- All categories
Your cart
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Lighting
162 products
162 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$30.99
Sea Sense Marine Telescoping Flag Pole
The Sea Sense 3/4" diameter telescoping flag pole mounts into most two prong stern light bases. (Base and flag not included)
Features:
Ideal for dive, national, and nautical flags
Telescoping feature allows the pole to be raised for maximum visibility
Telescopes from 26" to 48" to fit most flags
Comes with flag attachments
Removable sure-fit collar
$17.39
Hawk Epoxy F5 Light Density Fairing Filler
The Sea Hawk Hawk Epoxy F5 Light Density Fairing Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Easy to sand and carve this fairing compound still remains strong and light weight.
Sea Hawk Hawk Epoxy F5 Light Density Fairing Filler compares to West System 407 Low Density Filler
Features:
Thickens to a reddish brown color
Easy to sand and carve
Remains strong and lightweight
Directions For Use:
Mix the Hawk Epoxy resin and catalyst
Mix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved
Depending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:
- If you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag
- For laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency
- To ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin/catalyst/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.
- For general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.
Click here to download Hawk Epoxy Application guide
$484.79
Sea Hawk Biocop TF Bottom Paint
Sea Hawk's Biocop TF Bottom Paint is a multi-season, self-polishing antifouling paint that provides maximum fouling protection. Bicop TF was developed as an alternative to tin-based antifouling paints to stand up to the harshest marine environments. The new Dual biocide technology and groundbreaking polymer binder system, PL3, produces a biocide that leaves no harmful effects on the environment. Safe for salt or fresh water on boats of all sizes, Biocop TF is a top performer among bottom paints.
Features:
Performs in fresh or saltwater
Multi-Season performance
Advanced dual-biocide PL3 release technology
Harder self polishing boosted ablative antifoulant for longer life
Approved for vessels of all sizes
Lloyd's Register certified
How to Apply Sea Hawk Biocop TF Bottom Paint
Sea Hawk Biocop TF Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using water. Biocop TF has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.
Finish: Semi-Gloss
Coverage: 320 Sq Ft
Application Method: Brush, Roller, Airless Sprayer
Maximum Roller Thickness: 3/8” Nap
Number of Coats: 2
Wet Film Thickness: 5.0 mils
Dry Film Thickness: 2.2 mils
Application Temp: 50° F Min/ 95° F Max
Thinner: If necessary, maximum 10% with Sea Hawk 2033, 2035
Surface Preparation and Application
Previously Painted Surfaces
Known Compatibility of existing antifoulant
Power wash to remove any loose paint or other contaminants.
Scuff sand with 80 grit sandpaper, remove all residue and let dry.
Apply minimum 2 coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.
Unknown Compatibility of existing antifoulant
Power wash to remove any loose paint or other contaminants.
Scuff sand with 80 grit sandpaper, remove all residue and let dry.
Apply 1 coat of 1277 Barrier coat primer or 1283 Island Primer
Apply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.
Poor condition of existing antifoulant
If previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.
Once stripped refer to the Bare Fiberglass Application Guidelines.
Bare Fiberglass
To prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush.
Using either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch & Cleaner scrub the surface and rinse thoroughly.
Sand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch & Cleaner
Once cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.
Apply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum
Sanding Method:
Sand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch & Cleaner
Apply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.
Non-Sanding Method:
Apply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour.
Apply minimum of two coats of Biocop TF. Allow 3-6 hours between coats and a minimum overnight dry.
Bare Wood
Clean the surface and ensure it is dry and free of contaminants.
Sand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper.
Apply two coats of Biocop TF. Apply first coat thinned 20% and let dry overnight.
Apply two more coats a…
$13.99
12 volt, 20 watt, 700 candle power halogen light bulb. Previously used on the Sea Dog dome lights 402190, 402195, 402200, 402202, 402205 and 402207. Halogen type #891.
From $28.99
Sea-Dog Light Tip Toggle Switch
Sea Dog Light Tipped Toggle Switch is constructed of stamped brass, injection molded nylon, and polycarbonate for excellent durability in marine environments. Toggle bat features a lighted tip which illuminates white in the off position and red in the on position. Fits panels up to 1/4" thick and requires 15/32" mounting hole. Rated 15 Amps at 12 Volts DC. The locking ring and lever seal increase water penetration resistance.
