Lighting

Anderson Over 80" Low-Profile LED Trailer Rear Lighting Kit

The Anderson 947 LED Rear Lighting Kit is a low-profile submersible light kit for trailers over 80" in width. This lighting kit comes conveniently packaged with everything you need to install your tail lights. Kit includes one each of the 856/856L low-profile LED tail lights, a license bracket, mounting hardware, and installation instructions. The tail lights in this kit feature a low profile design and advanced optics for an evenly lit appearance.

Kit Includes:

(1) 856 LED Tail light

(1) 856L LED Tail light

License bracket

Mounting hardware

Installation Instructions

Features:

Low profile design

Super bright LED diodes

6x Longer life than Incandescent

Advanced lens optics

Low AMP draw

Anderson Over 80" Low-Profile Submersible LED Trailer Tail Light

The Anderson Low-Profile LED Trailer Tail light is a submersible light for trailers over 80" wide. This combination stop, turn, and tail light features a solid stat construction, meaning no bulbs to break or burn out. This LED light features 10 diodes and is rated for 100,000 hours of use. Additionally, this tail light has a fully sealed, submersible constructed and potted circuitry that protects against moisture, corrosion, and vibration. The Anderson 856 LED Trailer Tail Light exceeds all DOT rear lighting requirements for trailers 80" wide and over. This light is designed to directly replace 456-series incandescent lights.

Features:

Combination LED stop, turn, and tail light

Solid state construction

100,000 hour-rated life

Fully sealed, submersible construction

Lower amp draw than incandescent lights

Integral, dedicated side marker diode

Carriage mounting bolts included

Exceeds all DOT rear lighting requirements for trailers 80" wide and over

Dimensions:

Anderson LumenX Oval LED Trailer Stop, Turn, & Tail Light

The Anderson LumenX Oval Trailer Light is a stop, turn, and tail light in one and includes a grommet and 421-491 plug. This light features seven white diodes behind a red oval lens. Using advanced optics, these diodes fully illuminate the whole lens. This tail light has a industry-standard PL3 socket integrated into the housing. It has a 9-16 volt operating range and its regulated design provides voltage protection and consistent light output over the entire voltage range. The LumenX Oval light meets FMVSS 108 requirements in horizontal, vertical, or any 360 degree position.

Features:

Includes light, grommet, and plug

White diodes behind red lens

Industry-standard PL3 socket integrated into housing

9-16 volt operating range

Meets FMVSS 108 requirements in horizontal, vertical, or any 360 degree position

Made in the USA

Dimensions:

Anderson Under 80" Complete Trailer Light Kit

The Anderson 540 Trailer Light Kit is a complete light kit for trailers under 80" wide. This kit provides all legal lighting and reflectors for small trailers in one convenient package. In this kit, you'll find one 440 tail light, one 440L tail light, two 114a side marker lights, a 20' trailer harness, a license bracket, mounting hardware, and installation instructions.

Kit Includes:

(1) 440 Tail light

(1) 440L Tail light

(2) 114A Side marker lights

20' Trailer harness

License bracket

Mounting hardware

Installation instructions

Features:

Complete kit for small trailers

Legal lighting and reflectors for trailers under 80" wide

Made in in the USA

Anderson Surface Mount Interior Courtesy Light

Features:

Bright 12-volt interior dome light used for general illumination.

Features nylon switch and polycarbonate lens.

Lens attaches to metal base, and unit surfa

Anderson 546 Submersible Under 80" Trailer Tail Light Kit

The Anderson 546 Trailer Tail Light Kit is a submersible combo light kit for trailers less than 80" wide. This kit provides all legal lighting and reflectors for trailers that don't exceed the 80" width. This light kit includes one each of the 441/441L tail lights, two 108A side marker lights, a 20' trailer harness, a 48" trunk connector, a license bracket, and mounting hardware. This is a universal fit kit for trailers under 80".

Kit Includes:

(1) 441 Tail Light

(1) 441L Tail Light

(2) 108A Side Marker Lights

20' Trailer harness

48" Trunk connector

License bracket

Mounting hardware

Anderson Submersible Low-Profile Over 80" Trailer Tail Light w/ License Light

The Anderson 456 Combination Tail light is a low-profile, submersible trailer light for trailers over 80" in width. This combination light features a housing that slides out for easy maintenance and bulb replacement while maintaining the gasket seal. The 456 light includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex, and license light. Light mounts on slide-on 2" centers and grounds through a separate lead wire. Mounting hardware is included.

