteed to last the lifetime of your boat
Available in 11 colors and various lengths
Prevent costly repairs
Maintain the value of your boat
100% Made in the USA
Works on fiberglass and most aluminum boats
The keel of most boats is the center line running down the bottom of your boat. It generally protrudes and slices into the water. Because of this, the keel both slices the water first, and also bumps into concrete, ramps, docks, and rocky shores first. But it doesn’t have to. KeelShield was developed to protect your most vulnerable, and constant point of contact. Made of pure Urethane Polymers, this 5” wide rugged shield is the strongest and most durable protection for you keel from abrasions, scratches, and scars.
KeelShield is easy to install, just Prep-Peel-Stick (see our video below). Once its on you are good to go. Installation does not require time to cure. And with our exclusive 3M adhesive system, it stays on, we guarantee it.
No, KeelShield will not work on the Yamaha VX 110 and the Sea Doo 4-Tec Hull design. KeelShield is 5" wide and the jet ski hull needs to be smooth with no ridges for the product to work.
$5.99
Sticker Off! Decal Adhesive Remover
This boat decal adhesive remover features an environmentally friendly 2 oz pour top recyclable bottle. It works on any decal adhesive, number plate backgrounds, OEM decals, boat registration numbers, sponsorship decals, graphics kits, racing numbers and much more. With this remover, there will be no more sticky residue left to mess up your new decals.
Features:
Environmentally Friendly
Works On Any Decal Adhesive, Number Plate Backgrounds and OEM Decals
Works On Registration Numbers, Sponsorship Decals, Graphics Kits and Racing Numbers
2 oz. Pour Top Recyclable Bottle
From $35.94
Flitz Ceramic Sealant
This Ceramic Sealant by Flitz is designed to give almost any hard surface a hard-shell, water resistant finish. This long lasting protection is perfect for boats, RV's, cars, counter tops, firearms, bath fixtures and so much more. The user friendly spray bottle comes in multiple sizes and creates an instant spray on protection without needing training or equipment. The advanced formula can be applied in minutes and provides Flitz hydrophobic nano-ceramic protection. Flitz ceramic coating is made in the USA and is a perfect eco friendy economic way to protect your ride.
Flitz ceramic coat offers a streak free look that will increase your shine without buffing, talc or whitening. It is resistant to sunlight and engine heat and will nto evaporate like wax. Less washing and no more waxing means you get more time out on the water.
Flitz ceramic sealant seals and protects paints, clearcoats, fiberglass, gelcoats, all metals, plastics, eisenglass, glass, solid surfaces, marble, granite, quartz, and corian.
Features:
Eco Friendly
Water Resistant
Water based
Silicone Free
CiverageL
Streak Free
Hard Shell
Up to 1 Year Protection
Coverage:
16oz: 2,200 sq ft
32oz: 4,400 sq ft
Protects Against:
UV Rays
Color Fade
Salt
Brake Dust
Diesel Dust
Calcium/Water Stains
Tarnish
Tire Rot
Oxidation
Dirt
Bugs
Tree Sap
Bird Droppings
Yellowed Headlights
Application Information
Spray the sealant onto a clean surface and distribute with a microfiber or applicator in 3' x 3' sections. Do NOT let dry
Clean with a clean, dry Flitz microfiber. When saturated use a new, dry microfiber.
For best results apply in temperatures 40° - 85° A second coat can be applied after 48 hours.
Store at room temperature
Do NOT use on flooring or any walking surfaces.
From $18.49
Boatlife "Release" Adhesive and Sealant Remover
Boatlife's Release is ideal for removing cured silicone, polyurethane, and polysulfide. Use a scraping tool and Release to remove cured sealants from fiberglass, wood, metal, and glass. It is ideal on residue from decals, tapes, labels and adhesives, and is safe on most carpeted, vinyl, plastic and painted surfaces. Release simplifies the use of sealants, allowing for a fast cleanup.
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
From $13.49
Boatlife Marine Silicone Rubber Sealant
Boatlife Marine Silicone Rubber Sealant is an all-purpose, 100% marine high quality silicone sealant. This sealant is non-corrosive, acid-free, non-yellowing, mildew-resistant, and low-odor. This silicone rubber sealant is for use above or below the waterline. Features superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Boatlife's Silicone Rubber Sealant retains flexibility and tensile strength even after years of exposure. This product is great for applications where speed is important - it is tack-free in 30 minutes or less and fully cured in 24 hours.