Product Features:
For use in the marine environment
Stamped Brass/Injection Molded Nylon, Polycarbonate
12 volt
15 AMP
Use for replacement or new installations
Lighted tip toggle switches light up white in the off position and red in the on position
Click here to download Sea Dog Light Tip Toggle Switch Installation Instructions
$216.49
Sea Dog LED Side Mount Docking Light- Pair
LED Side Mount Docking Lights have a sleek design and are super bright for excellent vision when docking. 3.4W and 180 Lm
Length:3-9/16”
Width:2-5/8”
Height:3/4”
$40.99
Sea Dog Halogen Flood Light
This Sea Dog marine grade flood light features a fiberglass reinforced injection-molded housing for strength and UV resistance. Also features a solid glass lens and a corrosion resistant stamped 304 stainless steel mounting bracket.
Amps: 4.58 A
Volts: 12 V
Watts: 55 W
Dimensions:
- 5 7/8" W x 5 5/16" H x 3 3/16" D
From $50.99
Sea Dog LED Dome Light 6"
LED Dome Lights have very low current consumption at .068 amps at 12 volts and have extreme long life. LED Dome Lights give off very low heat and are resistant to vibration. LED Dome Lights have 18 white LED’s per light.
$99.99
Sea Dog LED Low Profile Task Light
Stainless Steel
Dimensions:
OD: 3 3/8"
Lens Diameter: 2 5/8"
9/32" Deep
From $14.99
Sea Dog Marine LED Utility Light
Light up your deck or cabin with this compact Sea Dog LED utility light. Available in white or blue, it offers efficient illumination with low amp draw, making it ideal for onboard electrical systems. The injection-molded Delrin housing resists heat and deformation, while the surface-mount design installs easily with four #6 flathead screws. Choose from black or white finishes to match your setup. Built for harsh marine conditions, this light provides reliable courtesy lighting without draining your battery or cluttering your space.
Surface mount
Injection molded Delrin construction
12 VDC
Dimensions:
A: 2-3/16"
B: 1-3/4"
C: 1-9/16"
D: 11/16"
Frequently Asked Questions
- What is the Sea Dog Marine LED Utility Light used for? The Sea Dog Marine LED Utility Light is designed to provide illumination for boat decks or cabins. It is a compact surface-mount light available in white or blue and operates on a 12 VDC electrical system.
- How is the Sea Dog Marine LED Utility Light mounted? The Sea Dog Marine LED Utility Light uses a surface-mount design and installs with four #6 flathead screws. This mounting configuration provides a compact installation for onboard lighting applications.
- What is the Sea Dog Marine LED Utility Light made of? The Sea Dog Marine LED Utility Light features an injection-molded Delrin housing. The product description states that the Delrin construction resists heat and deformation and is designed for marine conditions.
- What voltage does the Sea Dog Marine LED Utility Light use? The Sea Dog Marine LED Utility Light operates on 12 VDC, making it designed for onboard electrical systems using that voltage.
- What colors are available for the Sea Dog Marine LED Utility Light? The Sea Dog Marine LED Utility Light is available with either white or blue illumination. The housing is available in black or white finishes to suit different onboard setups.
- What are the dimensions of the Sea Dog Marine LED Utility Light? The Sea Dog Marine LED Utility Light has the following listed dimensions: A is 2-3/16 inches, B is 1-3/4 inches, C is 1-9/16 inches, and D is 11/16 inch.
$73.49
Sea Dog LED Cabin/Reading Light
This Sea Dog LED Cabin/Reading Light will provide exceptional satisfaction for any buyer. With an adjustable light angle and plastic silver finish, this cabin/reading light offers extreme flexibility and can be used anywhere in the cabin. Featuring a G4 LED warm white 2W Bulb, 150 Lumens, this light is a top choice among many.
Features:
G4 LED Bulb 2W (Warm White)
Adjustable Light Angle
#6 FH Fasteners
Plastic, Silver Finish
Specifications:
150 Lumens
10-30 Volts
$91.99
Sea Dog Brass Boat Berth Light
Sea Dog Brass Boat Berth Light are interior lights that look good in any boat. Made of solid stamped brass and coated in lacquer to prevent it from tarnishing. The interior is painted with white enamel to help reflect more light. Runs on 12 Volts DC and uses a ,included, 15 watt double contact bayonet style bulb. Pre-wred with on/off switch and is able to be converted to LED with an adapter (sold separately). Installs with three #6 RH fasteners (not included).
