- All categories
Your cart
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Deals of the day
3649 products
3649 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$67.99
Whitecap Industries Flush Fuel Vent - 90° Features: 316 S.S. Round Head 90° Flush Fuel Vent w/Shield Hose Size: 5/8" Hole Size: 1-9/16"
$62.99
Whitecap Industries Flush Fuel Vent - Straight Features: 316 S.S. Round Head Straight Flush Fuel Vent w/Shield Hose Size: 5/8" Hole Size: 1-9/16"
$119.49
Whitecap 3995SSC Stainless Steel Pontoon Gate Latch
The Whitecap Stainless Steel Pontoon Gate Latch is easy to install and looks good on any boat. This Pontoon Gate Latch hardware will work on either left or right handed gates. Able to be installed anywhere on the tube and meets USCG 400 lbs impact test.
Specifications:
Tube: 1-1/4"
Overall Width: 1-5/16"
Works for left/right handed gates
Easy DIY install
Meets USCG 400 lbs impact test
Frequently Asked Questions
- What is the Whitecap 3995SSC Stainless Steel Pontoon Gate Latch used for? The Whitecap 3995SSC Stainless Steel Pontoon Gate Latch is designed for pontoon boat gates. It can be installed anywhere on the tube and is suitable for either left- or right-handed gates.
- What size tube does the Whitecap 3995SSC Pontoon Gate Latch fit? The Whitecap 3995SSC Pontoon Gate Latch is specified for a 1-1/4" tube. The latch has an overall width of 1-5/16". Verify your gate and tube dimensions before installation.
- Can the Whitecap 3995SSC Pontoon Gate Latch be installed on either side of a gate? Yes. The Whitecap 3995SSC Stainless Steel Pontoon Gate Latch works with both left- and right-handed gates, providing flexibility when replacing or installing pontoon gate hardware.
- Is the Whitecap 3995SSC Pontoon Gate Latch easy to install? The Whitecap 3995SSC Pontoon Gate Latch is designed for easy DIY installation. It can be installed anywhere on the tube, allowing you to position the latch where needed on the pontoon gate.
- Does the Whitecap 3995SSC Pontoon Gate Latch meet a USCG impact test requirement? Yes. The Whitecap 3995SSC Stainless Steel Pontoon Gate Latch meets the USCG 400 lbs impact test, according to the supplied product specifications.
$44.99
Whitecap Industries Non-Locking Nylon T Handle w/Latch
Whitecap Industries Non-Locking T-Handle available in black with a chrome plated handle or white with a white nylon handle. Overall dimension - 3" Cut-Out - 2-1/2"
Surface Depth - 1/8" - 3/4"
Fastener included
Frequently Asked Questions
- What is the Whitecap Industries Non-Locking Nylon T Handle w/Latch used for? The Whitecap Industries Non-Locking T-Handle w/Latch is a non-locking handle available in black with a chrome plated handle or white with a white nylon handle. It is designed for applications requiring a T-handle with a latch.
- What are the dimensions of the Whitecap Industries Non-Locking T-Handle w/Latch? The Whitecap Industries Non-Locking T-Handle w/Latch has an overall dimension of 3" and requires a 2-1/2" cut-out.
- What surface depths can the Whitecap Industries Non-Locking T-Handle w/Latch accommodate? The Whitecap Industries Non-Locking T-Handle w/Latch is designed for surface depths from 1/8" to 3/4". Verify the surface depth and cut-out dimensions before installation.
- What color options are available for the Whitecap Industries Non-Locking T-Handle w/Latch? The Whitecap Industries Non-Locking T-Handle w/Latch is available in black with a chrome plated handle or white with a white nylon handle.
- Does the Whitecap Industries Non-Locking T-Handle w/Latch include fasteners? Yes. Fasteners are included with the Whitecap Industries Non-Locking T-Handle w/Latch.
$57.49
Whitecap Industries T Handle Latch w/ Lock
Locking White or black nylon T-Handle Latches Overall diameter: 3" Cut-Out: 2-1/2"
Surface Depth: 1/8" - 3/4"
Fastener is included
Available in Black or White
$15.99
CAPTAIN is embroidered boldly across the front of a navy colored cap. The cap has a constructed crown, scrambled eggs on the brim and is fully adjustable.
