Attwood

Attwood Replacement Stern Light Frosted Globe

This replacement stern light frosted globe is designed as an easy way to replace a broken or discolored globe stern light.

Attwood Marine 90° P-Trap Vent

The P-traps have been tested and certified by a third party lab to meet the ABYC weathertight and watertight requirements and ensure no liquid water will reach a fuel vent line, carbon canister or fuel tank. The 1670/1671/1674 P-traps allow air to vent freely during normal sea conditions and washdowns and meet the ISO 10088 requirement for minimum venting area. For 5/8" I.D. hose. Meets ABYC Standard.

Cover can be removed for vent inspection, debris removal and fuel system pressure testing.

Certified by third party laboratory to meet ABYC H-24 watertight and weathertight specification.

Specifications:

Hull Thickness: 1/4" - 9/16"

Surface Mount

Installation Hole: 3/4"

Vent Hose: 5/8"

Attwood 66400-3 Stainless Steel Clam Shell Vent

This clam shell vent is designed to provide a seal and offer splash protection for vent holes as well as wire and hose openings. This Clamshell vent cover holes up to 1-1/2" in diameter and hose or wire up to 9/16" in diameter. Constructed from stainless steel this vent boasts durability and corrosion resistance. This vent cover has 3 mounting holes that require #6 fasteners (not included). These clamshell vents are sold in pairs of 2.

Product Specifications:

2-3/16" Width

2-1/4" L

9/16" H

Attwood Stainless Steel Tethered 1-4" Pull Pin

For use with Attwood deck or rail mounted bimini top hinge fittings that use removable 1/4" spring-loaded clevis pins. This handy 1/4" spring-load clevis pin with lanyard allows the pin to be tethered to prevent loss of the pin when it is removed from the bimini top deck or rail hinge fitting. Use With these Attwood Deck or Rail Hinges: 66160, 66200, 66220, 66383

Frequently Asked Questions

• What is the Attwood Stainless Steel Tethered 1/4" Pull Pin used for? The Attwood Stainless Steel Tethered 1/4" Pull Pin is designed for Attwood deck or rail mounted bimini top hinge fittings that use removable 1/4" spring-loaded clevis pins. Its lanyard keeps the pin tethered to help prevent it from being lost when removed.
• What size pull pin is included? This Attwood pull pin is a 1/4" spring-loaded clevis pin with a lanyard. The tethered design helps keep the removable pin connected to the bimini top hinge fitting when the pin is taken out.
• Which Attwood bimini top hinges are compatible with this pull pin? The Attwood Stainless Steel Tethered 1/4" Pull Pin is specified for use with Attwood deck or rail hinges numbered 66160, 66200, 66220, and 66383. Verify your hinge part number before selecting this replacement pin.
• Why does this bimini top pull pin have a lanyard? The lanyard tethers the 1/4" spring-loaded clevis pin to help prevent loss when the pin is removed from an Attwood bimini top deck or rail hinge fitting.

Attwood Replacement Gas Cap And Chain Stainless Steel

Replacement Cap for gas, diesel and water hose deck fills. For 1-1/4" straight pipe threads. Highly polished finish. Flush cap is slotted for separate key and features an O-ring that seals the cap watertight. Cap is attached by a stainless steel beaded chain. Key sold separately. For Attwood (66406,66407,66408,66126,66171,66172,66173) Note: Requires a bonding wire to prevent sparking when nozzle is inserted on gas model.

Frequently Asked Questions

• What is the Attwood Replacement Gas Cap And Chain Stainless Steel used for? The Attwood Replacement Gas Cap And Chain Stainless Steel is a replacement cap for gas, diesel, and water hose deck fills. It is designed for 1-1/4-inch straight pipe threads and features a highly polished finish, watertight O-ring seal, and stainless steel beaded chain.
• What size threads does the Attwood Replacement Gas Cap And Chain fit? The Attwood Replacement Gas Cap And Chain Stainless Steel is designed for 1-1/4-inch straight pipe threads. Verify the existing deck fill thread size before selecting this replacement cap.
• Does the Attwood Replacement Gas Cap And Chain include a key? No. The flush cap is slotted for a separate key, but the key is sold separately. The cap includes an O-ring for a watertight seal and a stainless steel beaded chain to keep the cap attached.
• What is the Attwood Replacement Gas Cap And Chain made from? The Attwood Replacement Gas Cap And Chain Stainless Steel has a stainless steel construction with a highly polished finish. The cap also includes an O-ring that seals the cap watertight.
• Which Attwood deck fills is this replacement gas cap compatible with? The Attwood Replacement Gas Cap And Chain is listed for Attwood deck fills 66406, 66407, 66408, 66126, 66171, 66172, and 66173.
• Does the Attwood Replacement Gas Cap And Chain require a bonding wire? For the gas model, the product description states that a bonding wire is required to prevent sparking when the fuel nozzle is inserted. Verify the applicable installation requirements for your deck fill before use.