Product Features:
Solid Stamped Brass
White Enamel Interior
12 Volt DC
15 Watt Double contact bayonet style bulb
Pre-wired on/off switch
$96.49
Sea Dog LED Stainless Steel Day - Night 12 Volt Dome Light
Sea Dog LED Day/Night Dome Lights have very low current consumption at .068 amps at 12 volts and have an extremely long life. These lights give off very low heat and are resistant to vibration. Each contains 5 Red and 15 White LED's per light and are the equivalent to a 15 watt incandescent bulb. Measures 6-3/4" in diameter.
Constructed of corrosion resistant stamped 304 stainless steel. Surface mounts with three #6 RH fasteners (not included).
Frequently Asked Questions
- What is the Sea Dog LED Stainless Steel Day - Night 12 Volt Dome Light used for? The Sea Dog LED Stainless Steel Day - Night 12 Volt Dome Light provides both red and white illumination for marine applications. Each light contains 5 red and 15 white LEDs, offering the equivalent of a 15-watt incandescent bulb while using only 0.068 amps at 12 volts.
- What type of LEDs are included in the Sea Dog Day - Night Dome Light? Each Sea Dog LED Day - Night Dome Light contains 5 red LEDs and 15 white LEDs. The LEDs have extremely long life, produce very low heat, and are resistant to vibration.
- What is the Sea Dog LED Dome Light made from? The Sea Dog LED Stainless Steel Day - Night Dome Light is constructed from corrosion-resistant stamped 304 stainless steel and is designed for surface mounting.
- How much power does the Sea Dog LED Day - Night Dome Light use? The light operates on a 12-volt system and has a current consumption of 0.068 amps at 12 volts. It is designed to provide the equivalent of a 15-watt incandescent bulb while producing very low heat.
- How is the Sea Dog LED Stainless Steel Day - Night Dome Light mounted? The light measures 6-3/4 inches in diameter and surface mounts with three #6 round-head fasteners. The required fasteners are not included with the light.
From $48.99
Sea Dog Stainless Steel Dome Light With Switch
This Sea Dog Stainless Steel Dome Light is a great addition to any marine vessel. It is constructed of corrosion-resistant stamped 304 stainless steel and is supplied with a 18.4 watt DC double contact bayonet bulb. This dome light is prewired with an on/off toggle switch for ease of use. Installation is easy, this light surface mounts with three RH fasteners (not included).
Features:
Stamped 304 stainless steel construction
18.4 Watt DC double contact bayonet bulb
Includes on/off toggle switch
Installs with three RH fasteners (not included)
12 VDC
$86.19
Perko Stainless Steel Round Bi-Color Boat Navigation Light
This Perko Stainless Steel Round Bi-Color Boat Navigation Light is composed of a stainless steel top and a black polymer base. Designed for maximum durability and long lasting use, it features starboard (green) and port (red) lenses. Certified for use on sail and power driven vessels under 12 meters (39.4 ft.) in length, this boat navigation light will make a great addition to your boat.
Features:
Certified For Use On Sail and Power Driven Vessels Under 12 Meters (39.4 ft.) In Length
Black Polymer Base
Starboard (Green) and Port (Red) Lenses
Stainless Steel Top
Uses #4 Screws
Specifications:
Voltage: 12 Volt
Base O.D.: 2-3/8"
Product Notes:
- Product meets USCG requirements for 12 volt applications. It can also be used as a 24 volt ABYC A-16 certified light on boats built prior to 11/01/2003. To use as a 24 volt light while maintaining A-16 certification, replace the included bulb with a 24 volt bulb.
- Click here to download Perko Stainless Steel Round Bi-Color Boat Navigation Light Installation Instructions
- Frequently Asked Questions
- What is the Perko Stainless Steel Round Bi-Color Boat Navigation Light designed for? The Perko Stainless Steel Round Bi-Color Boat Navigation Light is designed for sail and power driven vessels under 12 meters (39.4 feet) in length. It features starboard green and port red lenses for bi-color navigation lighting.
