Boat Life

Boatlife "Release" Adhesive and Sealant Remover

Boatlife's Release is ideal for removing cured silicone, polyurethane, and polysulfide. Use a scraping tool and Release to remove cured sealants from fiberglass, wood, metal, and glass. It is ideal on residue from decals, tapes, labels and adhesives, and is safe on most carpeted, vinyl, plastic and painted surfaces. Release simplifies the use of sealants, allowing for a fast cleanup.

***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***

Boatlife Marine Silicone Rubber Sealant

Boatlife Marine Silicone Rubber Sealant is an all-purpose, 100% marine high quality silicone sealant. This sealant is non-corrosive, acid-free, non-yellowing, mildew-resistant, and low-odor. This silicone rubber sealant is for use above or below the waterline. Features superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Boatlife's Silicone Rubber Sealant retains flexibility and tensile strength even after years of exposure. This product is great for applications where speed is important - it is tack-free in 30 minutes or less and fully cured in 24 hours.

Features:

All-purpose high quality silicone sealant

Will not shrink, crack, or dry out

Retains flexibility and tensile strength after years of exposure

Will not corrode metal or electronics

Neutral curing system

Sizes Available:

Squeeze Tube

1 oz

2.8 oz

Cartridge (for caulking gun)

10.6 oz

***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***

Frequently Asked Questions

• What is Boatlife Marine Silicone Rubber Sealant used for? Boatlife Marine Silicone Rubber Sealant is an all-purpose 100% silicone sealant for marine applications above or below the waterline. It provides flexible adhesion to fiberglass, plastic, metal, and wood and is designed to retain its flexibility and tensile strength after prolonged exposure.
• Can Boatlife Marine Silicone Rubber Sealant be used above and below the waterline? Yes. Boatlife Marine Silicone Rubber Sealant is formulated for use both above and below the waterline. It is suitable for applications involving fiberglass, plastic, metal, and wood where a flexible marine silicone sealant is needed.
• How quickly does Boatlife Marine Silicone Rubber Sealant cure? Boatlife Marine Silicone Rubber Sealant becomes tack-free in 30 minutes or less and fully cures in approximately 24 hours. Its relatively fast tack-free time makes it suitable for applications where a quick initial set is important.
• Is Boatlife Marine Silicone Rubber Sealant safe for use around metal and electronics? Yes. The sealant uses a neutral curing system and is described as non-corrosive and acid-free. It is also formulated not to corrode metal or electronics, making it suitable for applications where these materials may be present.
• What sizes of Boatlife Marine Silicone Rubber Sealant are available? Boatlife Marine Silicone Rubber Sealant is available in squeeze tubes and cartridges. Squeeze tube sizes include 1 oz and 2.8 oz, while the cartridge size is 10.6 oz and is designed for use with a caulking gun.

Boatlife Life-Seal Silicone-Polyurethane Sealant

Boatlife Life-Seal is a unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware.

Will adhere to metal, glass, wood, Lexan, ABS, and certain other materials.

Can be removed without damaging gel-coat.

Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials.

Cures in presence of water.

Mildew resistant and acid free.

Sizes Available:

Squeeze Tube

1 oz

2.8 oz

Cartridge (for caulking gun)

10.6 oz

***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***

How to Use Boatlife Life Seal Sealant

Before applying, ensure entire surface is clean and oil free.

Life Seal can either be applied using the squeeze tube or via caulking gun (using 10.6 oz cartridge)

Life Seal will skin over in 10 minutes.

Allow 24 hours to fully cure.

Frequently Asked Questions

• What is Boatlife Life-Seal Silicone-Polyurethane Sealant used for? Boatlife Life-Seal Silicone-Polyurethane Sealant is a marine sealant formulated especially for fiberglass. It provides a durable, watertight seal for joints subject to structural movement and can be used above or below the waterline for applications such as decks to hulls, thru-hull fittings, vinyl ports, windshields, and marine hardware.
• What materials can Boatlife Life-Seal adhere to? Boatlife Life-Seal is designed to adhere to fiberglass and can also adhere to metal, glass, wood, Lexan, ABS, and certain other materials. Surfaces should be clean and free of oil before application to help ensure proper adhesion.
• Can Boatlife Life-Seal be used above and below the waterline? Yes. Boatlife Life-Seal can be used for marine sealing applications both above and below the waterline. It cures in the presence of water and is formulated to provide a permanent watertight seal while accommodating structural movement.
• How do I apply Boatlife Life-Seal Sealant? Before application, make sure the entire surface is clean and oil free. Life-Seal can be applied directly from the squeeze tube or with a caulking gun when using the 10.6 oz cartridge. Apply the sealant to the intended joint or area and allow it to cure according to the stated curing time.
• How long does Boatlife Life-Seal take to cure? Boatlife Life-Seal skins over in approximately 10 minutes and requires 24 hours to fully cure. The product is formulated as a fast-curing marine sealant and can cure in the presence of water.
• Where should Boatlife Life-Seal not be used? Boatlife Life-Seal is not recommended for ferro cement hulls, impregnated wood, or oil-soaked materials. Before application, surfaces should be clean and free of oil. The product description also identifies fiberglass as its specifically formulated application material.

