Attwood

Attwood All-Round Boat Stern Light w/ Fixed Base

This Attwood All-Round Boat Stern Light w/ Fixed Base features a two-mile, 360° light visibility with an included 9-watt wedge base lamp. It installs with required #10 fasteners and is great for use on pontoons, hard tops, and rader arches. Rated for 50,000+ hours of use, this boat stern light is for use on boats up to 39.4 ft. (12 meters) and provides exceptional satisfaction.

Features:

Rated For 50,000+ Hours Of Use

Two-Mile, 360° Light Visibility

For Use On Pontoons, Hard Tops, and Radar Arches

Installs With Two Required #10 Fasteners

Includes 9-Watt Wedge Base Lamp

For Use On Boats Up To 39.4 ft. (12 Meters)

Specifications:

Base Dimensions: 2-1/2" Long x 1" Wide

8" Tall

Click to download Attwood All-Round Boat Stern Light w/ Fixed Base Installation Instructions

Attwood Frosted Globe All-Round Boat Navigation Light

This Attwood Frosted Globe All-Round Boat Navigation Light uses a standardized lamp that is commonly available in marine, auto, and convenience stores. It provides a 2-mile 360 degree illumination for boats up to 65.6' (20m), with its clean and translucent lens. With a 9-watt wedge-base lamp, this boat navigation light offers a universal fit so it can be used with a wide variety of 2-pin straight or angled bases.

Features:

2-Pin Standard Pole

.75" Diameter

Fits All Attwood Standard 2-Pin Contact Bases

Clean, Translucent Lens

Provides A 2-Mile 360 Degree Illumination For Boats Up To 65.6' (20m)

Standardized Lamp

Includes 9-Watt Wedge-Base Lamp

Specifications:

Voltage: 12V

24"

Installation Tips:

• When installing, position the All-Round light so its bulb is not less than one meter above sidelights. If replacing an existing pole light, replace with a pole at least as long as the existing. Mount the light in a position that will allow the light to shine 360 degrees, unobstructed.
• Click to download Attwood 5100 Frosted Globe Boat Navigation Light Installation Instructions
• Frequently Asked Questions
• What is the Attwood Frosted Globe All-Round Boat Navigation Light designed for? The Attwood Frosted Globe All-Round Boat Navigation Light provides 360-degree illumination for boats up to 65.6 feet (20 meters) in length. It features a clean, translucent lens and a 24-inch pole with a 2-pin standard connection.
• What type of bulb does the Attwood Frosted Globe All-Round Boat Navigation Light use? This Attwood all-round navigation light uses a standardized 9-watt wedge-base lamp. The included lamp operates at 12V and is commonly available in marine, automotive, and convenience stores.
• Which bases are compatible with the Attwood Frosted Globe All-Round Boat Navigation Light? The Attwood Frosted Globe All-Round Boat Navigation Light fits all Attwood standard 2-pin contact bases. Its universal design also allows use with a wide variety of 2-pin straight or angled bases.
• How far can the Attwood Frosted Globe All-Round Boat Navigation Light be seen? The Attwood Frosted Globe All-Round Boat Navigation Light provides 2-mile, 360-degree illumination for boats up to 65.6 feet (20 meters) in length.
• What are the installation requirements for the Attwood Frosted Globe All-Round Boat Navigation Light? Position the all-round light so its bulb is at least one meter above the sidelights. If replacing an existing pole light, use a pole at least as long as the existing one. Mount the light where it can shine 360 degrees without obstruction.

Attwood Bi-Color Boat Navigation Light

This Attwood Bi-Color Boat Navigation Light is composed of anodized aluminum that raises the light head for visibility above the trolling motor, anchor, or other equipment on the bow. The 14" straight 2-pin locking collar pole offers a "universal fit" so it can be used with a wide variety of Attwood 2-pin and 3-pin straight or angled bases. This boat navigation light is designed for boats up to 38.4 ft. (12 meters) with its 1-mile 225° red/green light visibility. When not in use, the lights can be removed from the base and stowed to prevent interference with fishing or anchoring.