Features:

Low-profile combination tail light

For trailers over 80" in width

Incandescent bulb

Housing slides out for easy maintenance

Grounds through separate lead wire

Mounts on slide-on 2" centers

Mounting hardware included

Functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex, and license light

Dimensions:

Anderson Submersible Low-Profile Over 80" Combination Trailer Tail Light

The Anderson 456 Combination Tail light is a low-profile, submersible trailer light for trailers over 80" in width. This combination light features a housing that slides out for easy maintenance and bulb replacement while maintaining the gasket seal. The 456 light includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex. Light mounts on slide-on 2" centers and grounds through a separate lead wire. Mounting hardware is included.

Features:

Low-profile combination tail light

For trailers over 80" in width

Incandescent bulb

Housing slides out for easy maintenance

Grounds through separate lead wire

Mounts on slide-on 2" centers

Mounting hardware included

Dimensions:

Anderson Submersible Under 80" Combination Trailer Tail Light w/ License Light

The Anderson E441 Combination Trailer Tail Light is a submersible combination rear light for vehicles and trailers under  80" wide. This light includes the following functions: stop, turn, tail, rear reflex, side marker, side reflex, and license light. Features gaskets on both rear and side lenses with brown and yellow or green lead wires. The Anderson E441 light mounts on 2" centers and grounds through 1/4" mounting studs. Mounting hardware is included.

Features:

Submersible combination light

For trailers under 80" wide

Functions: Stop, turn, tail, rear reflex, side marker, side reflex, and license light

Gaskets on both rear and side lenses

Mounts on 2" centers

Grounds through 1/4" mounting studs

Includes mounting hardware

Dimensions:

Anderson Trailer License Plate Illuminator Courtesy Light

12-volt courtesy light used for low-level genereal illumination. Features polished, chrome plated housing with hooded shield to prevent upward glare. Surface mounts with two stainless steel screws on 2" centers and has separate ground wire for non-metallic

Sealed, oval stop/turn/tail light may be used on both the curbside and roadside of the trailer and is legal in either the horizontal or vertical position. Polycarbonate lens is sonic welded to the housing to form a single unit. Requires a mounting grommet

Replaces Both Right And Left Hand SideSealed Oval Tail Lamp - "60 Series"

Includes Mounting Gasket

Mounts either vertically or horizontally in a flush mount grommet for a variety of applications.

Modules available in red.

</

Anderson Flush Mount 12 Volt Marine Courtesy Light

Rectangular interior, compartment, courtesy, or general illumination utility light with chrome-plated

ABS housing. Mounts on 2 11/16” centers using lens screws as mounting hardware.

Twist-in socket assembly contains both lead wire and ground wire for mounting on all surfaces.

Requires 1 1/4” socket mounting hole for installation.

Frequently Asked Questions

• What is the Anderson Flush Mount 12 Volt Marine Courtesy Light designed for? The Anderson Flush Mount 12 Volt Marine Courtesy Light is a rectangular utility light designed for interior, compartment, courtesy, or general illumination applications.
• What type of housing does the Anderson Flush Mount Marine Courtesy Light have? The Anderson Flush Mount 12 Volt Marine Courtesy Light features a chrome-plated ABS housing.
• How is the Anderson Flush Mount 12 Volt Marine Courtesy Light mounted? The light mounts on 2-11/16-inch centers using the lens screws as mounting hardware. The twist-in socket assembly includes both a lead wire and ground wire for mounting on all surfaces.
• What size mounting hole is required for the Anderson Flush Mount Marine Courtesy Light? The Anderson Flush Mount 12 Volt Marine Courtesy Light requires a 1-1/4-inch socket mounting hole for installation.

ACR Firefly PRO Waterbug Emergency Strobe Light

The all-new Firefly PRO Waterbug is a SOLAS-approved strobe light with a built-in water activation feature that will automatically activate once submerged. With 4 activation functions, toggle between the armed mode for automatic water activation, ultra-bright strobe light or the SOS strobe to visually alert Search and Rescue of your location, then toggle to the Steady-On feature for close up recovery operations.

Our cool white light has no yellow tinting which allows for a more visible light beam that can be seen at greater distances. The innovative new wide light emission LEDs produce a 360° beam of light (41 candela) allowing for visibility of over 3.5 miles. With an energy efficient microprocessor and redesigned electronics, the Firefly PRO boasts maximum operation life in the harshest of conditions. With a single set of AA alkaline batteries, the Firefly PRO will continuously strobe for over 56 hours or use the Steady-On feature for 28 hours. That is twice as long as our competitors and exceeds USCG and SOLAS requirements by over 48 hours.

The new compact size will easily fit inside an inflatable life jacket or pocket for comfortable wear-ability. The military spec casing is rugged enough to withstand years of abuse and the harshest environments. The two lashing loops and included Velcro strap make mounting the Firefly PRO to your life jacket, belt or pack extremely easy so that the strobe light can be readily accessible the moment you need it.