Features:
All-purpose high quality silicone sealant
Will not shrink, crack, or dry out
Retains flexibility and tensile strength after years of exposure
Will not corrode metal or electronics
Neutral curing system
Sizes Available:
Squeeze Tube
1 oz
2.8 oz
Cartridge (for caulking gun)
10.6 oz
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
Frequently Asked Questions
- What is Boatlife Marine Silicone Rubber Sealant used for? Boatlife Marine Silicone Rubber Sealant is an all-purpose 100% silicone sealant for marine applications above or below the waterline. It provides flexible adhesion to fiberglass, plastic, metal, and wood and is designed to retain its flexibility and tensile strength after prolonged exposure.
- Can Boatlife Marine Silicone Rubber Sealant be used above and below the waterline? Yes. Boatlife Marine Silicone Rubber Sealant is formulated for use both above and below the waterline. It is suitable for applications involving fiberglass, plastic, metal, and wood where a flexible marine silicone sealant is needed.
- How quickly does Boatlife Marine Silicone Rubber Sealant cure? Boatlife Marine Silicone Rubber Sealant becomes tack-free in 30 minutes or less and fully cures in approximately 24 hours. Its relatively fast tack-free time makes it suitable for applications where a quick initial set is important.
- Is Boatlife Marine Silicone Rubber Sealant safe for use around metal and electronics? Yes. The sealant uses a neutral curing system and is described as non-corrosive and acid-free. It is also formulated not to corrode metal or electronics, making it suitable for applications where these materials may be present.
- What sizes of Boatlife Marine Silicone Rubber Sealant are available? Boatlife Marine Silicone Rubber Sealant is available in squeeze tubes and cartridges. Squeeze tube sizes include 1 oz and 2.8 oz, while the cartridge size is 10.6 oz and is designed for use with a caulking gun.
From $13.99
Boatlife Life-Seal Silicone-Polyurethane Sealant
Boatlife Life-Seal is a unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware.
Will adhere to metal, glass, wood, Lexan, ABS, and certain other materials.
Can be removed without damaging gel-coat.
Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials.
Cures in presence of water.
Mildew resistant and acid free.
Sizes Available:
Squeeze Tube
1 oz
2.8 oz
Cartridge (for caulking gun)
10.6 oz
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
How to Use Boatlife Life Seal Sealant
Before applying, ensure entire surface is clean and oil free.
Life Seal can either be applied using the squeeze tube or via caulking gun (using 10.6 oz cartridge)
Life Seal will skin over in 10 minutes.
Allow 24 hours to fully cure.
Frequently Asked Questions
- What is Boatlife Life-Seal Silicone-Polyurethane Sealant used for? Boatlife Life-Seal Silicone-Polyurethane Sealant is a marine sealant formulated especially for fiberglass. It provides a durable, watertight seal for joints subject to structural movement and can be used above or below the waterline for applications such as decks to hulls, thru-hull fittings, vinyl ports, windshields, and marine hardware.
- What materials can Boatlife Life-Seal adhere to? Boatlife Life-Seal is designed to adhere to fiberglass and can also adhere to metal, glass, wood, Lexan, ABS, and certain other materials. Surfaces should be clean and free of oil before application to help ensure proper adhesion.
- Can Boatlife Life-Seal be used above and below the waterline? Yes. Boatlife Life-Seal can be used for marine sealing applications both above and below the waterline. It cures in the presence of water and is formulated to provide a permanent watertight seal while accommodating structural movement.
- How do I apply Boatlife Life-Seal Sealant? Before application, make sure the entire surface is clean and oil free. Life-Seal can be applied directly from the squeeze tube or with a caulking gun when using the 10.6 oz cartridge. Apply the sealant to the intended joint or area and allow it to cure according to the stated curing time.
- How long does Boatlife Life-Seal take to cure? Boatlife Life-Seal skins over in approximately 10 minutes and requires 24 hours to fully cure. The product is formulated as a fast-curing marine sealant and can cure in the presence of water.
- Where should Boatlife Life-Seal not be used? Boatlife Life-Seal is not recommended for ferro cement hulls, impregnated wood, or oil-soaked materials. Before application, surfaces should be clean and free of oil. The product description also identifies fiberglass as its specifically formulated application material.
From $13.99
Boatlife Life Calk Polysulfide Sealant
Boatlife's Life-Calk is a long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted, and used above and below the waterline. Life Calk Sealant is tack-free in 1 to 3 days, and fully cures in 7-10 days (weather dependent). This polysulfide sealant has excellent resistance to teak oils, gasoline and diesel fuel. Boatlife Life-Calk is ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams.
