Camco

Camco 65506 Do-It-Yourself Inboard Boat Winterizing Kit

The Camco 65506 Inboard Boat Winterizing Kit provides a convenient way to flush and prepare an inboard engine's raw-water cooling system for seasonal storage. Designed for boats with a compatible thru-hull water intake, the system can be used with many direct-drive and V-drive inboard installations.

The multi-valve assembly allows the engine to run on fresh water until it reaches operating temperature. Once the thermostat opens, the cooling-system supply can be switched from fresh water to marine antifreeze without disconnecting the system. This helps replace water inside the engine block and raw-water cooling passages before freezing temperatures arrive.

Product Features

Designed for winterizing compatible inboard marine engines

Suitable for many direct-drive and V-drive boat installations

Flushes particulates and impurities from the raw-water cooling system

Separate valves control the fresh-water and antifreeze supplies

Switches from fresh water to antifreeze without disconnecting the system

Allows the engine to reach operating temperature before antifreeze is introduced

Reusable components can be flushed, dried and stored after winterization

What's Included

12" x 7" x 3-1/2" multi-valve assembly

6' winterizing hose

5-gallon antifreeze container

Antifreeze container hose adapter

Installation clamps

Inboard Application

The Camco 65506 is intended for inboard boats with a compatible thru-hull raw-water intake. Direct drive and V-drive describe the boat's drivetrain arrangement; compatibility with this kit depends on the location and accessibility of the engine's raw-water intake. Inspect the boat's cooling-water intake configuration before beginning.

How It Works

Connect the winterizing system to a fresh-water supply and compatible inboard motor flusher positioned over the boat's thru-hull water intake. Run the engine at idle until it reaches operating temperature. The multi-valve assembly is then used to close the fresh-water supply while opening the antifreeze supply, directing marine antifreeze into the engine's raw-water cooling system.

What You Will Need

Propylene-glycol marine engine winterizing antifreeze with burst protection of at least -50°F

Fresh-water supply and garden hose

Compatible thru-hull inboard motor flusher

Recommended Inboard Motor Flusher

For compatible boats with a thru-hull water intake, we recommend the Moeller 099085-00 Pro Inboard Motor Flusher. The flusher creates a temporary water connection over the raw-water intake beneath the boat.

Motor flusher and marine antifreeze are not included. Confirm that the flusher fits securely over the boat's raw-water intake before operating the engine.

Important Usage Information

Read the Camco instructions and engine manufacturer's winterization procedure before beginning

Position the antifreeze container as directed in the installation instructions

Allow the engine to reach operating temperature before switching to antifreeze

Operate the engine at idle during the flushing and winterization process

Maintain an adequate supply of fresh water or antifreeze to the raw-water intake

Shut down the engine immediately when the antifreeze container is empty

Flush the winterizer components with fresh water and allow them to dry before storage

View the Camco 65506 Inboard Boat Winterizer Instructions (PDF)

Camco 65505 Do-It-Yourself Sterndrive Boat Winterizer Kit

The Camco 65505 Sterndrive Boat Winterizer provides a convenient way to flush and winterize a marine engine's raw-water cooling system. Its dual-valve adapter lets you warm and flush the engine with fresh water before switching the cooling-system supply to marine antifreeze.

Allowing the engine to reach operating temperature opens the thermostat so antifreeze can circulate through the engine block and raw-water cooling passages. According to Camco, thermostat removal is unnecessary when the included winterization procedure is followed correctly.

Product Features

Designed for do-it-yourself sterndrive engine winterization

Flushes particulates and impurities from the raw-water cooling system

Separate valves control the fresh-water and antifreeze supplies

Switches from fresh water to antifreeze without disconnecting the system

Allows the engine to reach operating temperature before antifreeze is introduced

Reusable components can be flushed, dried and stored after winterization

How It Works

Connect a fresh-water supply to the winterization valve, then connect the valve output to a garden hose and compatible engine flusher. Install the flusher over the water intake on the outdrive and run the engine at idle until it reaches operating temperature. The valves are then used to close the fresh-water supply while opening the antifreeze supply, directing antifreeze into the raw-water cooling system.

What You Will Need

Propylene-glycol marine engine winterizing antifreeze with burst protection of at least -50°F

Fresh-water supply

Garden hose

Compatible engine flusher

Engine flusher is not included.

Recommended Motor Flusher

For compatible outdrives with side water intakes, we recommend the Moeller 099076-00 Universal Motor Flusher. Confirm that the flusher fits securely over all cooling-water intake openings before operating the engine.

