Sea Hawk Smart Solution Black GL EPA # 44891-19

Sea Hawk Smart Solution Bottom Paint Sea Hawk Smart Solution Bottom Paint is a metal-free antifouling paint that is engineered to be the most effective environmentally-friendly antifouling paint available. Smart Solution provides equivalent performance to traditional bottom paints, but utilizes metal-free biocides that result in no bioaccumulation in the environment. The coating's reaction to salt water creates a slick film that encapsulates the hull, providing enhanced speed and premium performance against growth. How does Smart Solution work? Smart Solution utilizes a pharmaceutical-grade biocide called ECONEA (Tralopyril) to control hard growth. Within days of application, the coating creates a living surface much like the mucoprotein protective slime coat that covers the scales and skin of a fish. This slime coat acts as a defense against bacterial, parasitic, and fungal pathogens. It protects the surface by preventing microorganisms from attaching when the boat is not in motion. Features: Environmentally-friendly, metal-free bottom paint Compatible over existing antifoulants Copper-Free Slick film increases speed when launched Increased speed Lloyd's Register Certified Specifications: Finish: Semi-gloss VOC: 328 grams/liter Coverage: 267 sq.ft./gal. Number of Coats: 3 Colors Available: 4705-Black Pack Size: 1 US Gallon How to Apply Sea Hawk Smart Solution Bottom Paint Sea Hawk Smart Solution Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using water. Smart Solution has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in. Finish: Semi-Gloss Coverage:  320 Sq Ft Application Method: Brush, Rolling, Airless Sprayer Maximum Roller Thickness: 3/8” Nap Number of Coats: 2 Wet Film Thickness: 5.0 mils Dry Film Thickness: 2.2 mils Application Temp: 50° F Min/ 95° F Max Thinner: Sea Hawk 2033 Paint Thinner or Xylene Drying Times   Substrate Temp   Touch Dry   Minimum Recoat   Minimum Launch   41°F   4 hours   12 hours   16 hours   73°F   2 hours   6 hours   12 hours   95°F   1 hour   4 hours   12 hours Surface Preparation and Application Systems Previously Painted Surfaces Known Compatibility of existing antifoulant Power wash to remove any loose paint or other contaminants. Scuff sand with 80 grit sandpaper, remove all residue and let dry. Apply minimum 2 coats of Smart Solution. Allow 3-6 hours between coats and a minimum overnight dry. Unknown Compatibility of existing antifoulant Power wash to remove any loose paint or other contaminants. Scuff sand with 80 grit sandpaper, remove all residue and let dry. Apply 1 coat of 1277 Barrier coat primer or 1283 Island Primer Apply minimum of two coats of Smart Solution. Allow 3-6 hours between coats and a minimum overnight dry. Poor condition of existing antifoulant If previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting. Once stripped refer to the Bare Fiberglass Application Guidelines. Bare Fiberglass To prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush. Using either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch & Cleaner scrub the surface and rinse thoroughly. Sand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch & Cleaner Once cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second …