- All categories
Your cart
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
3M
12 products
12 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$3.99
3M™ All Purpose Sanding Sponge - CP002 Medium Grit 3-3/4" x 2-5/8" x 1"
3M™ All Purpose Sponge is ideal for sanding wood, paint, metal, plastic and drywall. The medium grit is ideal for moderate stripping or surface leveling in preperation of a top coat. Using conventional 3M abrasives the flexible foam is easy to hold and sands flat, contoured, or irregular surfaces.
Features:
Use wet or dry
Block shape for comfort
Great for flat, contoured, or irregular surfaces
For best sanding results, sand with the grain of the surface. Work through a sequence of grits, from course to very fines, skipping no more than one grit between each sanding step.
$6.99
Utility purpose paper tape. A non-critical masking and holding tape.
$5.99
3M™ Large Area Sanding Sponge is ideal for either dry or wet sanding of wood, paint, metal, plastic and drywall. When finished simply rinse and reuse. Two grades on one sponge; fine/medium.
$3.99
3M™ Full Size Sanding Sponge is ideal for dry or wet sanding of wood, paint, metal, plastic and drywall. When finished, simply rinse and reuse. Conformable, comfortable, flexible and convenient and available in fine grade.
$13.99
This tape removes cleanly without adhesive transfer or surface damage for up to 14 days, even in direct sunlight. It is a medium adhesion tape that is ideal for painted walls and trim, woodwork, glass and metal. 60yds x 2"w
$6.49
This tape removes cleanly without adhesive transfer or surface damage for up to 14 days, even in direct sunlight. It is a medium adhesion tape that is ideal for painted walls and trim, woodwork, glass and metal. 60yds x 3/4"w
$4.99
3M™ Contour Surface Sanding Sponge 06965, 4.5 in x 5.5 in x .1875 in, Fine
Fine ranges from grade 320 to 400. 3M™ Contour Surface Sanding Sponge is ideal for sanding wood, paint, metal, plastic and drywall. The contoured sponge can be used for either dry or wet sanding and can be rinsed and reused. Extremely flexible, softback.
$2.99
3M™ Contour Surface Sanding Sponge 06964, 4.5 in x 5.5 in x .1875 in, Super Fine
3M™ Contour Surface Sanding Sponge is ideal for sanding wood, paint, metal, plastic and drywall. The contoured sponge can be used for either dry or wet sanding and can be rinsed and reused. Extremely flexible, softback.
From $37.69
3M Marine Grade Clear Silicone Sealant
This high quality silicone sealant is a one-component cure, sealant engineered to withstand the harsh marine environment. This weather-resistant sealant is formulated to resist mildew and form a non-yellowing seal for above waterline applications. In addition, this marine sealant is high-temperature resistant and remains flexible even after years of exposure. The non-shrinking and non-sagging properties of this product offer simple and efficient application.
High quality silicone sealant
For above the waterline interior/exterior sealing
Adheres to bare and painted metal, fiberglass, glass, non-oily woods, many plastics and abraded rubber
Excellent discoloration resistance
Mildew-resistant
Moisture-curing
Specifications;
Color: Clear
Full Cure: 24-48 Hours
Tack Free Time: 20 Minutes
Tensile Strength (imperial): 220 psi
Application Method: Hand or pressure caulk
Application Temperature: 40°-100°F
$58.79
3M 4200 Polyurethane Fast Cure Adhesive-Sealant 10oz White
3M Fast Cure Marine Sealant is a one-component, medium-strength, moisture-curing, gap-filling polyurethane that delivers strong flexible bonds to aluminum, wood, gelcoat, and fiberglass. It forms a watertight, weather-resistant seal above and below the waterline. It's flexibility allows for dissipation of stress caused by shock, vibration, swelling, or shrinking. This sealant is recommended for the following applications: fiberglass deck to hull, wood to fiberglass, portholes, deck fittings, rubrail attachment, sealing screwholes, and stanchion supports.
Features:
Medium strength marine bonding allows for disassembly
Formulated for fast cure, providing rapid results
Tack-free in 1 hour and typically cures in 24 hours
Above and below the water line applications
Flexible and durable adhesion withstand stress
Bonds to aluminum, wood, gelcoat and fiberglass
Color is white.
Caulking gun tube.