From $33.49
For boat owners or boat owner wannabees.
The cap includes scrambled eggs on the brim and gold embroidered insignia on the cap. Put this cap on and become the 'Skipper' marooned on a desert island, and use it to your master the mates.
Approx.3 1/2" Crown2 1/2" Bill
Made of:100% Cotton
Black Cotton Twill Bill/VisorEmbroidered Bill and CrownSatin LinedAdjustable Snapback
Size: One Size Fits Most. Plastic snap adjuster at back. Fits up to size 7 3/8 (Large).
From $33.99
Adjustable cover support pole.
Adjusts from 26" - 47", 48" - 59", or 60" - 70"
Easy flip-lock clamp for quick adjusting.
Pole only comes with 1 rubber foot
$20.99
Vico Plastics Rubber Swivel Pad - 7/8"
$25.99
Boat Vent III Boat Cover Vent
Boat Vent 3 is an improvement on Boat Vent II, which made its name in the marine industry over the last two decades through adding value to covered boats by venting and tenting, preventing mildew and mold. Molded from the highest UV inhibited plastic on the planet, it can be installed to virtually any boat cover. Boat Vent 3 features four major improvements over Boat Vent II: - 40% more venting - Overhanging top to allow in less moisture - 30 teeth on the washer for a better grip - Ergonomic reversible nut for easy installation.
Please note: Boat Cover Vents are now assembled with the lower washer upside-down. This new assembly allows the vent to be pulled apart much quicker and easier than before. Continue to install the vents in the cover just like before. Refer to picture above.
$22.99
Boat Vent II Boat Cover Vent
Repair boat covers easily with the boat vent system.
Please note: Boat Cover Vents are now assembled with the lower washer upside-down. This new assembly allows the vent to be pulled apart much quicker and easier than before. Continue to install the vents in the cover just like before. Refer to picture above.
$38.09
UFlex X34 Mounting Bezel
The X34 by UFlex is a 90° mounting bezel designed for when the wheel is perpendicular to the boat dashboard.
Steering System Application:
T71FC
T72FC
T73NRFC
T74NRFC
G86
G88
Click here for UFlex X34 Mounting Bezel Installation Instructions
$30.99
UFlex Marine Hydraulic Steering Fluid - Quart
This hydraulic steering fluid is designed to provide optimal steering performance and system longevity in UFlex boat steering systems. This product is sold in 1 us quart containers.
From $57.29
Uflex MachZero Universal Control Cable
The Uflex MachZero cable is specifically constructed to make the toughest cable installations result in a smooth, easy, and precise shift throttle movement. Mach Control Cables are the perfect solution for long cable runs, tight bends, or where effortless and accurate throttle response is required. These maintenance free cables offer smoother operation while being suitable for outboard, inboard, & sterndrive applications.
The patented MACH cables offer high performance built off decades of experiences. The innovative core design maximizes efficiency while minimizing the motion lost. The design of the conduit provides high levels of flexibility. Uflex MachZero control cables are long lasting cables that are perfect to meet your control setup. These control cables are designed for use with Yamaha models over 60HP, as well as Suzuki, Honda, Nissan, Tohatsu, Selva, & Volvo models.
Stroke: 87 MM (3.4")
Features:
Outboard, Inboard, Sterndrive Application
High efficiency
High flexibility
Ideal for Complex Cable Routing
Maintenance free
Smooth Operation
Stainless steel cables end fittings
High resistance blue outer jacket
Interchangeable:
Teleflex
TFXTREME CC223
Morse
33C Supreme 301947-003
How to Order a Uflex Mach36 Series Control Cable - Measure Twice, Order Once
For a New Installation: Measure the distance from control to the clutch or throttle connection following an uninstructed path. Taking the length and rounding up gives you the required cable length. It is recommended that cables have a 8"(200 mm) minimum radius. To allow for engine movement outboard applications it is necessary to add 3 ft.
For Replacement of Existing Cable: If you removed the old cable, lie cable out flat and measure from tip to tip, rounding up. Cables are ordered by length or feet.
