Starbrite Aqua Clean Gallon

Starbrite Aqua Clean Fresh Water Treatment

Aqua Clean is a water conditioner that cleans and deodorizes fresh water holding tanks and supply systems to keep water fresh. Excellent for after storage or winterization to flush out algae, bacteria, scale and sediment or use periodically to prevent foul taste and odors. One gallon of Aqua Clean treats 100 gallons of water.

How to Use Starbrite Aqua Clean Fresh Water Treatment:

Remove all water from tank and system by turning on water pump, opening tank drain valves and opening all faucets and shower heads.

After system has fully drained, turn off water pump, close all valves and faucets and shower heads.

Add fresh water to tank to fill it approximately 1/2 full.

Add appropriate amount of Aqua Water Tank & System Flush required for full tank capacity (1 gallon for each 100 gallons of tank capacity).

Add fresh water until tank is full.

Move boat or RV several times in order to disperse Water Tank & System Flush throughout water.

Turn on water pump and open all faucets and shower heads, keeping them open and flowing for about 3 minutes.

Close all faucets and shower heads and turn off water pump.

Allow the treated water to remain in the system for approximately 30 minutes, then turn on the water pump and open all fixtures, allowing them to flow freely for about 3 minutes before closing them and turning off the water pump.

Open the tank drain valves to completely drain the tank, which will now be clean and deodorized.

Close the valve and fill the tank with fresh water.

Turn on water pump and open all water fixtures to allow water to flow freely for a few minutes to remove Water Tank & System Flush from water lines. To prevent water from picking up taste or smell from tank walls or pipes, use Aqua Water System Conditioner. To maintain water quality, treat it with Aqua Water Treatment & Freshener every time you add water to the tank.

Frequently Asked Questions

• What is Starbrite Aqua Clean Fresh Water Treatment used for? Starbrite Aqua Clean Fresh Water Treatment is a water conditioner that cleans and deodorizes fresh water holding tanks and supply systems. It can be used after storage or winterization to flush out algae, bacteria, scale, and sediment, or periodically to help prevent foul tastes and odors.
• How much Starbrite Aqua Clean Fresh Water Treatment is needed for a water tank? One gallon of Starbrite Aqua Clean Fresh Water Treatment treats 100 gallons of water. The directions specify adding the appropriate amount based on the full capacity of the tank, using 1 gallon for each 100 gallons of tank capacity.
• How do you use Starbrite Aqua Clean Fresh Water Treatment to clean a water system? First drain the tank and water system completely, then refill the tank approximately halfway with fresh water and add the appropriate amount of treatment. Fill the tank, disperse the treatment, operate the water fixtures, allow the treated water to remain in the system for approximately 30 minutes, then drain and refill the system.
• Can Starbrite Aqua Clean Fresh Water Treatment be used after winterization or storage? Yes. Starbrite Aqua Clean Fresh Water Treatment is specified for use after storage or winterization to flush out algae, bacteria, scale, and sediment from fresh water holding tanks and supply systems. It can also be used periodically to help prevent foul taste and odors.
• How long should Starbrite Aqua Clean Fresh Water Treatment remain in the water system? After the treated water has been circulated through the tank and fixtures for approximately 3 minutes, the directions specify allowing the treated water to remain in the system for approximately 30 minutes. The system is then flushed again for about 3 minutes before the tank is completely drained.
• What should be done after using Starbrite Aqua Clean Fresh Water Treatment? After treatment, completely drain the tank, close th…