Click to Download 3M 4200 Marine Sealant Application Instructions
Frequently Asked Questions
- What is 3M 4200 Polyurethane Fast Cure Adhesive-Sealant 10oz White used for? 3M 4200 Polyurethane Fast Cure Adhesive-Sealant is a one-component, medium-strength marine sealant designed to create flexible, watertight bonds and seals. It can be used above and below the waterline for applications such as fiberglass deck-to-hull joints, wood-to-fiberglass bonding, portholes, deck fittings, rubrail attachment, screwholes, and stanchion supports.
- What materials does 3M 4200 Fast Cure Marine Sealant bond to? This polyurethane adhesive-sealant is formulated to bond to aluminum, wood, gelcoat, and fiberglass. Its flexible bond helps accommodate stress associated with shock, vibration, swelling, or shrinking while maintaining adhesion.
- Can 3M 4200 Fast Cure Marine Sealant be used above and below the waterline? Yes. 3M 4200 Fast Cure Marine Sealant is designed for watertight, weather-resistant sealing applications both above and below the waterline. The product description specifically lists marine applications including deck-to-hull joints, portholes, deck fittings, rubrails, screwholes, and stanchion supports.
- How quickly does 3M 4200 Fast Cure Marine Sealant cure? 3M 4200 Fast Cure Marine Sealant is formulated for a faster cure than a standard marine sealant. It becomes tack-free in approximately 1 hour and typically cures in 24 hours.
- Is 3M 4200 Fast Cure Marine Sealant a permanent adhesive? 3M 4200 Fast Cure Marine Sealant provides a medium-strength marine bond that allows for disassembly. Its flexible polyurethane formulation is designed to provide durable adhesion while accommodating stress from shock, vibration, swelling, or shrinking.
- How is 3M 4200 Fast Cure Marine Sealant packaged? This white 3M 4200 Fast Cure Marine Sealant comes in a 10-ounce caulking gun tube. The tube format is intended for application with a caulking gun.
From $41.19
3M 5200 Polyurethane Fast Cure Adhesive-Sealant
3M 5200 Polyurethane Fast Cure Adhesive Sealant is a one-component sealant designed to meet the high demands of the marine environment. 5200 Fast Cure provides strong watertight bonds and has permanent adhesion to wood, gelcoat, and fiberglass. 3M designed this sealant to be flexible, it allows for structural movement and dissipation of stress that may be caused by vibration, swelling, shrinking or shock.
5200 Fast Cure Sealant creates tough bonds above or below the waterline and is ideal for the following applications: fiberglass deck to hull, through hull fittings, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under moldings, hull seams above and below water line, and deck housing.
Faster curing version of 3M 5200.
Extremely strong and retains its strength above or below the waterline.
Stays flexible.
Watertight bonding/sealing of fiberglass, gelcoat and wood.
Best when NO Removal is anticipated.
Color is white.
Specifications:
Adhesive Type: Polyurethane
Application: Hand or pressure caulk
Tack-free Time: 1 Hour
3M 5200 Polyurethane Fast Cure Adhesive Sealant Application Information:
- Clean all surfaces before application. It is recommended to use an adhesive cleaner.
Cut the nozzle to desired bead size.
Puncture seal inside the threaded nozzle end and screw on nozzle.
Apply 3M 5200 Fast Cure to the seam or part to be bonded. Tool material to desired appearance.
Remove excess material with adhesive cleaner.
Frequently Asked Questions
- What is 3M 5200 Polyurethane Fast Cure Adhesive-Sealant used for? 3M 5200 Polyurethane Fast Cure Adhesive-Sealant is a one-component marine sealant designed to create strong, watertight bonds above or below the waterline. It can be used for applications such as fiberglass deck-to-hull joints, through-hull fittings, wood-to-fiberglass bonding, portholes, deck fittings, hull seams, and deck housings.
- What materials can 3M 5200 Fast Cure bond and seal? 3M 5200 Fast Cure provides permanent adhesion to wood, gelcoat, and fiberglass. It is formulated to remain flexible, allowing the bonded materials to accommodate movement and stress caused by vibration, swelling, shrinking, or shock while maintaining a watertight seal.
- Can 3M 5200 Fast Cure be used above and below the waterline? Yes. 3M 5200 Fast Cure is designed for strong, watertight bonding and sealing both above and below the waterline. The product description specifically lists applications including hull seams, through-hull fittings, and other marine components in these areas.