From $72.29
Uflex Mach5 Mercury/Mercruiser/Mariner Control Cable The Uflex Mach5 cable is specifically constructed to make the toughest cable installations result in a smooth, easy, and precise shift throttle movement. Mach Control Cables are the perfect solution for long cable runs, tight bends, or where effortless and accurate throttle response is required. These maintenance free cables offer smoother operation while being suitable for outboard, inboard, & sterndrive applications. The patented MACH cables offer high performance built off decades of experiences. The innovative core design maximizes efficiency while minimizing the motion lost. The design of the conduit provides high levels of flexibility. Uflex Mach5 control cables are long lasting cables that are perfect to meet your control setup. This control cable is for use with Mercury, Mercruiser, & Mariner setups that are over 50HP Stroke: 95 MM (3.75") Interchangeable: Teleflex 600A CC179 Morse KM 637323 Features: Outboard, Inboard, Sterndrive Application High efficiency For Mercury, Mercruiser, Mariner over 50HP High flexibility Ideal for Complex Cable Routing Maintenance free Smooth Operation Stainless steel cables end fittings High resistance blue outer jacket How to Order a Uflex Mach5 Series Control Cable - Measure Twice, Order Once For a New Installation: Measure the distance from control to the clutch or throttle connection following an uninstructed path. Taking the length and rounding up gives you the required cable length. It is recommended that cables have a 8"(200 mm) minimum radius. To allow for engine movement outboard applications it is necessary to add 3 ft. For Replacement of Existing Cable: If you removed the old cable, lie cable out flat and measure from tip to tip, rounding up. Cables are ordered by length or feet.
From $64.29
Uflex Mach 36 Mercury Gen II Control Cable
The Uflex Mach36 cable is specifically constructed to make the toughest cable installations result in a smooth, easy, and precise shift throttle movement. Mach Control Cables are the perfect solution for long cable runs, tight bends, or where effortless and accurate throttle response is required. These maintenance free cables offer smoother operation while being suitable for outboard, inboard, & sterndrive applications.
The patented MACH cables offer high performance built off decades of experiences. The innovative core design maximizes efficiency while minimizing the motion lost. The design of the conduit provides high levels of flexibility. Uflex Mach 36 control cables are long lasting cables that are perfect to meet your control setup. These control cables are designed for use with Mercury Gen II models.
Stroke: 87 MM (3.4")
Features:
Outboard, Inboard, Sterndrive Application
High efficiency
High flexibility
Ideal for Complex Cable Routing
Maintenance free
Smooth Operation
Stainless steel cables end fittings
High resistance blue outer jacket
How to Order a Uflex Mach36 Series Control Cable - Measure Twice, Order Once
For a New Installation: Measure the distance from control to the clutch or throttle connection following an uninstructed path. Taking the length and rounding up gives you the required cable length. It is recommended that cables have a 8"(200 mm) minimum radius. To allow for engine movement outboard applications it is necessary to add 3 ft.
For Replacement of Existing Cable: If you removed the old cable, lie cable out flat and measure from tip to tip, rounding up. Cables are ordered by length or feet.
From $72.79
Uflex Mach14 BRP/Johnson/Evinrude/OMC Control Cable The Uflex Mach14 cable is specifically constructed to make the toughest cable installations result in a smooth, easy, and precise shift throttle movement. Mach Control Cables are the perfect solution for long cable runs, tight bends, or where effortless and accurate throttle response is required. These maintenance free cables offer smoother operation while being suitable for outboard, inboard, & sterndrive applications. The patented MACH cables offer high performance built off decades of experiences. The innovative core design maximizes efficiency while minimizing the motion lost. The design of the conduit provides high levels of flexibility. Uflex Mach 14 control cables are long lasting cables that are perfect to meet your control setup. These control cables are designed for use with 1979 to present OMC/Johnson/Evinrude/BRP models. Stroke: 75 MM (3") Interchangeable: Teleflex 479 Type CC205 Morse 43C Redline 65835-003 Features: Outboard, Inboard, Sterndrive Application High efficiency High flexibility Ideal for Complex Cable Routing Maintenance free Smooth Operation Stainless steel cables end fittings High resistance blue outer jacket How to Order a Uflex Mach36 Series Control Cable - Measure Twice, Order Once For a New Installation: Measure the distance from control to the clutch or throttle connection following an uninstructed path. Taking the length and rounding up gives you the required cable length. It is recommended that cables have a 8"(200 mm) minimum radius. To allow for engine movement outboard applications it is necessary to add 3 ft. For Replacement of Existing Cable: If you removed the old cable, lie cable out flat and measure from tip to tip, rounding up. Cables are ordered by length or feet.
