Sea Hawk He High Load Adhesive Fiber Filler 15.2Oz

Hawk Epoxy F1 High Load Adhesive Fiber Filler

The Sea Hawk Hawk Epoxy F1 High Load Adhesive Fiber Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for bonding hardware and other applications with dissimilar materials. When used the mixture will maximize bond strength for anticipated high loads.

The Sea Hawk Hawk Epoxy F1 High Load Adhesive Fiber Filler compares to 404 High Density Filler

Features:

Thickens to a light grey color

Easy to use adhesive

Designed for bonding hardware

Maximizes bond strength for anticipated high loads

Directions For Use:

Mix the Hawk Epoxy resin and catalyst

Mix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved

Depending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:

• If you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag
• For laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency
• To ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin/catalyst/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.
• For general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.

Click here to download Hawk Epoxy Application guide