Important Usage Information

Read the Camco instructions and engine manufacturer's winterization procedure before beginning

Position the filled antifreeze container above the engine intake and winterization adapter

Allow antifreeze to reach room temperature before use for improved flow

Operate the engine at idle during the flushing and winterization process

Shut down the engine immediately when the antifreeze container is empty

Flush the winterizer components with fresh water and allow them to dry before storage

View the Camco 65505 Sterndrive Boat Winterizer Instructions (PDF)

Camco DIY Boat Winterizer

Winterizing your boat doesn’t have to mean a trip to the shop. The Camco DIY Boat Winterizer lets you prep your inboard or outboard engine right from the trailer using a simple gravity-fed system. Just add five gallons of antifreeze and your go-to flusher, no tools or extra equipment required. It flushes and protects your engine for off-season storage, helping prevent freeze damage and corrosion. Reusable and easy to set up, this handy tool cuts out costly service calls and makes seasonal prep a one-person job. A smart, budget-friendly solution for boaters who prefer to handle things themselves.

For front mounted raw water pump systems such as Volvo and others, use the Flush Adapter (sold separately).

Features:

Flushes, prepares, and protects engine for winter storage.

High-flow 5/8" hose with brass fittings improves antifreeze flow to engine.

Reinforced clear hose for improved kink resistance.

Uses 5 gallons of antifreeze

Requires only antifreeze and your flusher

Kit Includes:

Antifreeze tank with on/off valve

Winterizing tee

Reinforced clear hose with fittings

Instructions

Instructions:

Flush engine with fresh water until thermostat opens.

Switch valve from fresh water flush to begin antifreeze flow.

Water pump will pump antifreeze into the engine to complete the winterization.

Frequently Asked Questions

• What is the Camco DIY Boat Winterizer used for? The Camco DIY Boat Winterizer is designed to flush, prepare, and protect inboard or outboard boat engines for winter storage. Its gravity-fed system uses antifreeze to help protect the engine from freeze damage and corrosion during the off-season.
• What do I need to use the Camco DIY Boat Winterizer? The Camco DIY Boat Winterizer requires antifreeze and a flusher. The system uses five gallons of antifreeze and is designed to be used without tools or additional equipment. The kit includes the antifreeze tank, winterizing tee, reinforced clear hose with fittings, and instructions.
• How do I use the Camco DIY Boat Winterizer? First, flush the engine with fresh water until the thermostat opens. Then switch the valve from fresh water flushing to antifreeze flow. The water pump will pump antifreeze into the engine to complete the winterization process.
• What size hose does the Camco DIY Boat Winterizer use? The Camco DIY Boat Winterizer features a high-flow 5/8-inch hose with brass fittings to improve antifreeze flow to the engine. The reinforced clear hose is also designed for improved resistance to kinking.
• Can the Camco DIY Boat Winterizer be reused? Yes. The Camco DIY Boat Winterizer is described as a reusable system for seasonal boat winterization. It includes an antifreeze tank with an on/off valve, winterizing tee, and reinforced clear hose with fittings.
• Can the Camco DIY Boat Winterizer be used with front-mounted raw water pump systems? For front-mounted raw water pump systems such as Volvo and others, the product information specifies using a Flush Adapter, which is sold separately. Verify that your engine uses a compatible system before winterizing.

Camco Super Trailer Wheel Chock

Camco's Super Trailer Wheel Chock with Rope grants you ease of mind while you re-hitch your trailer. Constructed from durable polypropylene with UV inhibitors, this wheel chock will keep your trailer in place and last for years.

For use with tires up to 29".

Camco Trailer Wheel Chock with Rope

Camco's Trailer Wheel Chock with Rope grants you ease of mind while you re-hitch your trailer. Made from durable hard plastic with UV inhibitors, this wheel chock will keep your trailer in place and last for years. This wheel chock incliudes a rope for safely and easily removing the chock from your wheel.

For use with tires up to 26" in diameter.

Camco Dust Pan w/ Whiskbroom

Camco Dust Pan w/ Whiskbroom is a small dustpan and broom set that is easy to store and use. The whiskbroom snaps into the dustpan when not in use so you don't have to worry about losing one!

Features a convenient hanger-hole for easy storing.

Camco Collapsible Bucket

The Camco Collapsible Bucket is great for camping, traveling and even at-home use. The heavy duty, waterproof bucket holds up to 3 gallons of water, and collapses flat for storage. The lightweight material and carrying handle make it easy to bring along anywhere. Includes a zippered storage bag.

Features:

Holds up to 3 gallons

Collapses flat for easy storage

Heavy-duty waterproof material

Included storage bag

Lightweight

Camco 41970 Boat Cover Support Kit

Camco Boat Cover Support System helps prevent water from pooling in low areas of a covered boat. Designed for most boats up to 22 feet long, the adjustable support lifts the boat cover to reduce sagging and encourage water to run off.