From $52.29
Uflex C8 Universal Control Cable
This Universal Control Cable is intended for use with inboard, sterndrive and outboard engines. It is designed for use with Yamaha, Suzuki, Honda, Nissan, Tohatsu, Selva, Volvo.
Stroke: 87 mm (3.4")
Interchange:
Teleflex
Miracable CC330
Premium CC199
Morse
33C Red Jacket 32377-003
How to Order a Uflex C8 Series Control Cable - Measure Twice, Order Once
For a New Installation: Measure the distance from control to the clutch or throttle connection following an uninstructed path. Taking the length and rounding up gives you the required cable length. It is recommended that cables have a 8"(200 mm) minimum radius. To allow for engine movement outboard applications it is necessary to add 3 ft.
For Replacement of Existing Cable: If you removed the old cable, lie cable out flat and measure from tip to tip, rounding up. Cables are ordered by length or feet.
From $45.59
Uflex C5 Mercury - Mercruiser Control Cable The Control Cable is intended for Mercury and Mercruiser OEM engines. Stroke: 95 mm (3.75") Interchange: Telefex 600A CC179 Morse Type KM 637323 How to Order a Uflex C5 Series Control Cable - Measure Twice, Order Once For a New Installation: Measure the distance from control to the clutch or throttle connection following an uninstructed path. Taking the length and rounding up gives you the required cable length. It is recommended that cables have a 8"(200 mm) minimum radius. To allow for engine movement outboard applications it is necessary to add 3 ft. For Replacement of Existing Cable: If you removes the old cable, lie cable flat and measure from tip to tip, rounding up. Cables are ordered by length or feet.
From $51.29
Uflex C36 Mercury/Mercruiser Control Cable
The Control Cable is intended for Mercury® and Mercruiser® OEM engines and Mercury® Generation II™ series controls.
Stroke: 87 mm (3.4”)
How to Order a Uflex C36 Series Cable - Measure Twice, Order Once
For a New Installation: Measure the distance from control to the clutch or throttle connection following an uninstructed path. Taking the length and rounding up gives you the required cable length. It is recommended that cables have a 8"(200 mm) minimum radius. To allow for engine movement outboard applications it is necessary to add 3 ft.
For Replacement of Existing Cable: If you removes the old cable, lie cable flat and measure from tip to tip, rounding up. Cables are ordered by length or feet.
