Rule 500 Gph Auto Bilge Pump 12V

Jabsco-Rule 500 GPH Auto 12V Bilge Pump 25SA

The Rule 500 GPH Automatic Bilge Pump provides the ultimate pumping performance, which helps keep your bilge clear of nuisance water. Rule pumps are tested to the highest standards to deliver the best performance at an economical price. Float switches are not required for these fully automatic pumps. Controlled via built in sensors, the pump will turn on every 2.5 minutes for about 1 second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. Hidden air vents in the body help with the check valve and prevents locking during plumbing installations. This model features a snap-lock strainer base, which makes it easy to clean, and a thermal cut-off for added protection.

Features:

No float switch needed

Checks for water every 2-1/2 minutes

Runs for half a second

Consumes 0.25 amps per day

Submersible

Ignition protection

High efficiency, low amp motor

Non burn-out when dry

Stainless steel shaft

Back flow prevention

Easy-clean

Marine-grade blocked wiring

Thermal cut-off

Threaded discharge

Specifications:

Flow Rate: 500 Gallons Per Hour (GPH)

Voltage : 12 VDC

Fuze Size: 2.5 Amp

Amp Draw: 1.9

Height: 4"

Width: 2-3/8"

Port Type: 3/4" Hose Barb