Featured products

Attwood Automatic Bilge Pump Float Switch

This Attwood Automatic Bilge Pump Float Switch features an integral cover that dampens bilge sloshing to reduce pump cycling and prevent debris interference. With a compact, low profile design, it mounts on any surface from a horizontal angle up to a 24° angle. Featuring a sealed switch mechanism, this bilge pump float switch will resist electrical shock, moisture, and fume-ignition.

Features:

Compact, Low Profile Design

No Large Voltage Drop Which Reduces Bilge Pump Output

Wire Leads Do Not Flex Or Hinge With The Float

Incorporates A Reliable and Affordable Mechanical Switch That Actuates Pump Motor At 2” Water Level

Actuates Pump At 2" Water Level

Sealed Switch Mechanism Resists Moisture, Fume-Ignition, and Electrical Shock

Mounts On Any Surface From A Horizontal Angle Up To A 24° Angle

Integral Cover Dampens Bilge Sloshing To Reduce Pump Cycling, and Prevents Debris Interference

Contains No Mercury, Which Is Listed As A Health Hazard and “Persistent Toxic Substance” In Over 26 States

Designed To Be Used With 12-Volt or 24-Volt Bilge Pumps and Other Accessories

Converts Bilge Pumps To Fully Automatic Operation

Maximum Amp Draw Is 12 Amps (At 12-Volt D.C.) Or 6-Amps (At 24-Volts D.C.)

Attwood Marine Bilge Pump Float Switch w/ Cover

This Attwood Marine Bilge Pump Float Switch w/ Cover features a compact, low profile design that mounts on any surface from a horizontal angle up to a 24° angle. The integral cover dampens bilge sloshing to reduce pump cycling and prevent debris interference. With a sealed switch mechanism, this bilge pump float switch resists moisture, fume-ignition and electrical shock.

Features:

Compact, Low Profile Design

Mounts On Any Surface From A Horizontal Angle Up To A 24° Angle

Converts Bilge Pumps To Fully Automatic Operation

Integral Cover Dampens Bilge Sloshing To Reduce Pump Cycling, and Prevents Debris Interference

Incorporates A Reliable and Affordable Mechanical Switch That Actuates Pump Motor At 2” Water Level

Contains No Mercury, Which Is Listed As A Health Hazard and “Persistent Toxic Substance” In Over 26 States

Wire Leads Do Not Flex Or Hinge With The Float

Sealed Switch Mechanism Resists Moisture, Fume-Ignition, and Electrical Shock

Maximum Amp Draw Is 12 Amps (At 12-Volt D.C.) Or 6-Amps (At 24-Volts D.C.)

Specifications:

Rated: 12-Volt/24-Volt, CE-Rated

Wire/Connector: 36in Wire

Attwood Hand Bilge Pump with 32" Hose

This Hand Bilge pump features a 32" hose and ergonomic pump handle. Ideal for safelt removing unwanted watar from kayaks, PWCs, and other small boats.

Attwood Tsunami Mk2 Bilge Pump Installation Kit

This kit contains all you need to install your Tsunami Mk2 manual bilge pump with a 3/4" I.D. hose outlet.

Includes:

3/4" O.D. Thru-Hull Connector

5' of 3/4" I.D. hose

2 Hose Clamps

20' 16-Gauge Wire

On/Off Control Switch w/Face Plate

In-Line Fuse Holder

3Amp Fuse

Attwood Sahara Mk2 1200 GPH Automatic Bilge Pump

The Sahara Mk2 is the most reliable automatic bilge pumps Attwood has ever designed. The patented X-Air impeller is engineered to to force air bubbles trapped in the hose and underside the pump out of the pipework. This prevents the pump from running dry which can damage the bilge pump. The SteadySwitch is designed with buoyancy control, this helps reduce cycling and extends the bilge pumps working life. This pump is designed for both fresh and saltwater applications.

Easy to install, the Sahara Mk2 features external mounting feet which means you don't have to remove the basket when changing the cartridge. A universal mounting pattern makes replacement a breeze across all OEM's. The single-hand cartridge release makes it convenient to remove the bilge pump in hard to reach areas. The, included, 90° outlet features full 360° rotation so you can mount the pump in any location or orientation.