Features:
Will bond to fiberglass, wood, metal, glass, and itself.
Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities.
Can be applied underwater for emergency repairs.
Can be applied to damp surfaces.
Sizes Available:
Squeeze Tube
1 oz
2.8 oz
Cartridge (for caulking gun)
5.2 oz
10.6 oz
**Not compatible with all paints - Sikkens, Cetol, Deks, Olje
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
Tips for Using Boatlife's Life-Calk Sealant
To speed cure time, spray a little water onto one-part Life-Calk
To clean up tools, equipment and uncured Life-Calk, use Boatlife Life-Calk Solvent and Cleaner or Boatlife Release.
In cold areas, warm cartridges and tubes before use.
$22.99
Beckson 3.5" X 12" Self-Adhesive Non-Skid Step Pad
This item has been discontinued by the manufacturer and is no longer available.
This Beckson Self-Adhesive Non-Skid Step Pad is self-adhesive and easily cut for a custom fit. A heavy-duty 3" wide tread pad for stepping surfaces, this non-skid step pad will not crack or discolor. It is designed to withstand salt water and low temperatures.
Features:
Self-Adhesive
Non-Skid
Easily Cut For Custom Fit
Heavy Duty
Crack Resistant
Discolor Resistant
Withstands Salt Water and Low Temperatures
Sold In Pairs
From $27.65
303 Touchless Sealant
The 303 Touchless Sealant is designed to be an effective alternative to waxing your vehicle. Designed to be effective in both salt and freshwater environments. The Si02 has been modified to be more like a liquefied glass with a hydrophobic component to aid in water repellency and durability. This formula is both biodegradable and marine safe.
303 Touchless Sealant is designed to be effective on gel coat, fiberglass, metal, plastic, and clear vinyl surfaces as well as windshields and wheels.
Feature:
Made in USA
Salt/Freshwater Effective
Lasts up to 6 Months
Biodegradable & Marine safe
Application Instructions
After Washing your boat and while the surface is still WET and OUT of Direct Sunlight spray a small amount evenly across the surface
It is best to work ONE Section at a time using only a light mist of product.
Immediately rinse the section off. You will sees water beading on the surface meaning it is now protected
Repeat this process across the entirety of the boat and then dry thoroughly with a waffle weave drying or microfiber towel.
Product Application Tips
Rinse the product off each section thoroughly immediately after applying product
Do NOT let dry on the surface as this may cause water spots
If too much product is used and not rinsed off thoroughly this could also lead to water spots and streaks
If water spots do occur, rinse the area and dry again
From $37.69
3M Marine Grade Clear Silicone Sealant
This high quality silicone sealant is a one-component cure, sealant engineered to withstand the harsh marine environment. This weather-resistant sealant is formulated to resist mildew and form a non-yellowing seal for above waterline applications. In addition, this marine sealant is high-temperature resistant and remains flexible even after years of exposure. The non-shrinking and non-sagging properties of this product offer simple and efficient application.
High quality silicone sealant
For above the waterline interior/exterior sealing
Adheres to bare and painted metal, fiberglass, glass, non-oily woods, many plastics and abraded rubber
Excellent discoloration resistance
Mildew-resistant
Moisture-curing
Specifications;
Color: Clear
Full Cure: 24-48 Hours
Tack Free Time: 20 Minutes
Tensile Strength (imperial): 220 psi
Application Method: Hand or pressure caulk
Application Temperature: 40°-100°F
$58.79
3M 4200 Polyurethane Fast Cure Adhesive-Sealant 10oz White
3M Fast Cure Marine Sealant is a one-component, medium-strength, moisture-curing, gap-filling polyurethane that delivers strong flexible bonds to aluminum, wood, gelcoat, and fiberglass. It forms a watertight, weather-resistant seal above and below the waterline. It's flexibility allows for dissipation of stress caused by shock, vibration, swelling, or shrinking. This sealant is recommended for the following applications: fiberglass deck to hull, wood to fiberglass, portholes, deck fittings, rubrail attachment, sealing screwholes, and stanchion supports.
Features:
Medium strength marine bonding allows for disassembly
Formulated for fast cure, providing rapid results
Tack-free in 1 hour and typically cures in 24 hours
Above and below the water line applications
Flexible and durable adhesion withstand stress
Bonds to aluminum, wood, gelcoat and fiberglass
Color is white.