- What materials are used in the Perko Stainless Steel Round Bi-Color Boat Navigation Light? This Perko boat navigation light features a stainless steel top and black polymer base. It is designed for durability and long-lasting use.
- What voltage does the Perko Stainless Steel Round Bi-Color Boat Navigation Light use? The Perko Stainless Steel Round Bi-Color Boat Navigation Light is rated for 12 Volt applications and meets USCG requirements for 12 Volt use. It can also be used as a 24 Volt ABYC A-16 certified light on boats built prior to November 1, 2003, when fitted with a 24 Volt bulb.
- What are the dimensions of the Perko Round Bi-Color Boat Navigation Light? The Perko Stainless Steel Round Bi-Color Boat Navigation Light has a base outside diameter of 2-3/8 inches and uses #4 screws.
- What colors are the lenses on the Perko Round Bi-Color Boat Navigation Light? The Perko Stainless Steel Round Bi-Color Boat Navigation Light has a starboard green lens and a port red lens, providing both colors in one navigation light.
$86.99
Perko Horizontal Mount Stern Light
Horizontal Mount Stern Light features a polished stainless steel top and a durable black polymer base, designed for reliable stern illumination on marine vessels. USCG 2-mile certification ensures compliance for navigation requirements. It includes a 12-volt, 10-watt bulb for ready-to-use installation.
Key Features
USCG 2-mile (2nm) certified stern light
Polished stainless steel top
Durable black polymer base
Horizontal mount design
Includes 12V bulb
Marine-grade construction
Specifications
Voltage: 12 Volt
Wattage: 10 watts
Amperage: 0.80 amps
Base outside diameter: 2-3/8"
Height: 1-5/8"
Screw size: #4
$86.99
Perko Stainless Steel Masthead Boat Navigation Light
This Perko Stainless Steel Masthead Boat Navigation Light features a stainless steel top with a polymer base and horizontal mount. It is designed for long lasting use and extreme durability. With a light visibility of two miles, it is convenient and offers great satisfaction. This boat navigation light is certified for replacement use only on sail or power driven vessels under 12 meters (39.4 ft.) in length.
Features:
Horizontal Mount
Polymer Base
Stainless Steel Top
Certified For Replacement Use Only On Sail Or Power Driven Vessels Under 12 Meters (39.4 ft.) In Length
Uses #4 Screws
Specifications:
Voltage: 12 Volt
Base O.D. 2-3/8"
Visibility: 2-Mile
Product Notes:
- This Masthead Navigation Light can only be used as a 12 volt A-16 replacement light on vessels built before 11/01/2013. To use as 24 volt lights while maintaining A-16 certification, replace the included bulbs with 24 volt bulbs.
- Click here to download Perko Stainless Steel Masthead Boat Navigation Light Installation Instructions
- Frequently Asked Questions
- What is the Perko Stainless Steel Masthead Boat Navigation Light designed for? The Perko Stainless Steel Masthead Boat Navigation Light is certified for replacement use on sail or power driven vessels under 12 meters (39.4 feet) in length. It features a horizontal mount, stainless steel top, and polymer base.
- What voltage does the Perko Stainless Steel Masthead Boat Navigation Light use? The Perko Stainless Steel Masthead Boat Navigation Light is rated for 12 Volt applications. It can be used as a 12 Volt A-16 replacement light on vessels built before November 1, 2013.
- What is the visibility range of the Perko Stainless Steel Masthead Boat Navigation Light? The Perko Stainless Steel Masthead Boat Navigation Light provides a listed visibility range of 2 miles.
- What are the mounting specifications for the Perko Stainless Steel Masthead Boat Navigation Light? The Perko Stainless Steel Masthead Boat Navigation Light features a horizontal mount, a 2-3/8-inch base outside diameter, and uses #4 screws.
- Can the Perko Stainless Steel Masthead Boat Navigation Light be used as a 24 Volt light? To use the Perko Stainless Steel Masthead Boat Navigation Light as a 24 Volt light while maintaining A-16 certification, replace the included bulbs with 24 Volt bulbs. The product is specified as a replacement light for vessels built before November 1, 2013.