Features:

Composed Of Anodized Aluminum

1-Mile, 225° Red/Green Light Visibility

14" Straight 2-Pin Locking Collar Pole Offers A "Universal Fit"

For Boats Up To 38.4 ft. (12 Meters)

Raises The Light Head For Visibility Above The Trolling Motor, Anchor, Or Other Equipment On The Bow

Available In Straight Or Angled Pole

Includes 8-Watt Wedge Base Lamp

Can Be Removed From Base and Stowed

Specifications:

Length: 14"

Visibility: 1-Mile, 225°

Locking Collar: 2-Pin

Attwood Pulsar 14" Angled Bi-Color Navigation Side Lights

The Pulsar series combo sidelights feature an anodized aluminum pole and dual 9W wedge base lamp. This durable stowaway bi-color lights are designed for bow mounting and provide 225° of light up to 1 nautical mile in distance. When not in use this navigation light can be removed from its base to not interfere with fishing or anchoring. This combo sidelight is designed for boats up to 39.4' in length.

Product Features:

1 Nautical Mile Visibility

2-Pin Standard

12° Angled 14" Post

Anodized Aluminum Construction

9W Wedge Base Lamp

Attwood Sure Grip Clamp-On Rail Mounting Base

Attwood Sure Grip Clamp-On Rail Mounting Base

Features:

Constructed from extruded aluminum.

This base clamps onto a round rail that is up to 7/8" diameter.

Attwood 25° "Sure Grip" Steel Rod Holders

Attwood’s lines of “Sure Grip” Steel Rod Holders are the perfect complement to our model Pro-Series and Heavy-Duty Adjustable rod holders. They designed for drift fishing, pan fishing, crappie, and more.

This holder keeps the rod tip at a higher angle for drifting or trolling. The 3/8"-diameter coated steel rod is tough, strong, and corrosion-resistant. U.V.-resistant plastic coating protects the rod butt and handle. And the exposed stem and wing nut are stainless steel for years of corrosion-resistant use.

Includes 5071 mounting base.

4" Stem for Drifting, Trolling

Attwood Bi-Color Navigation Light

This Attwood Bi-Color side navigation light features a red and green lens sitting in a black housing. The housing is made of an impact resistant and UV stable polycarbonate material. Constructed to provide 225° of visibility up to 1 nautical mile. The bayonet lock design allows this light to securely sit in the base. A 7" wire lead connects to a 12V DC power supply. The light installs directly to the deck with two #10 fasteners. When properly installed the cover and lens conceal all signs of installation and seal water out of the lamp and hull. This bi-color navigation light is designed for use on bow of boats up to 39.4ft.

Sidelights should be mounted to a smooth surface on the gunwale, deck, or superstructure where the light beam will not be obstructed.

Product Features:

For Boats up to 39.4'

Impact Resistant Housing

1 Nautical Mile 225° Visibility

Bi-Color Lens

Attwood Port Side Navigation Light

This Attwood side navigation light features a red lens sitting in a black housing. The housing is made of an impact resistant and UV stable polycarbonate material. Constructed to provide 112.5° of visibility up to 1 nautical mile. The bayonet lock design allows this light to securely sit in the base. A 7" wire lead connects to a 12V DC power supply. The light installs directly to the deck with two #10 fasteners. When properly installed the cover and lens conceal all signs of installation and seal water out of the lamp and hull. This navigation light is designed for use on the port (left side) of boats up to 39.4ft.

Sidelights should be mounted to a smooth surface on the gunwale, deck, or superstructure where the light beam will not be obstructed.

Product Features:

For Boats up to 39.4'

Impact Resistant Housing

1 Nautical Mile 112.5° Visibility

Red Lens

Port/Left Side Light

Attwood Starboard Side Navigation Light

This Attwood side navigation light features a green lens sitting in a black housing. The housing is made of an impact resistant and UV stable polycarbonate material. Constructed to provide 112.5° of visibility up to 1 nautical mile. The bayonet lock design allows this light to securely sit in the base. A 7" wire lead connects to a 12V DC power supply. The light installs directly to the deck with two #10 fasteners. When properly installed the cover and lens conceal all signs of installation and seal water out of the lamp and hull. This navigation light is designed for use on the starboard (right side) of boats up to 39.4ft.