Caulking gun tube.
Click to Download 3M 4200 Marine Sealant Application Instructions
Frequently Asked Questions
- What is 3M 4200 Polyurethane Fast Cure Adhesive-Sealant 10oz White used for? 3M 4200 Polyurethane Fast Cure Adhesive-Sealant is a one-component, medium-strength marine sealant designed to create flexible, watertight bonds and seals. It can be used above and below the waterline for applications such as fiberglass deck-to-hull joints, wood-to-fiberglass bonding, portholes, deck fittings, rubrail attachment, screwholes, and stanchion supports.
- What materials does 3M 4200 Fast Cure Marine Sealant bond to? This polyurethane adhesive-sealant is formulated to bond to aluminum, wood, gelcoat, and fiberglass. Its flexible bond helps accommodate stress associated with shock, vibration, swelling, or shrinking while maintaining adhesion.
- Can 3M 4200 Fast Cure Marine Sealant be used above and below the waterline? Yes. 3M 4200 Fast Cure Marine Sealant is designed for watertight, weather-resistant sealing applications both above and below the waterline. The product description specifically lists marine applications including deck-to-hull joints, portholes, deck fittings, rubrails, screwholes, and stanchion supports.
- How quickly does 3M 4200 Fast Cure Marine Sealant cure? 3M 4200 Fast Cure Marine Sealant is formulated for a faster cure than a standard marine sealant. It becomes tack-free in approximately 1 hour and typically cures in 24 hours.
- Is 3M 4200 Fast Cure Marine Sealant a permanent adhesive? 3M 4200 Fast Cure Marine Sealant provides a medium-strength marine bond that allows for disassembly. Its flexible polyurethane formulation is designed to provide durable adhesion while accommodating stress from shock, vibration, swelling, or shrinking.
- How is 3M 4200 Fast Cure Marine Sealant packaged? This white 3M 4200 Fast Cure Marine Sealant comes in a 10-ounce caulking gun tube. The tube format is intended for application with a caulking gun.
From $41.19
3M 5200 Polyurethane Fast Cure Adhesive-Sealant
3M 5200 Polyurethane Fast Cure Adhesive Sealant is a one-component sealant designed to meet the high demands of the marine environment. 5200 Fast Cure provides strong watertight bonds and has permanent adhesion to wood, gelcoat, and fiberglass. 3M designed this sealant to be flexible, it allows for structural movement and dissipation of stress that may be caused by vibration, swelling, shrinking or shock.
5200 Fast Cure Sealant creates tough bonds above or below the waterline and is ideal for the following applications: fiberglass deck to hull, through hull fittings, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under moldings, hull seams above and below water line, and deck housing.
Faster curing version of 3M 5200.
Extremely strong and retains its strength above or below the waterline.
Stays flexible.
Watertight bonding/sealing of fiberglass, gelcoat and wood.
Best when NO Removal is anticipated.
Color is white.
Specifications:
Adhesive Type: Polyurethane
Application: Hand or pressure caulk
Tack-free Time: 1 Hour
3M 5200 Polyurethane Fast Cure Adhesive Sealant Application Information:
- Clean all surfaces before application. It is recommended to use an adhesive cleaner.
Cut the nozzle to desired bead size.
Puncture seal inside the threaded nozzle end and screw on nozzle.
Apply 3M 5200 Fast Cure to the seam or part to be bonded. Tool material to desired appearance.
Remove excess material with adhesive cleaner.
Frequently Asked Questions
- What is 3M 5200 Polyurethane Fast Cure Adhesive-Sealant used for? 3M 5200 Polyurethane Fast Cure Adhesive-Sealant is a one-component marine sealant designed to create strong, watertight bonds above or below the waterline. It can be used for applications such as fiberglass deck-to-hull joints, through-hull fittings, wood-to-fiberglass bonding, portholes, deck fittings, hull seams, and deck housings.
- What materials can 3M 5200 Fast Cure bond and seal? 3M 5200 Fast Cure provides permanent adhesion to wood, gelcoat, and fiberglass. It is formulated to remain flexible, allowing the bonded materials to accommodate movement and stress caused by vibration, swelling, shrinking, or shock while maintaining a watertight seal.
- Can 3M 5200 Fast Cure be used above and below the waterline? Yes. 3M 5200 Fast Cure is designed for strong, watertight bonding and sealing both above and below the waterline. The product description specifically lists applications including hull seams, through-hull fittings, and other marine components in these areas.