Attwood LED Docking Lights

These Attwood docking lights feature ultra bright LED lights that cast light in a 120° beam. Ideal for docking, spotting dock cleats, and safely traversing the dock at night these lights produce super bright light while remaining cool to touch. Constructed from high grade stainless steel housing with a black powder coat for outstanding corrosion resistance in marine environments. All electrical components are fully sealed to ensure the light is completely watertight. Less than 1" thick these lights are intended to be mounted directly to the surface of the hull with only a small hole for the 4" lead wires. Each light requires 5W at 12VDC, a fraction of the power required by other lights.

Product Features:

Bright LED Lights

Sold in Pair

4" Lead Wires

Easy to Install

Black Powder Coat

Watertight

120° Light Beam

Attwood Stainless LED Docking Lights

These Attwood docking lights feature ultra bright LED lights that cast light in a 120° beam. Ideal for docking, spotting dock cleats, and safely traversing the dock at night these lights produce super bright light while remaining cool to touch. Constructed from high grade stainless steel housing with aluminum components for outstanding corrosion resistance in marine environments. All electrical components are fully sealed to ensure the light is completely watertight. Less than 1" thick these lights are intended to be mounted directly to the surface of the hull with only a small hole for the 4" lead wires. Each light requires 5W at 12VDC, a fraction of the power required by other lights.

Product Features:

Bright LED Lights

4" Lead Wires

Sold in Pair

Easy to Install

Watertight

120° Light Beam

Attwood Vertical Boat Transom Navigation Light w/ Flush Mount

This Attwood Vertical Boat Transom Navigation Light w/ Flush Mount features a translucent body made up of 304 stainless steel with a plastic body and watertight lamp socket. It provides 2-mile, 135 degree transom visibility and includes one 7.5-watt lamp and two stainless steel #10 screws. Designed for pleasure craft up to 164 ft. (50 meters) in length, this boat transom navigation light features a rubber gasket that seals the lens and body to the mounting surface.

Features:

304 Stainless Steel With A Plastic Body and Watertight Lamp Socket

Translucent Body

Rubber Gasket Seals Lens and Body To Mounting Surface

Provides 2-Mile, 135 Degree Transom Visibility

Includes One 7.5-Watt Lamp and Two Stainless Steel #10 Screws

For Pleasure Craft Up To 164 ft. (50 Meters) In Length

Meets USCG CFR 183.810, ABYC A-16 Requirements, and All Applicable Standards

Specifications:

3" Diameter

Click to Download Attwood 6356D7 Installation Instructions

Attwood 4" LED Utility Light

This Attwood utility light is 4" long and features six ultra bright white LED's. The 12V cabin light is ideal for marine environments boasting water resistance and a low power draw. This easy to install boat light features a surface mount design and comes with the required hardware for installation.

Product Features:

6 Ultra Bright White LEDs

Water Resistant

Low Power Draw

Surface Mount Design

Attwood Tsunami Mk2 800 GPH Manual Bilge Pump

The Tsunami Mk2 is the most reliable Manual bilge pumps Attwood has ever designed. The patented X-Air impeller is engineered to to force air bubbles trapped in the hose and underside the pump out of the pipework. This prevents the pump from running dry which can damage the bilge pump. This pump is suitable for freshwater applications.

Easy to install, the Tsunami Mk2 features external mounting feet which means you don't have to remove the basket when changing the cartridge. A universal mounting pattern makes replacement a breeze across all OEM's. The single-hand cartridge release makes it convenient to remove the bilge pump in hard to reach areas. The, included, 90° outlet features full 360° rotation so you can mount the pump in any location or orientation.