Sidelights should be mounted to a smooth surface on the gunwale, deck, or superstructure where the light beam will not be obstructed.

Product Features:

For Boats up to 39.4'

Impact Resistant Housing

1 Nautical Mile 112.5° Visibility

Green Lens

Starboard/Right Side Light

Pro Series Flush Mount Bases

Convenient, interchangeable mounting bases are a hallmark of the Pro-Series, "2-In-1", and Mini Rigger systems. This base provides 360° lift-and-turn horizontal adjustment and fail-safe retention. The locking keyway prevents removal of a rod holder or Mini Rigger until it is turned directly inboard.

Flush Mount Base mounts to gunwale or deck. Easy-open cover conceals fasteners, and elastomeric liner seals water out. When closed, the low-profile, contoured design avoids snagging line.

Black

3 Year Warranty

Heavy-Duty Rod Holder Extension

Increase your odds with easier access to your rod and reel. Extends the height of the rod holder by 6”, allowing for faster access when that fish strikes. Made from super tough glass filled nylon.

For use with all Attwood mounts including the Combo Mount, Attwood standard side mounts, and other leading rod holder mounts. Complete with all necessary hardware to mount to round square 7/8" to 1-1/4" diameter rail.

3 Year Warranty

Attwood Pro Series Rail Mount Adapter

Attwood Pro Series Rail Mount Adapter- Black

For use with the Attwood Combo Mount rod holders. Complete with all necessary hardware to mount to rails from 3/4" to 1 1/4" in width.

The Combo Mount allows for mounting in rod holders in multiple configurations. This new design offers an improved fit with positive lock for secure rod holder mounting. Can be mounted on side or top of gunwale. Compatible with all Attwood and other leading rod holder mounting patterns.3 Year Warranty

Attwood Marine Heavy Duty Pro Series Rod Holder

The new Pro Series line of molded rod holders takes the Pro Series to the next level with the addition of the Combo Mount. All the Pro-Series unique, patented features you’ve come to expect, with the ability to mount in multiple configurations.

Designed for use with casting and spinning rod holders. Heavy-duty, deep-tooth gear lock securely holds rod holder in mounting base.

5-Year Warranty

ROD HOLDER W/SIDE MOUNT- White

Attwood Heavy Duty Adjustable Rod Holder with Combo Mount

The Attwood Heavy Duty Adjustable Rod Holder is a versatile and durable rod holder for bait casting and spinning reels. This rod holder is constructed of a high strength material that is stronger and more durable than the competition. Its dual action locking ring allows fast single hook setting and rod removal without causing any line slack. A 180 degree vertical adjustment range allows for a variety of rod tip height settings. This heavy duty rod holder comes complete with a combo mount.

The Combo Mount provides 360 degrees of horizontal adjustment and can be used as a side or pedestal mount. The locking keyway will not allow the rod holder to be removed until turned directly inward, preventing accidental removal.

Features:

Designed for use with bait casting and spinning reels

Durable, ergonomic design

180 degree vertical adjustment range

Includes combo mount

3 Year warranty

Attwood Heavy-Duty 1700 GPH Bilge Pump

Heavy-Duty Bilge Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.The perfect upgrade from 1500 GPH rated pumps especially older and over-rated designs. Easily replaces 2000 GPH rated pumps. Delivers a true 1700 GPH at open flow while drawing less than 6-amps.

Product Specifications:

12V

CE Rated

5.7A Fuse

Wire Length: 36"

Anti-Airlock nozzle

1700GPH @ 0' head

Attwood Automatic Bilge Pump Float Switch

This Attwood Automatic Bilge Pump Float Switch features an integral cover that dampens bilge sloshing to reduce pump cycling and prevent debris interference. With a compact, low profile design, it mounts on any surface from a horizontal angle up to a 24° angle. Featuring a sealed switch mechanism, this bilge pump float switch will resist electrical shock, moisture, and fume-ignition.