Included:

Sahara Mk2 Automatic Bilge Pump

90° Outlet

0° Outlet

Washer

Non-Return Valve

Product Features:

X-Air Impeller

Fresh/Saltwater Applicable

Attwood SteadySwitch

Easy Installation

Universal Mounting Pattern

External Mounting Feet

One-Hand Cartridge Clip

Product Specifications:

12V

5A Fuse

Check Valve

Wire Length: 29-1/2"

1200GPH @ 0' head

Click here for Attwood Sahara Mk2 Automatic Bilge Pump Technical Datasheet

Frequently Asked Questions

• What is the Attwood Sahara Mk2 1200 GPH Automatic Bilge Pump designed for? The Attwood Sahara Mk2 1200 GPH Automatic Bilge Pump is designed for both freshwater and saltwater bilge applications. It operates at 12V and is rated at 1200 GPH at 0 feet of head. The pump uses an Attwood SteadySwitch with buoyancy control to help reduce cycling.
• How does the X-Air impeller work in the Attwood Sahara Mk2 Bilge Pump? The patented X-Air impeller is engineered to force air bubbles trapped in the hose and underneath the pump out of the pipework. This helps prevent the bilge pump from running dry, which the product description states can damage the pump.
• What is the Attwood SteadySwitch on the Sahara Mk2 Automatic Bilge Pump? The Attwood SteadySwitch is designed with buoyancy control to help reduce cycling of the Sahara Mk2 Automatic Bilge Pump. The product description states that reducing cycling helps extend the bilge pump's working life.
• What outlets and components are included with the Attwood Sahara Mk2 1200 GPH Bilge Pump? The Attwood Sahara Mk2 includes the automatic bilge pump, a 90° outlet, a 0° outlet, a washer, and a non-return valve. The included 90° outlet provides full 360° rotation, allowing flexibility when mounting the pump in different locations or orientations.
• How is the Attwood Sahara Mk2 Bilge Pump designed for easy installation and maintenance? The Sahara Mk2 features external mounting feet, so the basket does not need to be removed when changing the cartridge. A one-hand cartridge clip makes pump removal convenient in hard-to-reach areas, while the universal mounting pattern is designed to make replacement easier across OEM applications.
• What are the electrical specifications of the Attwood Sahara Mk2 1200 GPH Automatic Bilge Pump? The Attwood Sahara Mk2 operates at 12V and uses a 5A fuse. It has a 29-1/2-inch wire length and includes a check valve. The pump is rated at 1200 GPH at 0 feet of head and is designed for both freshwater and saltwater applications.

Attwood Sahara Mk2 500 GPH Automatic Bilge Pump

The Sahara Mk2 is the most reliable automatic bilge pumps Attwood has ever designed. The patented X-Air impeller is engineered to to force air bubbles trapped in the hose and underside the pump out of the pipework. This prevents the pump from running dry which can damage the bilge pump. The SteadySwitch is designed with buoyancy control, this helps reduce cycling and extends the bilge pumps working life. This pump is designed for both fresh and saltwater applications.

Easy to install, the Sahara Mk2 features external mounting feet which means you don't have to remove the basket when changing the cartridge. A universal mounting pattern makes replacement a breeze across all OEM's. The single-hand cartridge release makes it convenient to remove the bilge pump in hard to reach areas. The, included, 90° outlet features full 360° rotation so you can mount the pump in any location or orientation.

Included:

Sahara Mk2 Automatic Bilge Pump

90° Outlet

0° Outlet

Washer

Non-Return Valve

Product Features:

X-Air Impeller

Fresh/Saltwater Applicable

Attwood SteadySwitch

Easy Installation

Universal Mounting Pattern

External Mounting Feet

One-Hand Cartridge Clip

Product Specifications:

12V

3A Fuse

Check Valve

Wire Length: 29-1/2"