Included:

Tsunami Mk2 Manual Bilge Pump

90° Outlet

0° Outlet

Washer

Non-Return Valve

Product Features:

X-Air Impeller

Freshwater Applicable

Easy Installation

Universal Mounting Pattern

External Mounting Feet

One-Hand Cartridge Clip

Product Specifications:

12V

5A Fuse

Check Valve

Wire Length: 29"

800GPH @ 0' head

Click here for Attwood Tsunami Mk2 Manual Bilge Pump Technical Datasheet

Attwood Tsunami Mk2 500 GPH Manual Bilge Pump

The Tsunami Mk2 is the most reliable Manual bilge pumps Attwood has ever designed. The patented X-Air impeller is engineered to to force air bubbles trapped in the hose and underside the pump out of the pipework. This prevents the pump from running dry which can damage the bilge pump. This pump is suitable for freshwater applications.

Easy to install, the Tsunami Mk2 features external mounting feet which means you don't have to remove the basket when changing the cartridge. A universal mounting pattern makes replacement a breeze across all OEM's. The single-hand cartridge release makes it convenient to remove the bilge pump in hard to reach areas. The, included, 90° outlet features full 360° rotation so you can mount the pump in any location or orientation.

Included:

Tsunami Mk2 Manual Bilge Pump

90° Outlet

0° Outlet

Washer

Non-Return Valve

Product Features:

X-Air Impeller

Freshwater Applicable

Easy Installation

Universal Mounting Pattern

External Mounting Feet

One-Hand Cartridge Clip

Product Specifications:

12V

3A Fuse

Check Valve

Wire Length: 29"

500GPH @ 0' head

Click here for Attwood Tsunami Mk2 Manual Bilge Pump Technical Datasheet

Frequently Asked Questions

• What is the Attwood Tsunami Mk2 500 GPH Manual Bilge Pump designed for? The Attwood Tsunami Mk2 500 GPH Manual Bilge Pump is designed for freshwater bilge applications. Its patented X-Air impeller helps force trapped air bubbles out of the hose and underside of the pump, helping prevent the pump from running dry. The pump operates at 12V and is rated at 500 GPH at 0 feet of head.
• What is the purpose of the X-Air impeller in the Attwood Tsunami Mk2 Bilge Pump? The X-Air impeller is engineered to force air bubbles trapped in the hose and beneath the pump out of the pipework. According to the product description, this helps prevent the bilge pump from running dry, which can damage the pump.
• What outlets are included with the Attwood Tsunami Mk2 500 GPH Manual Bilge Pump? The Attwood Tsunami Mk2 includes both a 90° outlet and a 0° outlet. The included 90° outlet can rotate through 360°, allowing the pump to be mounted in different locations or orientations. A washer and non-return valve are also included with the pump.
• How easy is the Attwood Tsunami Mk2 Bilge Pump to remove for maintenance? The Tsunami Mk2 features external mounting feet, so the basket does not need to be removed when changing the cartridge. Its one-hand cartridge clip also allows the pump to be removed conveniently, including from hard-to-reach areas.
• Does the Attwood Tsunami Mk2 500 GPH Bilge Pump use a universal mounting pattern? Yes. The Attwood Tsunami Mk2 features a universal mounting pattern designed to make replacement easier across different OEM applications. The pump also includes external mounting feet and an easy-to-use cartridge release for installation and removal.
• What are the electrical specifications of the Attwood Tsunami Mk2 500 GPH Manual Bilge Pump? The Attwood Tsunami Mk2 operates at 12V and uses a 3A fuse. It has a 29-inch wire length and includes a check valve. The pump is rated at 500 GPH at 0 feet of head and is specified for freshwater applications.

Attwood LightArmor All-Round Navigation Light

Designed for installation on wakeboard tower, radar arch, hard top, poling platform, tuna tower or other fixed structure. Direct LED replacement for Attwood's incandescent 5940 series. For pleasure craft up to 39.4 ft (12m).

1.8 watts watt draw at 12VDC - the lowest power draw of any two-mile all-round light on the market today

Two-mile, 360° visibility

Fully sealed electronics

Tab release

2 1/4" W x 2"H

Attwood Sahara Mk2 1200 GPH Automatic Bilge Pump

The Sahara Mk2 is the most reliable automatic bilge pumps Attwood has ever designed. The patented X-Air impeller is engineered to to force air bubbles trapped in the hose and underside the pump out of the pipework. This prevents the pump from running dry which can damage the bilge pump. The SteadySwitch is designed with buoyancy control, this helps reduce cycling and extends the bilge pumps working life. This pump is designed for both fresh and saltwater applications.