The support height adjusts from 30 to 50 inches to accommodate different boat styles. Its heavy-duty telescoping handle locks securely in place, while the support plate and bottom plate help position the system under the cover. Easy to install and use, this system can help maintain the quality of your boat cover by reducing standing water.

Product Features

Fits most boats up to 22 feet long

Helps prevent water from pooling on low areas of the boat cover

Lifts the cover to reduce sagging and promote water runoff

Adjustable height from 30 to 50 inches

Helps maintain the quality of your boat cover

Heavy-duty telescoping handle locks securely in place

Easy to install

Kit Includes

Heavy-duty telescoping support handle

Support plate

Adapter

Bottom plate with protective surface

50-foot nylon strap with hooks

Bonus boat hook for use with the telescoping handle

Product Details

Brand: Camco

Product Type: Boat Cover Support System

Boat Length: Up to 22 feet

Adjustable Height: 30–50 inches

Strap Length: 50 feet

Camco TastePure Carbon Water Filter w/ Hose Protector

Camco TastePure Water Filter with Flexible Hose Protector reduces bad taste, odor, chlorine and sediment in drinking water. Connect the TastePure Water Filter to your drinking water safe hose for safer, cleaner water.

Features:

Large capacity water filter lasts an entire season

Greatly reduces bad taste, odors, chlorine and sediment in drinking water

Durable Carbon Filter

100 micron fiber barrier

Wide body for high flow

Quick, easy installation

No assembly required

Flexible hose protector to minimize kinking with Easy Grippe for effortless installation

In-line design streamlines water flow

Removes aluminum, bad taste, cadmium, heavy metals, hydrogen sulfide, iron, lead, mercury, odor, turbidity (cloudiness) and sediment

KDF prevents the growth of fungus, bacteria and mold in the filter when it is not in use

Fittings are CSA low lead content certified and complies with California’s AB1953 and Vermont Act 193 Low Lead Laws

Includes 1 TastePure Carbon Water Filter and a no-kink flexible hose protector.

Camco Pump Converter Winterizing Kit

Protecting your marine engine for the winter months is an important part of caring for your boat. Winterizing flushes out any water that could freeze during the cold winter months and cause costly damage to your engine. The process of winterizing your boat can be done by a trained marine mechanic or a DIYer and the Camco Winterizing Kit can help get the job done.

The Camco Winterizing Kit makes the chore of boat winterizing much easier. This permanent option requires only an adjustable wrench for a one-time installation. The kit includes a brass valve, siphon hose, Teflon tape, and pump adapters that have been engineered to last a lifetime. This Camco Winterizing Kit bypasses your fresh water supply line and uses your water pump to fill the lines with antifreeze to prevent freezing during the winter months. Camco has developed products to make winterizing a breeze.

Kit Includes:

Brass 3-Way Valve

32" Siphon Hose

Teflon tape 40" long

Pump Adapter

CSA low lead content certified and complies with California's AB1953 and Vermont Act 193 Low Lead Laws.

Frequently Asked Questions

• What is the Camco Pump Converter Winterizing Kit used for? The Camco Pump Converter Winterizing Kit is designed to help winterize boat water systems by using the existing water pump to fill the lines with antifreeze. It bypasses the fresh water supply line to help protect the water lines from freezing during winter storage.
• What is included in the Camco Pump Converter Winterizing Kit? The kit includes a brass 3-way valve, a 32-inch siphon hose, 40 inches of Teflon tape, and a pump adapter. These components are designed for a permanent installation and provide the connections needed to use the boat's water pump during winterization.
• How is the Camco Pump Converter Winterizing Kit installed? The Camco Pump Converter Winterizing Kit is designed as a permanent installation and requires only an adjustable wrench for a one-time installation. Once installed, the kit can bypass the fresh water supply line and allow the water pump to fill the lines with antifreeze.
• Does the Camco Pump Converter Winterizing Kit use the boat's existing water pump? Yes. The Camco Pump Converter Winterizing Kit is designed to use the boat's existing water pump to fill the water lines with antifreeze during winterization. The kit includes a pump adapter, brass 3-way valve, and siphon hose for this application.
• Is the Camco Pump Converter Winterizing Kit certified for low lead content? Yes. The Camco Pump Converter Winterizing Kit is CSA low lead content certified and complies with California's AB1953 and Vermont Act 193 Low Lead Laws.

Camco Brass Blow-out Plug

Completely clear your water lines with the Camco Brass Blow-out Plug. Use this plug for winterizing to prevent your water lines from freezing. Using a blow-out pump to clear your water lines will help extend the life of your water heater.

For use with 1" diameter drains.