1 Year Manufacturer Warranty

Specifications:

Size: 4.4" x 2.2" x 1.2"

Weight: 2.39 oz (without batteries)

Operation: Manual On/Off switch and water activation

Waterproof: Factory tested to 33' (10M)

Lamp: Cool White LED

Strobe Intensity: 41 candela (strobe)

Strobe visibility: Over 3 Miles

Strobe Flash Rate: 60 P/M +/-

Strobe Operation: 56 hours

Certification: SOLAS, USCG, MED, TSO-C85b, IMO LSA, CE

ACR Firefly PRO SOLAS Emergency Distress Strobe Light

The new Firefly PRO emergency strobe light boasts an all-new light output power management system that produces over 41 candela of light per strobe for up to 56 hours of use with standard alkaline batteries. Using wide light emission LEDs, it cuts through the foulest conditions creating a super-bright flash visible for over 3.5 miles.

The new compact size will easily fit inside an inflatable life jacket or pocket for comfortable wear-ability.  The military spec casing is rugged enough to withstand years of abuse and the harshest environments.  The two lashing loops and included Velcro strap make mounting the Firefly PRO to your life jacket, belt or pack extremely easy so that the strobe light can be readily accessible the moment you need it.

Specifications:

Manual ON/OFF Switch

Waterproof – Factory tested to 33 feet (10 m)

Lamp – LED cool white

Strobe Intensity – 26.8 Candela minimum

Strobe Visibility – Over 3.2 miles

Strobe Flash Rate – 60 P/M +/-

Strobe Operation – 56 hours minimum

Certification – SOLAS Approved, USCG Approved

ACR C-Light H2O Water-Activated Personal Distress Light

ACR's new H2O C-Light is a water-activated personal distress light that combines intense LED technology with increased operating life. This light boasts a 20 lumen LED that operates typically for 30 hours continuously. Not only does this light feature an impact resistant case, but it is also slim and lightweight, making it easy to carry in a pocket. Installation is easy - the C-Light H2O has flexible lashing loops on the side of the product, allowing for multiple mounting options such as the webbing on your backpack or straps on your life jacket. Includes a clip that is designed to conveniently slide over your inflatable life jacket's oral inflation tube.Also includes Velcro strap that can be secured around the lashing loops and creates countless additional mounting possibilities.

The C-Light H2O includes two activation methods: the light can be activated with a simple push of the On/Off button or when in the armed position, can be activated automatically when immersed in water.

Features:

For location assistance during low-light emergencies

Exceedingly bright 20 Lumen White LED

Extensive continuous operating life of greater than 30 hours

Waterproof – Tested for 24 hrs at 3.3 ft. (1m)

Water activation sensors – Automatic activation when in contact with water

Impact resistant case

Uses two “AA” 1.5V batteries (not included)

USCG/SOLAS Approved

Ideal for life jackets, camping, biking, auto, etc.

Included Velcro® strap used in conjunction with integral lashing loops for mounting flexibility

Included PFD clip for easy attachment to oral inflation tube

Specifications:

Size - 5.56" x 1.38" x 1.2"

Weight - 1.4 oz. (without batteries)

Operational Life - >30 hr. at 30°C (>20 hr at -1°C)

Waterproof - Tested for 24 hours @ 3.3 ft.

Lamp - 20 Lumen White LED

Light Type - Steady On

Battery - (2) AA Batteries (sold separately)

Certifications - USCG/SOLAS, CE, Transport Canada

Accessories Included:

-PFD Clip

-Lanyard

-Velcro Strap

ACR HemiLight 3 Automatic Survivor Locator Light

The choice of cruise lines worldwide, the ACR Auto HemiLight 3 attaches to almost any style life jacket. It is smaller than other approved lights and features rounded edges to maintain inflation bladder integrity in inflatable jackets. The all new LED light activates for 20+ hours when in contact with salt or fresh water and can be deactivated by sliding the switch to the off position. Installation is quick and simple. This light features two configurations and can be turned into strobe mode either manually or automatically.

Features:

Water-activated LED flashing survival light with manual deactivation switch.

Meets USCG and SOLAS requirements.

Rounded edges to maintain integrity of inflatable life jackets.

Smaller than other approved lights.

Highly visible flashing LED light.

Marine tough design for years of useful service.

Specifications:

Weight - 0.98 oz.

Battery - Non-hazardous lithium. 5 Year life

Waterproof - Water tight to 10 ft.

Operational Life - Exceeds 8 hr. requirement, typically 20+ hours

Operating Temperatures - +30ºF to +86ºF

Approvals: USCG SOLAS, MED SOLAS