- Is 3M 5200 Fast Cure intended for applications where removal may be needed? 3M 5200 Fast Cure is best suited for applications where no removal is anticipated. It forms a permanent bond and is designed to retain its strength while remaining flexible in the marine environment.
- How should 3M 5200 Fast Cure Adhesive-Sealant be applied? Clean all surfaces before application, with an adhesive cleaner recommended. Cut the nozzle to the desired bead size, puncture the seal inside the threaded nozzle end, and attach the nozzle. Apply the sealant to the seam or parts being bonded and tool it to the desired appearance. Remove excess material with adhesive cleaner.
- How quickly does 3M 5200 Fast Cure become tack-free? 3M 5200 Polyurethane Fast Cure Adhesive-Sealant has a listed tack-free time of approximately 1 hour. The sealant is a one-component polyurethane product and can be applied by hand or with a pressure caulk application method.
From $33.89
3M Marine Adhesive Sealant 5200
3M's 5200 Adhesive Sealant is a one-part polyurethane used for permanent bonding. 5200 offers permanent adhesion to wood, gelcoat, and fiberglass, and forms watertight seals. Designed for the marine industry, this sealant forms bonds that are resistant to saltwater and weathering. This sealant is flexible, allowing for structural movement and dissipation of stress that may be caused by vibration, swelling, shrinking or shock. 3M 5200 achieves handling strength in 48 hours and has been trusted throughout the marine industry for over 50 years.
3M 5200 Adhesive Sealant is recommended for the following applications; fiberglass deck to hull, through hull fittings, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under moldings, hull seams above and below water line, and deck housing.
Features:
High performance, one-part polyurethane.
Extremely strong and retains its strength above or below the waterline.
Stays flexible.
Watertight bonding/sealing of fiberglass, gelcoat and wood.
Best when NO Removal is anticipated.
Specifications:
Adhesive Type: Polyurethane
Application Method: Hand or pressure caulk
Tack Free Time: 12 Hour, 48 Hour
Tensile Strength: 700 psi
3M 5200 Adhesive Sealant Application Information:
- Clean all surfaces before application. It is recommended to use an adhesive cleaner.
Cut the nozzle to desired bead size.
Puncture seal inside the threaded nozzle end and screw on nozzle.
Apply 3M 5200 to the seam or part to be bonded. Tool material to desired appearance.
Remove excess material with adhesive cleaner.
Frequently Asked Questions
- What is 3M Marine Adhesive Sealant 5200 used for? 3M Marine Adhesive Sealant 5200 is a one-part polyurethane designed for permanent bonding and watertight sealing of wood, gelcoat, and fiberglass. Recommended marine applications include fiberglass deck-to-hull joints, through-hull fittings, wood-to-fiberglass bonding, portholes, deck fittings, motors on fiberglass transoms, under moldings, hull seams, and deck housing.
- Can 3M 5200 Adhesive Sealant be used above and below the waterline? Yes. 3M 5200 Adhesive Sealant forms watertight bonds and retains its strength above or below the waterline. It is also resistant to saltwater and weathering, making it suitable for the marine applications specified in the product description.
- Is 3M 5200 Adhesive Sealant designed for permanent bonding? Yes. 3M 5200 is designed for permanent adhesion and is best suited for applications where removal is not anticipated. It provides strong bonds to wood, gelcoat, and fiberglass while remaining flexible to accommodate structural movement.
- How long does 3M Marine Adhesive Sealant 5200 take to reach handling strength? 3M 5200 Adhesive Sealant achieves handling strength in 48 hours. The listed specifications include a tack-free time of 12 hours and 48 hours.
- How do you apply 3M Marine Adhesive Sealant 5200? Clean all surfaces before application, using an adhesive cleaner as recommended. Cut the nozzle to the desired bead size, puncture the seal inside the threaded nozzle end, and attach the nozzle. Apply 3M 5200 to the seam or part, tool it to the desired appearance, and remove excess material with adhesive cleaner.
- What are the specifications of 3M 5200 Adhesive Sealant? 3M 5200 is a high-performance, one-part polyurethane adhesive sealant applied by hand or pressure caulk. It has a listed tensile strength of 700 psi and is formulated to remain flexible while providing watertight bonding and sealing of fiberglass, gelcoat, and wood.
Related collections
3M products currently published by All Marine World.
- Choosing a selection results in a full page refresh.
- Opens in a new window.