BoatLife Git Rot Penetrating Epoxy Kit

BoatLife Git Rot system is a superior product to combat dry rot because it works without having to remove dry rotted fibers. Unique two-part liquid Git Rot Epoxy saturates and restores original strength to wood by penetrating the rot. Wood must be dry for application. Apply by injecting "Git" Rot Epoxy into the wood. The epoxy will soak into wood by capillary action.

Cures overnight

Sandable and paintable, can be drilled and screwed

Compatible with fiberglass resins, epoxies and most sealants

Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats

***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***

How to Use BoatLife Git Rot Epoxy

For complete saturation and ultimate strength (in average type rot), it will require a volume of Git Rot approximately equal to half the volume of the rotted wood.

Time and Temperature

Optimum temperature for applying Git Rot Epoxy is between 50°F and 70°F.

Only mix small batches (not more than 4 oz.) since the larger the quantity the greater the reaction and the faster the cure.

After adding 1 part "B" to 3 parts "A", shake vigorously for at least 1 full minute. Once the two parts have been thoroughly mixed, a thermal reaction will begin to occur.

Penetration is best immediately after mixing.

Provide Reservoirs

Where rot is deep into a large member, it is advisable to drill a staggered series of overlapping holes approximately 1/4" in diameter, 2" apart, slanting downwards. This will expose the necessary end grain and provide reservoirs for the penetration.

In areas where sections of rot contain extensive holes where wood fibers are actually missing, it is recommended to mix sawdust with Git Rot Epoxy and use it as a fill material.

In areas such as transoms, stringers, and balsa core decking, drilling thru the fiberglass surface may be necessary. For transom repairs, you may drill vertically down through the transom, and then pour in Git Rot.

For decking, drill through the surface to treat the wood underneath. Holes left by drilling may be filled with a mixture of dry saw dust and Git Rot or a marine repair epoxy compound.

Application

The fastest and most efficient way to apply Git Rot epoxy is into the end grain of the wood.

To avoid trapping air in the middle of the rot, always start at one end or on one surface and work progressively along.

Continue until complete saturation is achieved. *This is determined when the reservoir holes fill and remain filled, and the surface remains shiny

Properly applied, Git Rot solidifies into a tough resilient mass overnight. Allow one week for ultimate strength.

Click here to download BoatLIFE Git Rot application tips from the manufacturer.

Git Rot Epoxy will eventually cure into damp wood, however wet wood cannot be fully saturated or the product will lose its effectiveness. Be sure to dry the area as much as possible before application.

Frequently Asked Questions

• What is BoatLife Git Rot Penetrating Epoxy Kit used for? BoatLife Git Rot Penetrating Epoxy Kit is designed to penetrate and restore dry-rotted wood without requiring removal of the rotted fibers. It can be used for rot repairs in transoms, stringers, and cabin roofs on fiberglass and wood boats. The epoxy saturates the wood through capillary action and restores strength as it cures.
• Does the wood need to be dry before applying BoatLife Git Rot Epoxy? Yes. The wood should be dried as much as possible before application because wet wood cannot be fully saturated and can reduce the product's effectiveness. Although Git Rot Epoxy will eventually cure in damp wood, penetration is best when the wood is dry.
• What is the mixing ratio for BoatLife Git Rot Epoxy? Mix 1 part of component B with 3 parts of component A. Only mix small batches of no more than 4 ounces because larger quantities create a greater reaction and faster cure. Shake the two components vigorously for at leas…

Boatlife Life Calk Polysulfide Sealant

Boatlife's Life-Calk is a long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted, and used above and below the waterline. Life Calk Sealant is tack-free in 1 to 3 days, and fully cures in 7-10 days (weather dependent). This polysulfide sealant has excellent resistance to teak oils, gasoline and diesel fuel. Boatlife Life-Calk is ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams.

Features:

Will bond to fiberglass, wood, metal, glass, and itself.

Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities.

Can be applied underwater for emergency repairs.

Can be applied to damp surfaces.

Sizes Available:

Squeeze Tube

1 oz

2.8 oz

Cartridge (for caulking gun)

5.2 oz

10.6 oz

**Not compatible with all paints - Sikkens, Cetol, Deks, Olje

***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***

Tips for Using Boatlife's Life-Calk Sealant

To speed cure time, spray a little water onto one-part Life-Calk

To clean up tools, equipment and uncured Life-Calk, use Boatlife Life-Calk Solvent and Cleaner or Boatlife Release.

In cold areas, warm cartridges and tubes before use.