303 Products EZY-Glide EZY-Stik II Model 840 Mechanical Steering Kit

EZY-Glide EZY-Stik II Model 840 Mechanical Steering Kit

The EZY-Glide EZY-Stick is designed by EZY-Glide who has been in the marine industry since 1981. They are an industry leader in mechanical steering kits. Mechanical technology uses push pull cables to connect the steering wheel with the outboard motor and are generally safest for smaller boats with outboard engines not exceeding 70 HP and jet drives not exceeding 90 HP.

The EZY-Stick II Model 840 Mechanical Steering Kit is a system designed to be positioned in the front of the boat. This allows for better visibility and convenience for the boat operator. Made with a one piece stainless steel drive spool it is encased in a composite high impact housing which provides a single lever steering platform for easier control for today’s fisherman. The interlocking feature makes sure a lock between the shaft and the lever.

The mechanical steering kit includes everything you need for installation with the helm, lever, mounting hardware, cable, and dress cover. It also has a 1 year manufacturer warranty.

This system is rated for:

Outboard engines not to exceed 70 HP

Jet drives not to exceed 90 HP

Specifications:

Total lever movement: 58 inches/206 degrees

Steering ratio: 6.4/1

Housing dimensions: Approx. 6" x 6"

Lever length: 6"

How to Measure a New System or Replacement Cable Length from EZY-Glide

Measure from the center of the helm position to the center of the engine.

Add 8" to this measurement.

Round up your system length measurement to the nearest 1/2 foot. (For example, a 12'2" measurement would order a 12-1/2' cable)

Click to Download EZY-Stik II Model 840 Installation Instructions

Frequently Asked Questions

• What is the EZY-Glide EZY-Stik II Model 840 Mechanical Steering Kit designed for? The EZY-Glide EZY-Stik II Model 840 is a front-mounted mechanical steering system designed for smaller boats. It uses push-pull cable steering and is rated for outboard engines up to 70 HP and jet drives up to 90 HP.
• What is included with the EZY-Glide EZY-Stik II Model 840? The EZY-Stik II Model 840 Mechanical Steering Kit includes the helm, steering lever, mounting hardware, cable, and dress cover. The kit is designed to provide the components needed for installation as a complete mechanical steering system.
• Where is the EZY-Glide EZY-Stik II Model 840 mounted? The EZY-Stik II Model 840 is designed to be positioned at the front of the boat. This front-mounted configuration provides the boat operator with better visibility and convenience while steering.
• What are the steering specifications of the EZY-Glide EZY-Stik II Model 840? The EZY-Stik II Model 840 has a steering ratio of 6.4:1 and a total lever movement of 58 inches or 206 degrees. The housing measures approximately 6" x 6", and the steering lever is 6" long.
• How do I determine the correct cable length for the EZY-Glide EZY-Stik II Model 840? Measure from the center of the helm position to the center of the engine, then add 8 inches. Round the resulting measurement up to the nearest half-foot to determine the system length. For example, a 12'2" measurement would require a 12-1/2' cable.
• Does the EZY-Glide EZY-Stik II Model 840 have a warranty? Yes. The EZY-Glide EZY-Stik II Model 840 Mechanical Steering Kit includes a 1-year manufacturer warranty. The system also features a one-piece stainless steel drive spool housed in a composite high-impact housing.