Easy to install, the Sahara Mk2 features external mounting feet which means you don't have to remove the basket when changing the cartridge. A universal mounting pattern makes replacement a breeze across all OEM's. The single-hand cartridge release makes it convenient to remove the bilge pump in hard to reach areas. The, included, 90° outlet features full 360° rotation so you can mount the pump in any location or orientation.

Included:

Sahara Mk2 Automatic Bilge Pump

90° Outlet

0° Outlet

Washer

Non-Return Valve

Product Features:

X-Air Impeller

Fresh/Saltwater Applicable

Attwood SteadySwitch

Easy Installation

Universal Mounting Pattern

External Mounting Feet

One-Hand Cartridge Clip

Product Specifications:

12V

5A Fuse

Check Valve

Wire Length: 29-1/2"

1200GPH @ 0' head

Click here for Attwood Sahara Mk2 Automatic Bilge Pump Technical Datasheet

Frequently Asked Questions

• What is the Attwood Sahara Mk2 1200 GPH Automatic Bilge Pump designed for? The Attwood Sahara Mk2 1200 GPH Automatic Bilge Pump is designed for both freshwater and saltwater bilge applications. It operates at 12V and is rated at 1200 GPH at 0 feet of head. The pump uses an Attwood SteadySwitch with buoyancy control to help reduce cycling.
• How does the X-Air impeller work in the Attwood Sahara Mk2 Bilge Pump? The patented X-Air impeller is engineered to force air bubbles trapped in the hose and underneath the pump out of the pipework. This helps prevent the bilge pump from running dry, which the product description states can damage the pump.
• What is the Attwood SteadySwitch on the Sahara Mk2 Automatic Bilge Pump? The Attwood SteadySwitch is designed with buoyancy control to help reduce cycling of the Sahara Mk2 Automatic Bilge Pump. The product description states that reducing cycling helps extend the bilge pump's working life.
• What outlets and components are included with the Attwood Sahara Mk2 1200 GPH Bilge Pump? The Attwood Sahara Mk2 includes the automatic bilge pump, a 90° outlet, a 0° outlet, a washer, and a non-return valve. The included 90° outlet provides full 360° rotation, allowing flexibility when mounting the pump in different locations or orientations.
• How is the Attwood Sahara Mk2 Bilge Pump designed for easy installation and maintenance? The Sahara Mk2 features external mounting feet, so the basket does not need to be removed when changing the cartridge. A one-hand cartridge clip makes pump removal convenient in hard-to-reach areas, while the universal mounting pattern is designed to make replacement easier across OEM applications.
• What are the electrical specifications of the Attwood Sahara Mk2 1200 GPH Automatic Bilge Pump? The Attwood Sahara Mk2 operates at 12V and uses a 5A fuse. It has a 29-1/2-inch wire length and includes a check valve. The pump is rated at 1200 GPH at 0 feet of head and is designed for both freshwater and saltwater applications.

Attwood Sahara Mk2 800 GPH Automatic Bilge Pump

The Sahara Mk2 is the most reliable automatic bilge pumps Attwood has ever designed. The patented X-Air impeller is engineered to to force air bubbles trapped in the hose and underside the pump out of the pipework. This prevents the pump from running dry which can damage the bilge pump. The SteadySwitch is designed with buoyancy control, this helps reduce cycling and extends the bilge pumps working life. This pump is designed for both fresh and saltwater applications.

Easy to install, the Sahara Mk2 features external mounting feet which means you don't have to remove the basket when changing the cartridge. A universal mounting pattern makes replacement a breeze across all OEM's. The single-hand cartridge release makes it convenient to remove the bilge pump in hard to reach areas. The, included, 90° outlet features full 360° rotation so you can mount the pump in any location or orientation.