$78.99
Turning Point 508 Hub KitThe Turning Point 508 Hub Kit connects a compatible Turning Point propeller to the propeller shaft on the engine applications listed below. Confirm the engine manufacturer, model, year, spline count, and gearcase size before ordering; horsepower alone does not establish fitment.FeaturesApplication-specific Turning Point hub kit 508Fitment chart covers compatible Honda and Tohatsu applicationsTurning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems for compatible 4.25-inch and 4.75-inch gearcase applications.Engine Application ChartMatch every applicable specification in the chart to your engine and propeller setup before purchasing.ManufacturerEngine ModelYearsHub KitSplineGearcaseHondaBF200A2013 & Newer508154.25"HondaBF225A2013 & Newer508154.25"HondaBF250A2012 & Newer508154.25"TohatsuBFT115, BFT150, BFT200, BFT225, BFT250508154.25"Frequently Asked QuestionsHow do I know if the Turning Point 508 Hub Kit fits my engine?Match your engine manufacturer, model, stroke or cycle, year, spline count, and gearcase size to the application chart. Do not select a hub kit by horsepower alone.Does the Turning Point 508 Hub Kit fit every Honda and Tohatsu engine?No. Fitment is limited to the specific applications shown in the chart. Similar-horsepower engines can use different spline counts, gearcase sizes, or hub kits.Does the hub kit need to match both the engine and propeller?Yes. The hub kit must match the engine propeller shaft and gearcase application as well as the compatible Turning Point propeller hub system.Is the Turning Point 508 Hub Kit interchangeable with other hub systems?For compatible 4.25-inch and 4.75-inch gearcase applications, the Turning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems. Always confirm the complete application before ordering.Where can I get help choosing a compatible propeller?Use Wholesale Marine's Propeller Finder to narrow down compatible propeller options for your boat and engine.{"@context":"https://schema.org","@type":"FAQPage","mainEntity":[{"@type":"Question","name":"How do I know if the Turning Point 508 Hub Kit fits my engine?","acceptedAnswer":{"@type":"Answer","text":"Match your engine manufacturer, model, stroke or cycle, year, spline count, and gearcase size to the application chart. Do not select a hub kit by horsepower alone."}},{"@type":"Question","name":"Does the Turning Point 508 Hub Kit fit every Honda and Tohatsu engine?","acceptedAnswer":{"@type":"Answer","text":"No. Fitment is limited to the specific applications shown in the chart. Similar-horsepower engines can use different spline counts, gearcase sizes, or hub kits."}},{"@type":"Question","name":"Does the hub kit need to match both the engine and propeller?","acceptedAnswer":{"@type":"Answer","text":"Yes. The hub kit must match the engine propeller shaft and gearcase application as well as the compatible Turning Point propeller hub system."}},{"@type":"Question","name":"Is the Turning Point 508 Hub Kit interchangeable with other hub systems?","acceptedAnswer":{"@type":"Answer","text":"For compatible 4.25-inch and 4.75-inch gearcase applications, the Turning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems. Always confirm the complete application before ordering."}},{"@type":"Question","name":"Where can I get help choosing a compatible propeller?","acceptedAnswer":{"@type":"Answer","text":"Use Wholesale Marine's Propeller Finder to narrow down compatible propeller options for your boat and engine: https://www.wholesalemarine.com/boat-propellers/"}}]}
$85.99
Turning Point 507 Hub KitThe Turning Point 507 Hub Kit connects a compatible Turning Point propeller to the propeller shaft on the engine applications listed below. Confirm the engine manufacturer, model, year, spline count, and gearcase size before ordering; horsepower alone does not establish fitment.FeaturesApplication-specific Turning Point hub kit 507Fitment chart covers compatible Honda, Johnson and Suzuki applicationsTurning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems for compatible 4.25-inch and 4.75-inch gearcase applications.Engine Application ChartMatch every applicable specification in the chart to your engine and propeller setup before purchasing.ManufacturerEngine ModelStroke/CycleYearsHub KitSplineGearcaseHondaP60507154.25"Honda75HP, 90HP1999 & Newer507154.25"Honda115HP, 130HP, (not 115D)507154.25"HondaBF115D, BF135, BF150, BF2002002-2012507154.25"HondaBF2252002-2012507154.25"Johnson200HP, 225HP4507154.25"Suzuki150HP-300HP507154.25"Frequently Asked QuestionsHow do I know if the Turning Point 507 Hub Kit fits my engine?Match your engine manufacturer, model, stroke or cycle, year, spline count, and gearcase size to the application chart. Do not select a hub kit by horsepower alone.Does the Turning Point 