Tuff-Coat Marine Tuff Coat Rubberized Non-Skid Submersible Deck Coating

Tuff Coat Rubberized Non-Skid Marine Submersible Deck Coating - Gallon

Tuff Coat Rubberized Non-Skid Coating is a single component, flexible, water-based non-skid coating designed to create a long-lasting, slip-resistant surface in wet or dry environments. This updated formulation is created through a unique process of cross-linking urethanes, acrylics, co-polymers, and recycled rubber granules to produce an attractive, durable, impact-resistant finish.

Ideal for boats, docks, ramps, deck surfaces, splash pads, kiddie pools, wave pools, spray parks, restroom floors, natatoriums, and other areas requiring added slip resistance, Tuff Coat provides a flexible non-slip surface that can be used in or out of water. Once applied, the finish dries to approximately 30-35 mils thick, helping hide surface imperfections while improving existing non-skid finishes for added safety.

This low-odor, one-part coating is exceptionally easy to apply and cleans up with soap and water. For best results, apply using a Tuff Coat roller or low-pressure hopper spray gun. Tuff Coat is chemical and UV resistant, highly durable, impact resistant, and made with recycled rubber granules for a comfortable, non-abrasive textured finish.

Features & Benefits:

Single component, flexible, water-based non-skid coating

Created by cross-linking urethanes, acrylics, co-polymers, and recycled rubber granules

Provides a durable, impact-resistant, non-slip surface

Designed for use in wet or dry environments

Ideal for boats, docks, ramps, deck surfaces, splash pads, kiddie pools, wave pools, spray parks, restroom floors, natatoriums, and more

Flexible finish dries to approximately 30-35 mils thick

Helps hide significant surface imperfections

Improves existing non-skid finishes for added safety

Exceptionally easy one-part application

Low odor formula

Soap and water clean-up

Chemical and UV resistant

Highly durable and impact resistant

Helps prevent slipping and injury

Deadens and absorbs noise

Made with recycled rubber granules for a non-abrasive texture

NOTE: Due to the nature of the rubberized granules, the paint texture may vary when applied

Can be applied with a Tuff Coat roller or low-pressure hopper spray gun

Dries to a quick, easy-to-clean finish

Water-Based & Eco Friendly

Recycled High-Grip Rubber Granules

UV & Chemical Resistant

Single Component - No Mixing

Simple Do-it-Yourself Application

Application Specs:

Temp: 40°F min. - 120°F max. air, surface, and material

Relative Humidity: 85% maximum

Method: Tuff Coat roller or low-pressure hopper spray gun

Finish: Matte textured finish

Appearance: Textured colored liquid

Recommended dry film thickness: Approximately 30-35 mils

Coverage: Approximately 40-45 sq. ft. per gallon in 2 coats

Clean-up: Soap and water

Drying Schedule at 50% RH, 72ºF

To touch: Approx. 1 hour

To top coat: Approx. 1-2 hours

To cure: Approx. 24 hours-5 days for a full chemical cure

Application Method: Roller or low-pressure hopper spray gun

Application Temperature: 40°F or higher

Coats: 2 coats for light traffic | 3 coats for heavy traffic

How to Apply Tuff Coat Rubberized Deck Coating

Prior to applying Tuff Coat, stir thoroughly before use and stir periodically during application to maintain the rubber granules in suspension. Dilute the product with clean water only if needed. A 10% dilution will reduce the solids within the product by the same amount. To avoid cracking, do not allow Tuff Coat Rubberized Deck Coating to pool and do not apply excessively thick coats.

Note: It is recommended that you perform a test patch to ensure adhesion before applying fully.

Surface Preparation

Concrete

Must be fully cured.

If a concrete surface has a porous texture, no further surface preparation is necessary.

If the concrete surface is not porous, acid etching, sanding, or shot blasting is necessary. Mak…