Interlux Paint Toplac Plus Marine Paint

Interlux Toplac Plus Marine Paint

Interlux Toplac Plus delivers a hard, high-gloss polyurethane finish designed for topside applications above the waterline. This one-part marine paint features superior flow and leveling characteristics that produce smooth roller finishes without tipping. Apply it to hulls, decks, cabins, and trim using brush, roller, or spray methods. With coverage of 587 square feet per gallon, you'll need 2-3 coats for optimal protection. The formula works with single-part primers, enamels, and polyurethanes while offering excellent UV resistance. Available in bright, crisp colors that maintain their appearance in harsh marine environments.

Product Features:

Hard, high gloss, one-part polyurethane finish

Excellent flow and leveling characteristics

Smooth Roller Finish with no Tipping required

Topside paint - Recommended for use above true waterline

For use with single-part primers, enamels, or polyurethanes

Available in a range of bright, crisp colors

Specifications:

Finish: High Gloss

Application Method: Brush, roller or spray

Number of Coats: 2 Minimum (only 1 may be needed for touch-up/repair)

Coverage: 587 sq. ft/gal per coat

Associated Products:

Thinner/Cleaner

2333N Reducing Solvent

333 Brushing Thinner

216 Special Thinner

How To Apply Toplac Plus

Application Method:  Brush, Roller, Spray

Number of Coats: 2-3

Dry Film Thickness per Coat: 1-1.5 mils (2-3 wet mils)

Coverage: 587 sq. ft/gal.

Application Temp: 41°F Min. / 95°F Max.

Thinning: Add 10% 2333N reducing solvent for brushes and 216 Special Thinner for spray

Cleaner: 333 Brushing Liquid

DRY TIMES:

Temp

Touch Dry

Overcoating Substrate

95°F

1 Hour

6 Hour Min / 24 Hour Max

77°F

2 Hours

8 Hour Min / 2 Day Max

59°F

3 Hours

16 Hour Min / 3 Day Max

41°F

6 Hours

24 Hour Min / 4 Day Max

Note: Avoid applying late in the evening as condensation can cause a loss of gloss during overnight cure. Do not use in temperatures below 41° F

Surface Preparation & Application

Previously Painted Surface:

In poor condition remove all previous coatings and prime the substrate, referring to the primer/undercoat technical datasheet for further preparation instructions.

In good condition wash down with a suitable detergent, rinse with fresh water and allow to dry

Abrade with 280 - 320 grit paper and remove sanding residue

Wipe with Brushing LIquid 333 and allow to dry completely.

All Substrates:

Prime with a suitable primer or primer/undercoat

Application Methods:

Sand the undercoat smooth with 120 - 400 grit wet or dry paper

Remove dust with a dust wipe

Apply 2-3 coats of Toplac Plus with 8-16 hours depending on ambient temperature (refer to the table above)

Ambient temperatures should be between 41° F and 95° F

Do not exceed 10% thinner by volume

Click here for Interlux Toplac Plus Topside Boat Paint Application Information

Frequently Asked Questions

• What is Toplac Plus used for, and where on the boat can it be applied? Toplac Plus is a topside paint for use above the waterline. It's suitable for hulls, decks, cabins, and trim. It's not an antifouling paint and should not be used below the waterline.
• Do I need to thin Toplac Plus, and which thinner should I use? Thinning depends on your application method. For brush or roller application, add up to 10% of Interlux 2333N Reducing Solvent. For spray application, use Interlux 216 Special Thinner instead. Do not exceed 10% thinner by volume regardless of method. For cleanup, use Interlux 333 Brushing Liquid.
• Does this paint require tipping after rolling, or will it self-level? One of Toplac Plus's key advantages is that it doesn't require tipping. Its flow and leveling characteristics produce a smooth finish straight off the roller, which is a me…