507 Hub Kit fit every Honda, Johnson and Suzuki engine?No. Fitment is limited to the specific applications shown in the chart. Similar-horsepower engines can use different spline counts, gearcase sizes, or hub kits.Does the hub kit need to match both the engine and propeller?Yes. The hub kit must match the engine propeller shaft and gearcase application as well as the compatible Turning Point propeller hub system.Is the Turning Point 507 Hub Kit interchangeable with other hub systems?For compatible 4.25-inch and 4.75-inch gearcase applications, the Turning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems. Always confirm the complete application before ordering.Where can I get help choosing a compatible propeller?Use Wholesale Marine's Propeller Finder to narrow down compatible propeller options for your boat and engine.{"@context":"https://schema.org","@type":"FAQPage","mainEntity":[{"@type":"Question","name":"How do I know if the Turning Point 507 Hub Kit fits my engine?","acceptedAnswer":{"@type":"Answer","text":"Match your engine manufacturer, model, stroke or cycle, year, spline count, and gearcase size to the application chart. Do not select a hub kit by horsepower alone."}},{"@type":"Question","name":"Does the Turning Point 507 Hub Kit fit every Honda, Johnson and Suzuki engine?","acceptedAnswer":{"@type":"Answer","text":"No. Fitment is limited to the specific applications shown in the chart. Similar-horsepower engines can use different spline counts, gearcase sizes, or hub kits."}},{"@type":"Question","name":"Does the hub kit need to match both the engine and propeller?","acceptedAnswer":{"@type":"Answer","text":"Yes. The hub kit must match the engine propeller shaft and gearcase application as well as the compatible Turning Point propeller hub system."}},{"@type":"Question","name":"Is the Turning Point 507 Hub Kit interchangeable with other hub systems?","acceptedAnswer":{"@type":"Answer","text":"For compatible 4.25-inch and 4.75-inch gearcase applications, the Turning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems. Always confirm the complete application before ordering."}},{"@type":"Question","name":"Where can I get help choosing a compatible propeller?","acceptedAnswer":{"@type":"Answer","text":"Use Wholesale Marine's Propeller Finder to narrow down compatible propeller options for your boat and engine: https://www.wholesalemarine.com/boat-propellers/"}}]}
$78.99
Turning Point 506 Hub KitThe Turning Point 506 Hub Kit connects a compatible Turning Point propeller to the propeller shaft on the engine applications listed below. Confirm the engine manufacturer, model, year, spline count, and gearcase size before ordering; horsepower alone does not establish fitment.FeaturesApplication-specific Turning Point hub kit 506Fitment chart covers compatible Suzuki applicationsTurning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems for compatible 4.25-inch and 4.75-inch gearcase applications.Engine Application ChartMatch every applicable specification in the chart to your engine and propeller setup before purchasing.ManufacturerEngine ModelStroke/CycleYearsHub KitSplineGearcaseSuzuki75-140HP2(DT)1989 & Newer506134.25"Suzuki60HP, 70HP4(DF)1998-2009506134.25"Frequently Asked QuestionsHow do I know if the Turning Point 506 Hub Kit fits my engine?Match your engine manufacturer, model, stroke or cycle, year, spline count, and gearcase size to the application chart. Do not select a hub kit by horsepower alone.Does the Turning Point 506 Hub Kit fit every Suzuki engine?No. Fitment is limited to the specific applications shown in the chart. Similar-horsepower engines can use different spline counts, gearcase sizes, or hub kits.Does the hub kit need to match both the engine and propeller?Yes. The hub kit must match the engine propeller shaft and gearcase application as well as the compatible Turning Point propeller hub system.Is the Turning Point 506 Hub Kit interchangeable with other hub systems?For compatible 4.25-inch and 4.75-inch gearcase applications, the Turning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems. Always confirm the complete application before ordering.Where can I get help choosing a compatible propeller?Use Wholesale Marine's Propeller Finder to narrow down compatible propeller options for your boat and engine.{"@context":"https://schema.org","@type":"FAQPage","mainEntity":[{"@type":"Question","name":"How do I know if the Turning Point 506 Hub Kit fits my engine?","acceptedAnswer":{"@type":"Answer","text":"Match your engine manufacturer, model, stroke or cycle, year, spline count, and gearcase size to the application chart. Do not select a hub kit by horsepower alone."