Included:

Sahara Mk2 Automatic Bilge Pump

90° Outlet

0° Outlet

Washer

Non-Return Valve

Product Features:

X-Air Impeller

Fresh/Saltwater Applicable

Attwood SteadySwitch

Easy Installation

Universal Mounting Pattern

External Mounting Feet

One-Hand Cartridge Clip

Product Specifications:

12V

4A Fuse

Check Valve

Wire Length: 29-1/2"

800GPH @ 0' head

Click here for Attwood Sahara Mk2 Automatic Bilge Pump Technical Datasheet

Frequently Asked Questions

• What is the Attwood Sahara Mk2 800 GPH Automatic Bilge Pump designed for? The Attwood Sahara Mk2 800 GPH Automatic Bilge Pump is designed for both freshwater and saltwater bilge applications. It operates at 12V and is rated at 800 GPH at 0 feet of head. The pump uses an Attwood SteadySwitch with buoyancy control to help reduce cycling.
• How does the X-Air impeller work in the Attwood Sahara Mk2 Bilge Pump? The patented X-Air impeller is engineered to force air bubbles trapped in the hose and underneath the pump out of the pipework. This helps prevent the bilge pump from running dry, which the product description states can damage the pump.
• What is the Attwood SteadySwitch on the Sahara Mk2 Automatic Bilge Pump? The Attwood SteadySwitch is designed with buoyancy control to help reduce cycling of the Sahara Mk2 Automatic Bilge Pump. The product description states that reducing cycling helps extend the bilge pump's working life.
• What outlets and components are included with the Attwood Sahara Mk2 800 GPH Bilge Pump? The Attwood Sahara Mk2 includes the automatic bilge pump, a 90° outlet, a 0° outlet, a washer, and a non-return valve. The included 90° outlet provides full 360° rotation, allowing flexibility when mounting the pump in different locations or orientations.
• How is the Attwood Sahara Mk2 Bilge Pump designed for easy installation and maintenance? The Sahara Mk2 features external mounting feet, so the basket does not need to be removed when changing the cartridge. A one-hand cartridge clip makes pump removal convenient in hard-to-reach areas, while the universal mounting pattern is designed to make replacement easier across OEM applications.
• What are the electrical specifications of the Attwood Sahara Mk2 800 GPH Automatic Bilge Pump? The Attwood Sahara Mk2 operates at 12V and uses a 4A fuse. It has a 29-1/2-inch wire length and includes a check valve. The pump is rated at 800 GPH at 0 feet of head and is designed for both freshwater and saltwater applications.

Attwood Sahara Mk2 500 GPH Automatic Bilge Pump

The Sahara Mk2 is the most reliable automatic bilge pumps Attwood has ever designed. The patented X-Air impeller is engineered to to force air bubbles trapped in the hose and underside the pump out of the pipework. This prevents the pump from running dry which can damage the bilge pump. The SteadySwitch is designed with buoyancy control, this helps reduce cycling and extends the bilge pumps working life. This pump is designed for both fresh and saltwater applications.

Easy to install, the Sahara Mk2 features external mounting feet which means you don't have to remove the basket when changing the cartridge. A universal mounting pattern makes replacement a breeze across all OEM's. The single-hand cartridge release makes it convenient to remove the bilge pump in hard to reach areas. The, included, 90° outlet features full 360° rotation so you can mount the pump in any location or orientation.

Included:

Sahara Mk2 Automatic Bilge Pump

90° Outlet

0° Outlet

Washer

Non-Return Valve

Product Features:

X-Air Impeller

Fresh/Saltwater Applicable

Attwood SteadySwitch

Easy Installation

Universal Mounting Pattern

External Mounting Feet

One-Hand Cartridge Clip

Product Specifications:

12V

3A Fuse

Check Valve

Wire Length: 29-1/2"