$95.19
Perko Stainless Steel Boat Stern Light w/ Vertical Mount
This Perko Boat Stern Light w/ Vertical Mount is composed of stainless steel plating that keeps the electronics safe from harsh marine environments. It uses #8 screws and provides exceptional use and long lasting durability. With a black plastic base and a vertical flush mount, this boat stern light is for use on sail or power driven vessels 65.6 ft in length or less.
Features:
For Use On Sail Or Power Driven Vessels 65.6 ft In Length Or Less
Stainless Steel Plating Keeps The Electronics Safe From Marine Environments
Vertical Flush Mount
Uses #8 Screws
Black Plastic Base
Specifications:
Depth: 1"
O.D. 3"
12 Volt
Click here to download Perko SS Vertical Mount Navigation Stern Light Instructions
Frequently Asked Questions
- What is the Perko Stainless Steel Boat Stern Light with Vertical Mount designed for? The Perko Stainless Steel Boat Stern Light with Vertical Mount is designed for sail or power-driven vessels 65.6 feet in length or less. It features a vertical flush-mount design with a stainless steel-plated construction and black plastic base.
- How is the Perko Stainless Steel Boat Stern Light mounted? This Perko boat stern light uses a vertical flush-mount configuration and is secured with #8 screws. The light has a black plastic base as part of its mounting construction.
- What is the Perko Boat Stern Light made of? The Perko Boat Stern Light features stainless steel plating designed to protect the electronics from marine environments. It also has a black plastic base.
- What voltage does the Perko Stainless Steel Boat Stern Light use? The Perko Stainless Steel Boat Stern Light is designed for 12-volt electrical systems.
- What are the dimensions of the Perko Stainless Steel Boat Stern Light? The Perko Stainless Steel Boat Stern Light has a listed depth of 1 inch and an outside diameter of 3 inches. It uses a vertical flush-mount design.
$197.99
Perko Stainless Steel Boat Stern Light
This Perko Stainless Steel Boat Stern Light is certified for replacement use only on all boats under 65.6 ft. (20 meters). Perfect for any boat, it features a flush mount and a black polymer base. The stainless steel top is built to last and will provide maximum durability and exceptional satisfaction. With an included 12 Volt bulb, this boat stern light is a top choice among many.
Features:
Certified For Replacement Use Only On All Boats Under 65.6 ft. (20 Meters)
Black Polymer Base
Stainless Steel Top
Flush Mount
Specifications:
Screw Size: #8
Amperage: .74 Amps
Voltage: 12 Volt (Bulb Included)
Wattage: 10 Watts
Width: 5-3/16"
Height: 3-3/8"
Depth: 1-1/2"
Click here to download Perko Stainless Steel Boat Stern Light Installation Instructions
Frequently Asked Questions
- What is the Perko Stainless Steel Boat Stern Light used for? The Perko Stainless Steel Boat Stern Light is certified for replacement use only on boats under 65.6 feet (20 meters). It features a flush-mount design with a stainless steel top and black polymer base.
- What voltage and bulb does the Perko Stainless Steel Boat Stern Light use? The Perko Stainless Steel Boat Stern Light operates at 12 volts and includes a 10-watt bulb. The light has a listed current draw of 0.74 amps.
- What materials are used to construct the Perko Boat Stern Light? The Perko Boat Stern Light features a stainless steel top and black polymer base. The stainless steel construction provides a durable housing for the flush-mounted stern light.
- How is the Perko Stainless Steel Boat Stern Light mounted? The Perko Stainless Steel Boat Stern Light uses a flush-mount design and requires #8 screws for installation. The light measures 5-3/16 inches wide, 3-3/8 inches high, and 1-1/2 inches deep.
- What boat size is the Perko Stainless Steel Boat Stern Light certified for? This Perko stern light is certified for replacement use only on boats under 65.6 feet (20 meters). Verify that the light is appropriate for your boat and replacement application before installation.
$199.09
Perko Stainless Steel Boat Navigation Side Lights
These Perko Stainless Steel Boat Navigation Side Lights feature gold plated contacts and a stainless steel top. Built with a polymer base, they are designed to be extremely durable and long lasting. Sold in pairs, they come with one starboard (green) and one port (red) light. With light visibility of 1 mile, these boat side lights are certified for replacement use only on all boats under 65.6 ft. (20 meters) in length.