}},{"@type":"Question","name":"Does the Turning Point 506 Hub Kit fit every Suzuki engine?","acceptedAnswer":{"@type":"Answer","text":"No. Fitment is limited to the specific applications shown in the chart. Similar-horsepower engines can use different spline counts, gearcase sizes, or hub kits."}},{"@type":"Question","name":"Does the hub kit need to match both the engine and propeller?","acceptedAnswer":{"@type":"Answer","text":"Yes. The hub kit must match the engine propeller shaft and gearcase application as well as the compatible Turning Point propeller hub system."}},{"@type":"Question","name":"Is the Turning Point 506 Hub Kit interchangeable with other hub systems?","acceptedAnswer":{"@type":"Answer","text":"For compatible 4.25-inch and 4.75-inch gearcase applications, the Turning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems. Always confirm the complete application before ordering."}},{"@type":"Question","name":"Where can I get help choosing a compatible propeller?","acceptedAnswer":{"@type":"Answer","text":"Use Wholesale Marine's Propeller Finder to narrow down compatible propeller options for your boat and engine: https://www.wholesalemarine.com/boat-propellers/"}}]}
$78.99
Turning Point 505 Hub KitThe Turning Point 505 Hub Kit connects a compatible Turning Point propeller to the propeller shaft on the engine applications listed below. Confirm the engine manufacturer, model, year, spline count, and gearcase size before ordering; horsepower alone does not establish fitment.FeaturesApplication-specific Turning Point hub kit 505Fitment chart covers compatible Yamaha and Nissan & Tohatsu applicationsTurning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems for compatible 4.25-inch and 4.75-inch gearcase applications.Engine Application ChartMatch every applicable specification in the chart to your engine and propeller setup before purchasing.ManufacturerEngine ModelStroke/CycleHub KitSplineGearcaseYamaha115HP, 130HP2-Stroke505154.25"Yamaha115HP4-Stroke505154.25"Nissan & Tohatsu60C, 70C505154.25"Nissan & Tohatsu90-140HP505154.25"Frequently Asked QuestionsHow do I know if the Turning Point 505 Hub Kit fits my engine?Match your engine manufacturer, model, stroke or cycle, year, spline count, and gearcase size to the application chart. Do not select a hub kit by horsepower alone.Does the Turning Point 505 Hub Kit fit every Yamaha and Nissan & Tohatsu engine?No. Fitment is limited to the specific applications shown in the chart. Similar-horsepower engines can use different spline counts, gearcase sizes, or hub kits.Does the hub kit need to match both the engine and propeller?Yes. The hub kit must match the engine propeller shaft and gearcase application as well as the compatible Turning Point propeller hub system.Is the Turning Point 505 Hub Kit interchangeable with other hub systems?For compatible 4.25-inch and 4.75-inch gearcase applications, the Turning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems. Always confirm the complete application before ordering.Where can I get help choosing a compatible propeller?Use Wholesale Marine's Propeller Finder to narrow down compatible propeller options for your boat and engine.{"@context":"https://schema.org","@type":"FAQPage","mainEntity":[{"@type":"Question","name":"How do I know if the Turning Point 505 Hub Kit fits my engine?","acceptedAnswer":{"@type":"Answer","text":"Match your engine manufacturer, model, stroke or cycle, year, spline count, and gearcase size to the application chart. Do not select a hub kit by horsepower alone."}},{"@type":"Question","name":"Does the Turning Point 505 Hub Kit fit every Yamaha and Nissan & Tohatsu engine?","acceptedAnswer":{"@type":"Answer","text":"No. Fitment is limited to the specific applications shown in the chart. Similar-horsepower engines can use different spline counts, gearcase sizes, or hub kits."}},{"@type":"Question","name":"Does the hub kit need to match both the engine and propeller?","acceptedAnswer":{"@type":"Answer","text":"Yes. The hub kit must match the engine propeller shaft and gearcase application as well as the compatible Turning Point propeller hub system."}},{"@type":"Question","name":"Is the Turning Point 505 Hub Kit interchangeable with other hub systems?","acceptedAnswer":{"@type":"Answer","text":"For compatible 4.25-inch and 4.75-inch gearcase applications, the Turning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems. Always confirm the complete application before ordering."}},{"@type":"Question","name":"Where can I get help choosing a compatible propeller?","acceptedAnswer":{"@type":"Answer","text":"Use Wholesale Marine's Propeller Finder to narrow down compatible propeller options for your boat and engine: https://www.wholesalemarine.com/boat-propellers/"}}]}
Showing 72/3649
Related collections
In stock products from the current catalog.
- Choosing a selection results in a full page refresh.
- Opens in a new window.