500GPH @ 0' head

Click here for Attwood Sahara Mk2 Automatic Bilge Pump Technical Datasheet

Frequently Asked Questions

• What is the Attwood Sahara Mk2 500 GPH Automatic Bilge Pump designed for? The Attwood Sahara Mk2 500 GPH Automatic Bilge Pump is designed for both freshwater and saltwater bilge applications. It operates at 12V and is rated at 500 GPH at 0 feet of head. The automatic pump uses an Attwood SteadySwitch with buoyancy control to help reduce cycling.
• How does the X-Air impeller work in the Attwood Sahara Mk2 Bilge Pump? The patented X-Air impeller is engineered to force air bubbles trapped in the hose and underneath the pump out of the pipework. This helps prevent the bilge pump from running dry, which the product description states can damage the pump.
• What is the Attwood SteadySwitch on the Sahara Mk2 Automatic Bilge Pump? The Attwood SteadySwitch is designed with buoyancy control to help reduce cycling of the Sahara Mk2 Automatic Bilge Pump. The product description states that reducing cycling helps extend the bilge pump's working life.
• What outlets and components are included with the Attwood Sahara Mk2 500 GPH Bilge Pump? The Attwood Sahara Mk2 includes the automatic bilge pump, a 90° outlet, a 0° outlet, a washer, and a non-return valve. The included 90° outlet provides full 360° rotation, allowing flexibility when mounting the pump in different locations or orientations.
• How is the Attwood Sahara Mk2 Bilge Pump designed for easy installation and maintenance? The Sahara Mk2 features external mounting feet, so the basket does not need to be removed when changing the cartridge. A one-hand cartridge clip makes pump removal convenient in hard-to-reach areas, while the universal mounting pattern is designed to make replacement easier across OEM applications.
• What are the electrical specifications of the Attwood Sahara Mk2 500 GPH Automatic Bilge Pump? The Attwood Sahara Mk2 operates at 12V and uses a 3A fuse. It has a 29-1/2-inch wire length and includes a check valve. The pump is rated at 500 GPH at 0 feet of head and is designed for both freshwater and saltwater applications.

Attwood Folding All-Round Anti-Glare Boat Navigation Light

This Attwood Folding Anti-Glare Boat Navigation Light is built to last in the harsh marine environments with its non-corrosive materials and glass-filled polymer bases. It features a fold-down base that allows the light to swing 180° and can be mounted on both horizontal and vertical mounts. All of the wiring is concealed and protected within the pivoting base. In extreme conditions, if a 12ft./lb. force hits the base, the cam lock releases and allows base to swing down, reducing the chance of breakage to the base or pole. With a two mile, 360° light visibility, this anti-glare boat navigation light is for use on boats up to 39.4 ft.

Features:

Fold-Down Base That Allows The Light To Swing 180°

All Wiring Is Concealed and Protected Within The Pivoting Base

Has Two Mile, 360° Visibility

For Use On Boats Up To 39.4 ft.

Comes With A 12" Black Plastic Pole

Built To Last In Harsh Marine Environments

Can Be Mounted On Both Horizontal and Vertical Mounts

Non-Corrosive Materials

Glass-Filled Polymer Base

Includes a 9-Watt Wedge Base Lamp

Includes Mounts

Specifications:

Visibility: Two Mile, 360° Visibility

Installation Instructions

HOW TO INSTALL ATTWOOD FOLDING ALL-ROUND ANTI-GLARE LIGHT

Installation

Choose a position near the transom that is accessible to wiring and has clearance below deck.

Place base on the gunwale or deck. At desired location, be sure there I room to rotate the cover. Mark position for the 1-3/8” socket hole.

Remove base and drill the 1-3/8” diameter socket hole, being careful not to crack the gel coat finish around the hole.

Fit base into socket hole so it is parallel to boat centerline. Mark position and drill the three screw holes.

Remove base and connect wires through socket hole. Connect one wire to the battery ground (-). Attach other wire to the 1-amp fused, positive (+) switched wire from the navigation light switch.

Apply sealant between deck and light base. Fasten base with three #10 stainless steel screws. Do not overtighten screws.

Replacing Light Poles without a Locking Collar

Align pole screw with slot in the existing base. Insert pole into base.

Press down firmly to engage electrical connectors.

To remove pole, pull straight up.

Replacing Light Poles with Locking Collar

Align pole screw with slot in the base. Insert pole into base.

Press down firmly to engage electrical connectors.

Slide locking collar down to base, rotate until you can insert lower ring inside top of base.

Press collar down into base and rotate until it tightens between pole and base.

To remove light, rotate locking collar in opposite direction until it loosens, then pull up on pole.

Removing Locking Collar

For bases that do not accept locking collar, remove screw at bottom of pole. Slide locking collar off end of pole.

Replace screw in the upper screw hole.

Replacing Bulb

Unscrew frosted globe counter-clockwise and remove.

Pull bulb straight up. Replace with #906 9-Watt Wedge Base Replacement Bulb.

Screw lens clockwise onto pole.

Clean the light with a mild soap and warm water solution. Never use solvents or abrasives that may damage the lens or housing of the light.