Features:
Red and Green Lenses
Stainless Steel Top
Gold Plated Contacts
Black Polymer Base
Certified For Replacement Use Only On All Boats Under 65.6 ft. (20 Meters)
Comes With One Starboard (Green) and One Port (Red) Light
Sold In Pairs
Specifications:
Length: 4-1/4"
Width: 2-3/8"
Screw Size: #4
Voltage: 12 Volt (Bulb Included)
Wattage: 10 Watts (Each Light)
Amperage: .80 Amps (Each Light)
Projection: 1-9/16"
Visibility: 1 Mile (USCG 2nm) Certified
Click here to download Perko Stainless Steel Boat Side Navigation Lights Installation Instructions
Frequently Asked Questions
- What are the Perko Stainless Steel Boat Navigation Side Lights designed for? The Perko Stainless Steel Boat Navigation Side Lights are certified for replacement use only on boats under 65.6 feet (20 meters) in length. The pair includes one Starboard green light and one Port red light for boat navigation.
- What is included with the Perko Stainless Steel Boat Navigation Side Lights? The Perko Stainless Steel Boat Navigation Side Lights are sold as a pair and include one Starboard green light and one Port red light. Each light includes a bulb and features a stainless steel top, black polymer base, and gold plated contacts.
- What are the electrical specifications for the Perko Stainless Steel Boat Navigation Side Lights? Each Perko boat side light operates at 12 volts, uses a 10-watt bulb, and draws 0.80 amps. The bulbs are included with the lights.
- What are the dimensions of the Perko Stainless Steel Boat Navigation Side Lights? Each Perko Stainless Steel Boat Navigation Side Light measures 4-1/4 inches long, 2-3/8 inches wide, and has a projection of 1-9/16 inches. The lights use #4 screws.
- What is the visibility range of the Perko Stainless Steel Boat Navigation Side Lights? The Perko Stainless Steel Boat Navigation Side Lights have a listed visibility of 1 mile and are identified as USCG 2 nautical mile certified. The lights feature red and green lenses for Starboard and Port navigation positions.
$129.99
Perko Stainless Steel Bi-Color Boat Navigation Light
This Perko Stainless Steel Bi-Color Boat Navigation Light features two lenses, one starboard (green) and one port (red). It is certified for replacement use only on sail or power driven vessels under 12 meters (39.4 ft.) in length. It is constructed with a black plastic base and a stainless steel top. It provides up to 1 mile of light visibility.
Features:
Comes With Two Lenses, One Starboard (Green) and One Port (Red)
Stainless Steel Top
Certified For Replacement Use Only On Sail Or Power Driven Vessels Under 12 Meters (39.4 ft.) In Length
Black Plastic Base
Specifications:
Voltage: 12 Volt
Screw Size: #4
Visibility: 1 Mile
Length: 4-1/2"
Width: 2-1/8"
Click here to download Perko Stainless Steel Bi-Color Boat Navigation Light Installation Instructions
$101.49
Perko 4.5" Fixed Mount All-Round Boat Navigation Light
This Perko 4.5" Fixed Mount All-Round Boat Navigation Light is certified for use on power driven vessels up to 65.6 ft. in length. It is designed for extreme durability against harsh marine environments and offers added protection from corrosion. With a clear fresnel globe, this boat navigation light offers exceptional visibility.
Features:
Black Polymer Base
Corrosion Resistant
Certified For Use On Power Driven Vessels Up To 65.6 ft. In Length
Clear Fresnel Globe
Protects From Harsh Marine Environments
Fixed Mount
Specifications:
Screw Size: #8
Size #2 Pole: 3/4 Diameter Anodized
Bulb: 12 Volt (Included)
O.D. Base: 2-1/8"
Click here to download Perko 4.5" Fixed Mount All-Round Boat Navigation Light Installation Instructions
$30.99
Vertical mount side light lens set, 1 red and 1 green. Replacement lens for Perko 972DP0CHR or 901DP0CHR.
$30.99
Pair of spare clear lenses. For 1125, 1123, 1124, 1183, 1196, 1197 model lights
Showing 24/162
Related collections
Lighting currently published by All Marine World.
- Choosing a selection results in a full page refresh.
- Opens in a new window.