500GPH @ 0' head

Click here for Attwood Sahara Mk2 Automatic Bilge Pump Technical Datasheet

Frequently Asked Questions

• What is the Attwood Sahara Mk2 500 GPH Automatic Bilge Pump designed for? The Attwood Sahara Mk2 500 GPH Automatic Bilge Pump is designed for both freshwater and saltwater bilge applications. It operates at 12V and is rated at 500 GPH at 0 feet of head. The automatic pump uses an Attwood SteadySwitch with buoyancy control to help reduce cycling.
• How does the X-Air impeller work in the Attwood Sahara Mk2 Bilge Pump? The patented X-Air impeller is engineered to force air bubbles trapped in the hose and underneath the pump out of the pipework. This helps prevent the bilge pump from running dry, which the product description states can damage the pump.
• What is the Attwood SteadySwitch on the Sahara Mk2 Automatic Bilge Pump? The Attwood SteadySwitch is designed with buoyancy control to help reduce cycling of the Sahara Mk2 Automatic Bilge Pump. The product description states that reducing cycling helps extend the bilge pump's working life.
• What outlets and components are included with the Attwood Sahara Mk2 500 GPH Bilge Pump? The Attwood Sahara Mk2 includes the automatic bilge pump, a 90° outlet, a 0° outlet, a washer, and a non-return valve. The included 90° outlet provides full 360° rotation, allowing flexibility when mounting the pump in different locations or orientations.
• How is the Attwood Sahara Mk2 Bilge Pump designed for easy installation and maintenance? The Sahara Mk2 features external mounting feet, so the basket does not need to be removed when changing the cartridge. A one-hand cartridge clip makes pump removal convenient in hard-to-reach areas, while the universal mounting pattern is designed to make replacement easier across OEM applications.
• What are the electrical specifications of the Attwood Sahara Mk2 500 GPH Automatic Bilge Pump? The Attwood Sahara Mk2 operates at 12V and uses a 3A fuse. It has a 29-1/2-inch wire length and includes a check valve. The pump is rated at 500 GPH at 0 feet of head and is designed for both freshwater and saltwater applications.

Attwood Tsunami Mk2 500 GPH Manual Bilge Pump

The Tsunami Mk2 is the most reliable Manual bilge pumps Attwood has ever designed. The patented X-Air impeller is engineered to to force air bubbles trapped in the hose and underside the pump out of the pipework. This prevents the pump from running dry which can damage the bilge pump. This pump is suitable for freshwater applications.

Easy to install, the Tsunami Mk2 features external mounting feet which means you don't have to remove the basket when changing the cartridge. A universal mounting pattern makes replacement a breeze across all OEM's. The single-hand cartridge release makes it convenient to remove the bilge pump in hard to reach areas. The, included, 90° outlet features full 360° rotation so you can mount the pump in any location or orientation.

Included:

Tsunami Mk2 Manual Bilge Pump

90° Outlet

0° Outlet

Washer

Non-Return Valve

Product Features:

X-Air Impeller

Freshwater Applicable

Easy Installation

Universal Mounting Pattern

External Mounting Feet

One-Hand Cartridge Clip

Product Specifications:

12V

3A Fuse

Check Valve

Wire Length: 29"

500GPH @ 0' head

Click here for Attwood Tsunami Mk2 Manual Bilge Pump Technical Datasheet

Frequently Asked Questions

• What is the Attwood Tsunami Mk2 500 GPH Manual Bilge Pump designed for? The Attwood Tsunami Mk2 500 GPH Manual Bilge Pump is designed for freshwater bilge applications. Its patented X-Air impeller helps force trapped air bubbles out of the hose and underside of the pump, helping prevent the pump from running dry. The pump operates at 12V and is rated at 500 GPH at 0 feet of head.
• What is the purpose of the X-Air impeller in the Attwood Tsunami Mk2 Bilge Pump? The X-Air impeller is engineered to force air bubbles trapped in the hose and beneath the pump out of the pipework. According to the product description, this helps prevent the bilge pump from running dry, which can damage the pump.
• What outlets are included with the Attwood Tsunami Mk2 500 GPH Manual Bilge Pump? The Attwood Tsunami Mk2 includes both a 90° outlet and a 0° outlet. The included 90° outlet can rotate through 360°, allowing the pump to be mounted in different locations or orientations. A washer and non-return valve are also included with the pump.
• How easy is the Attwood Tsunami Mk2 Bilge Pump to remove for maintenance? The Tsunami Mk2 features external mounting feet, so the basket does not need to be removed when changing the cartridge. Its one-hand cartridge clip also allows the pump to be removed conveniently, including from hard-to-reach areas.
• Does the Attwood Tsunami Mk2 500 GPH Bilge Pump use a universal mounting pattern? Yes. The Attwood Tsunami Mk2 features a universal mounting pattern designed to make replacement easier across different OEM applications. The pump also includes external mounting feet and an easy-to-use cartridge release for installation and removal.
• What are the electrical specifications of the Attwood Tsunami Mk2 500 GPH Manual Bilge Pump? The Attwood Tsunami Mk2 operates at 12V and uses a 3A fuse. It has a 29-inch wire length and includes a check valve. The pump is rated at 500 GPH at 0 feet of head and is specified for freshwater applications.