Features:

Compact, Low Profile Design

No Large Voltage Drop Which Reduces Bilge Pump Output

Wire Leads Do Not Flex Or Hinge With The Float

Incorporates A Reliable and Affordable Mechanical Switch That Actuates Pump Motor At 2” Water Level

Actuates Pump At 2" Water Level

Sealed Switch Mechanism Resists Moisture, Fume-Ignition, and Electrical Shock

Mounts On Any Surface From A Horizontal Angle Up To A 24° Angle

Integral Cover Dampens Bilge Sloshing To Reduce Pump Cycling, and Prevents Debris Interference

Contains No Mercury, Which Is Listed As A Health Hazard and “Persistent Toxic Substance” In Over 26 States

Designed To Be Used With 12-Volt or 24-Volt Bilge Pumps and Other Accessories

Converts Bilge Pumps To Fully Automatic Operation

Maximum Amp Draw Is 12 Amps (At 12-Volt D.C.) Or 6-Amps (At 24-Volts D.C.)

Attwood Marine Bilge Pump Float Switch w/ Cover

This Attwood Marine Bilge Pump Float Switch w/ Cover features a compact, low profile design that mounts on any surface from a horizontal angle up to a 24° angle. The integral cover dampens bilge sloshing to reduce pump cycling and prevent debris interference. With a sealed switch mechanism, this bilge pump float switch resists moisture, fume-ignition and electrical shock.

Features:

Compact, Low Profile Design

Mounts On Any Surface From A Horizontal Angle Up To A 24° Angle

Converts Bilge Pumps To Fully Automatic Operation

Integral Cover Dampens Bilge Sloshing To Reduce Pump Cycling, and Prevents Debris Interference

Incorporates A Reliable and Affordable Mechanical Switch That Actuates Pump Motor At 2” Water Level

Contains No Mercury, Which Is Listed As A Health Hazard and “Persistent Toxic Substance” In Over 26 States

Wire Leads Do Not Flex Or Hinge With The Float

Sealed Switch Mechanism Resists Moisture, Fume-Ignition, and Electrical Shock

Maximum Amp Draw Is 12 Amps (At 12-Volt D.C.) Or 6-Amps (At 24-Volts D.C.)

Specifications:

Rated: 12-Volt/24-Volt, CE-Rated

Wire/Connector: 36in Wire

Attwood Waterbuster Battery Operated Portable Water Pump

This submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe, too, because it needs no electrical cord – runs up to 5 hours on three alkaline D batteries. Excellent for use as a portable pump-out device for paddle boats, inflatables, duck boats, dingies and kayaks. Any craft that lacks a hard-wire, permanent electrical system. The Attwood Waterbuster is made of high-impact plastic and comes complete with a 42" hose and a male hose fitting.

6-3/8" high x 5-1/4"

Pumps up to 200 gallons per hour.

Includes 42" hose with garden-hose adapter for adding longer hose.

Lifts water to height of 40".

Note: Not to be used as a permanent bilge pump.

Click to Download Attwood WaterBuster Installation Instructions

Attwood Marine Aerator Spray Head

Use on livewells that have built-in overflows or recirculating systems. Mounts on side of tank. 90° fitting for installation in tight spaces. Rotating head with O-ring adjusts and maintains flow setting. Removable head has an "interference-fit thread design" that will not allow it to vibrate or blow out. Polypropylene construction. Can be installed on tanks with up to 5/8" wall thickness.

Attwood Marine Aerator Remote Mounting Bracket

For mounting the aerator pump to a base, away from the transom.

Attwood Tsunami Mk2 Bilge Pump Installation Kit

This kit contains all you need to install your Tsunami Mk2 manual bilge pump with a 3/4" I.D. hose outlet.

Includes:

3/4" O.D. Thru-Hull Connector

5' of 3/4" I.D. hose

2 Hose Clamps

20' 16-Gauge Wire

On/Off Control Switch w/Face Plate

In-Line Fuse Holder

3Amp Fuse