Instructions:

Screw the blow-out plug into the city water inlet

Open all drains and faucets

Attach and activate air pump until all lines are clear

Frequently Asked Questions

• What is the Camco Brass Blow-out Plug used for? The Camco Brass Blow-out Plug is designed for winterizing water systems by helping clear water from water lines. It is used with a blow-out pump to remove water from the lines and help prevent freezing during cold-weather storage.
• How do I use the Camco Brass Blow-out Plug for winterization? Screw the blow-out plug into the city water inlet, then open all drains and faucets. Attach and activate an air pump until all water lines are clear. Clearing the lines helps prepare the water system for winter storage.
• What size drains is the Camco Brass Blow-out Plug designed for? The Camco Brass Blow-out Plug is specified for use with 1-inch diameter drains. Verify that your water system uses the specified drain size before using the plug.
• Can the Camco Brass Blow-out Plug help prevent frozen water lines? Yes. The Camco Brass Blow-out Plug is intended for winterization and helps clear water from the water lines. Removing water from the lines helps prevent them from freezing during cold-weather storage.

Camco Quick-Turn Permanent Water Heater By-Pass Kit

Simple, permanent installation of the Camco Permanent Water Heater By-Pass Kit allows you to easily drain your water heater for winterizing. Save on antifreeze when you winterize by using this easily-installed water heater by-pass kit.

Sturdy, brass backflow preventer and 100% shut off valve lets you by-pass the water heater with a single turn.

Features a crimp-resistant nylon reinforced hose.

Frequently Asked Questions

• What is the Camco Quick-Turn Permanent Water Heater By-Pass Kit used for? The Camco Quick-Turn Permanent Water Heater By-Pass Kit is designed for permanent installation to make draining a water heater easier during winterization. It allows you to bypass the water heater with a single turn and can help reduce the amount of antifreeze needed for winterizing.
• How does the Camco Quick-Turn Permanent Water Heater By-Pass Kit work? The kit uses a sturdy brass backflow preventer and a 100% shut-off valve to bypass the water heater with a single turn. This provides a convenient way to route water around the heater during winterization.
• Is the Camco Quick-Turn Water Heater By-Pass Kit permanently installed? Yes. The Camco Quick-Turn Permanent Water Heater By-Pass Kit is designed for simple, permanent installation. Once installed, the bypass can be operated with a single turn when preparing the water heater for winterization.
• What type of hose does the Camco Quick-Turn Permanent Water Heater By-Pass Kit use? The kit features a crimp-resistant nylon reinforced hose. This hose is designed to resist crimping as part of the water heater bypass system.
• Can the Camco Quick-Turn Permanent Water Heater By-Pass Kit help save antifreeze during winterization? Yes. The product is designed to bypass the water heater during winterization, which can help save antifreeze by allowing the water heater to be bypassed rather than included in the antifreeze-filled water system.

Camco Permanent Water Heater By-Pass Kit

Simple, permanent installation of the Camco Permanent Water Heater By-Pass Kit allows you to easily drain your water heater for winterizing. Comes with two brass valves, which provide non-restrictive flow. Features a crimp-resistant nylon reinforced hose.

8" hose for 6 gallon tank.

Frequently Asked Questions

• What is the Camco Permanent Water Heater By-Pass Kit used for? The Camco Permanent Water Heater By-Pass Kit is designed to provide a simple, permanent installation that allows you to drain your water heater for winterizing. It includes components designed to provide non-restrictive flow through the system.
• What is included in the Camco Permanent Water Heater By-Pass Kit? The Camco Permanent Water Heater By-Pass Kit includes two brass valves and a crimp-resistant nylon reinforced hose. The kit features an 8-inch hose designed for use with a 6-gallon tank.
• What size water heater is the Camco Permanent Water Heater By-Pass Kit designed for? The Camco Permanent Water Heater By-Pass Kit includes an 8-inch hose specified for a 6-gallon tank. Verify your water heater size before installation.
• Are the valves in the Camco Permanent Water Heater By-Pass Kit designed for unrestricted flow? Yes. The kit includes two brass valves that are designed to provide non-restrictive flow. It also includes a nylon reinforced hose designed to resist crimping.

Camco Brass Water Heater Drain Valve 1/2"

Easily replace your water heater valve with a sturdy, easily-installed brass replacement valve. The Camco Brass Water Heater Drain Valve is constructed from premium 2010-compliant brass and creates a watertight fit. This screw-on drain valve has a easy-twist handle.

Meant for indoor use.

Dimensions:

Height: 5.5"

Width: 3.63"

Length: .87"

1/2" NPT male threads

Maximum Pressure (psi): 150

Maximum Working Temperature: 210