Tie Down Engineering Bunk Slicks 8 Pc 2X17

Boat Trailer 1-3/4" Bunk Slick Kit

Features:

Bolts directly onto carpeted bunk boards

Fits 2x4 standard bunk boards

Slide on or off with less effort

Easy to install

8 Pieces 1 3/4" X 17"

Bunk Slicks Installation Instructions for #86170 and #86164

With the boat on the trailer, determine the forward most point where the boat makes contact with the bunks.

Unload boat from the trailer.

Place Bunk Slick centered on the rear end of bunk so that the bunk slick is even with the end of the carpeted bunk.

Space Bunk Slicks on carpeted bunk and space evenly with no more than 4 inches between each Bunk Slick.

Area to be "covered" is from the rear end of the carpeted bunk to 5 inches past the most forward point where the boat hull comes in contact with the carpeted bunk (below).

Using the screws provided, attached the Bunk Slicks to the carpeted bunks.

Frequently Asked Questions

• What is the Boat Trailer 1-3/4" Bunk Slick Kit used for? The Boat Trailer 1-3/4" Bunk Slick Kit is designed to help a boat slide on or off carpeted trailer bunks with less effort. The bunk slicks bolt directly onto carpeted bunk boards and are designed for standard 2x4 bunk boards.
• What size bunk boards does the Boat Trailer 1-3/4" Bunk Slick Kit fit? The Boat Trailer 1-3/4" Bunk Slick Kit fits standard 2x4 bunk boards. The slicks are installed directly onto the carpeted bunk boards using the screws provided.
• How many bunk slicks are included in the kit? The kit includes 8 pieces, with each Bunk Slick measuring 1-3/4 inches by 17 inches. The pieces are designed to be spaced along the carpeted bunk boards during installation.
• How should the Boat Trailer 1-3/4" Bunk Slick Kit be installed? With the boat unloaded, center the first Bunk Slick at the rear end of the carpeted bunk. Space the remaining slicks evenly with no more than 4 inches between each piece. Cover the area from the rear of the bunk to 5 inches past the forward-most point where the boat hull contacts the bunk, then attach the slicks using the provided screws.
• Where should the Bunk Slicks be positioned on the trailer bunks? The Bunk Slicks should cover the section of the carpeted bunk that contacts the boat hull. Installation begins at the rear end of the bunk and extends to 5 inches past the most forward point where the boat hull makes contact with the carpeted bunk.