- Is 3M 5200 Fast Cure intended for applications where removal may be needed? 3M 5200 Fast Cure is best suited for applications where no removal is anticipated. It forms a permanent bond and is designed to retain its strength while remaining flexible in the marine environment.
- How should 3M 5200 Fast Cure Adhesive-Sealant be applied? Clean all surfaces before application, with an adhesive cleaner recommended. Cut the nozzle to the desired bead size, puncture the seal inside the threaded nozzle end, and attach the nozzle. Apply the sealant to the seam or parts being bonded and tool it to the desired appearance. Remove excess material with adhesive cleaner.
- How quickly does 3M 5200 Fast Cure become tack-free? 3M 5200 Polyurethane Fast Cure Adhesive-Sealant has a listed tack-free time of approximately 1 hour. The sealant is a one-component polyurethane product and can be applied by hand or with a pressure caulk application method.
From $33.89
3M Marine Adhesive Sealant 5200
3M's 5200 Adhesive Sealant is a one-part polyurethane used for permanent bonding. 5200 offers permanent adhesion to wood, gelcoat, and fiberglass, and forms watertight seals. Designed for the marine industry, this sealant forms bonds that are resistant to saltwater and weathering. This sealant is flexible, allowing for structural movement and dissipation of stress that may be caused by vibration, swelling, shrinking or shock. 3M 5200 achieves handling strength in 48 hours and has been trusted throughout the marine industry for over 50 years.
3M 5200 Adhesive Sealant is recommended for the following applications; fiberglass deck to hull, through hull fittings, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under moldings, hull seams above and below water line, and deck housing.
Features:
High performance, one-part polyurethane.
Extremely strong and retains its strength above or below the waterline.
Stays flexible.
Watertight bonding/sealing of fiberglass, gelcoat and wood.
Best when NO Removal is anticipated.
Specifications:
Adhesive Type: Polyurethane
Application Method: Hand or pressure caulk
Tack Free Time: 12 Hour, 48 Hour
Tensile Strength: 700 psi
3M 5200 Adhesive Sealant Application Information:
- Clean all surfaces before application. It is recommended to use an adhesive cleaner.
Cut the nozzle to desired bead size.
Puncture seal inside the threaded nozzle end and screw on nozzle.
Apply 3M 5200 to the seam or part to be bonded. Tool material to desired appearance.
Remove excess material with adhesive cleaner.
Frequently Asked Questions
- What is 3M Marine Adhesive Sealant 5200 used for? 3M Marine Adhesive Sealant 5200 is a one-part polyurethane designed for permanent bonding and watertight sealing of wood, gelcoat, and fiberglass. Recommended marine applications include fiberglass deck-to-hull joints, through-hull fittings, wood-to-fiberglass bonding, portholes, deck fittings, motors on fiberglass transoms, under moldings, hull seams, and deck housing.
- Can 3M 5200 Adhesive Sealant be used above and below the waterline? Yes. 3M 5200 Adhesive Sealant forms watertight bonds and retains its strength above or below the waterline. It is also resistant to saltwater and weathering, making it suitable for the marine applications specified in the product description.
- Is 3M 5200 Adhesive Sealant designed for permanent bonding? Yes. 3M 5200 is designed for permanent adhesion and is best suited for applications where removal is not anticipated. It provides strong bonds to wood, gelcoat, and fiberglass while remaining flexible to accommodate structural movement.
- How long does 3M Marine Adhesive Sealant 5200 take to reach handling strength? 3M 5200 Adhesive Sealant achieves handling strength in 48 hours. The listed specifications include a tack-free time of 12 hours and 48 hours.
- How do you apply 3M Marine Adhesive Sealant 5200? Clean all surfaces before application, using an adhesive cleaner as recommended. Cut the nozzle to the desired bead size, puncture the seal inside the threaded nozzle end, and attach the nozzle. Apply 3M 5200 to the seam or part, tool it to the desired appearance, and remove excess material with adhesive cleaner.
- What are the specifications of 3M 5200 Adhesive Sealant? 3M 5200 is a high-performance, one-part polyurethane adhesive sealant applied by hand or pressure caulk. It has a listed tensile strength of 700 psi and is formulated to remain flexible while providing watertight bonding and sealing of fiberglass, gelcoat, and wood.
Related collections
Adhesive currently published by All Marine World.
- Choosing a selection results in a full page refresh.
- Opens in a new window.