- All categories
Your cart
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
CE Smith
55 products
55 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$23.99
Molded One Piece
Tough one piece molded design holds a needle nose plier, 2 knives and has 15 tackle hanging holes
Includes stainless mounting screws
$112.99
CE Smith Pontoon Clamp-On Rod Holder
The CE Smith Pontoon Clam-On Rod Holder is made for the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rails. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. This rod holder includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place. A gimbal pin keeps the rod from spinning and a solid bottom with drain holes prevents water from pooling.
Features:
Made from 304 stainless steel tube
Lined with a UV-resistant black PVC
Fitted with a chrome zinc alloy adjustable clamp
Angle around the rail is infinitely adjustable
Angle to the left or right adjusts in 15 degree increments
Great option for freshwater use
Specifications:
Fits 1" to 1-1/4" square rail
9" tall tube with 1-5/8" ID
Frequently Asked Questions
- What is the CE Smith Pontoon Clamp-On Rod Holder used for? The CE Smith Pontoon Clamp-On Rod Holder is designed for square rails commonly found on pontoon boats. It provides an adjustable rod-holding solution and includes liners for 1" and 1-1/4" square rails.
- What size pontoon rails does the CE Smith Clamp-On Rod Holder fit? The CE Smith Pontoon Clamp-On Rod Holder fits 1" to 1-1/4" square rails. It includes two protective liners, with one designed for each rail size, to help fit the rod holder to the square rail.
- How adjustable is the CE Smith Pontoon Clamp-On Rod Holder? The rod holder can be adjusted to different angles around the rail, while the left or right angle can be adjusted in 15-degree increments. The included hex key is used to make the angle adjustment and tighten the clamp in place.
- What is the CE Smith Pontoon Clamp-On Rod Holder made from? The rod holder uses a 304 stainless steel tube with a UV-resistant black PVC liner and a chrome zinc alloy adjustable clamp. It also includes 304 stainless mounting screws for installation.
- What are the dimensions of the CE Smith Pontoon Clamp-On Rod Holder? The CE Smith Pontoon Clamp-On Rod Holder has a 9" tall tube with a 1-5/8" inside diameter. It is designed to fit 1" to 1-1/4" square pontoon rails.
- Does the CE Smith Pontoon Clamp-On Rod Holder include installation hardware? Yes. The CE Smith Pontoon Clamp-On Rod Holder includes 304 stainless mounting screws and the hex key needed to adjust the holder's angle and tighten the clamp. It also features a gimbal pin to help keep the rod from spinning and drain holes in the solid bottom.
$53.49
CE Smith Drop-In Swivel Rod Holder
Drop-in Swivel instantly converts any in-gunnel rod holder to a swivel rod holder. Fits inside any rod holder with 1-9/16" or larger inside diameter. Investment cast 316L stainless construction. Smooth turning adjustable swivel resistance.Great for:
Fast trolling heavy baits
Bottom fishing with electric reels
Bent butt rods
Fighting big fish from the rod holder
Frequently Asked Questions
- What is the CE Smith Drop-In Swivel Rod Holder used for? The CE Smith Drop-In Swivel Rod Holder converts an existing in-gunnel rod holder into a swivel rod holder. It is designed for applications such as fast trolling with heavy baits, bottom fishing with electric reels, using bent butt rods, and fighting big fish from the rod holder.
- What size rod holders are compatible with the CE Smith Drop-In Swivel Rod Holder? The drop-in swivel fits inside rod holders with an inside diameter of 1-9/16 inches or larger. Verify the inside diameter of your existing rod holder before installation to confirm compatibility.
- What is the CE Smith Drop-In Swivel Rod Holder made from? The CE Smith Drop-In Swivel Rod Holder is made from investment cast 316L stainless steel, providing a durable construction for its rod-holding application.
- Can the swivel resistance be adjusted? Yes. The CE Smith Drop-In Swivel Rod Holder features adjustable swivel resistance, allowing the turning resistance of the swivel to be adjusted for the intended fishing application.
- What fishing applications is the CE Smith Drop-In Swivel Rod Holder suited for? This swivel rod holder is suited for fast trolling heavy baits, bottom fishing with electric reels, bent butt rods, and fighting big fish from a rod holder. Its drop-in design provides a way to add swivel functionality to compatible in-gunnel rod holders.
$28.49
Replacement liner for 80 series in-gunnel rod holder
11" long
Cut to desired angle and length
UV resistant vinyl liner protect rods
$244.49
Adjustable Resistance Swivel Gimbal
Smooth Acting Clutch
Unbreakable Cast Gimbal Cup
316L Stainless Steel
Tube + adjustment nut is 12" in total length.
0,15,30 Degree
These super heavy duty swivel rod holders feature the same quality construction and dimensions as the drain bottom 80 Series with the addition of a precision machined swivel gimbal controlled by a smooth acting clutch. Why does anyone need swivels? When high speed trolling, Smith's swivel action rod holders prevent costly main line wear by allowing the rod tip to follow the line where it trails behind the boat. The line stays centered on the roller tip preventing line wear, lost fi sh and lost tackle. They are smart to have in your gunnels when a really big fish takes your bait. And when fighting big fish it's often smarter to leave the rod in a rod holder. Smith swivels allow the angler to follow the fish while letting the strong swivel rod holder take most of the pressure. Precision machined cast stainless gimbal cup stands up to any punishment heavy tackle can dish out. White vinyl liner protects rods and is keyed with the rod holder tube to eliminate liner twist. The clutch may require occasional adjustment so Swivel Rod Holders must be installed where there will be working access to the adjustment nut on the bottom of the rod holder.
$15.49
CE Smith Trailer Coupler Lift Handle
The CE Smith Trailer Coupler Lift Handle is a safe and secure lifting handle for trailers. Dual mounting holes are sized and spaced to be able to share existing coupler mounting bolts for most 1-7/8" and 2" bolt-on couplers. Constructed of durable zinc plated steel with a vinyl grip.
There are two sets of holes on the coupler lift handle to accommodate both 3/8" and 1/2" bolts.
The 1/2" holes are 3" on center
The 3/8" holes are 2-1/4" on center
$8.99
CE Smith 29570 Rubber Boat Trailer Keel Roller End Cap 3-1/2"
The CE Smith replacement end cap is constructed of black natural rubber and is a direct replacement for original equipment on many trailers.
3-1/2" Diameter
1-5/16" Wide
5/8" Shaft
Frequently Asked Questions
- What is the CE Smith 29570 Rubber Boat Trailer Keel Roller End Cap used for? The CE Smith 29570 Rubber Boat Trailer Keel Roller End Cap is a replacement component for boat trailers. It is constructed from black natural rubber and serves as a direct replacement for original equipment on many trailers. Verify the dimensions and shaft size of your existing component before selecting this replacement.
- What size is the CE Smith 29570 Boat Trailer Keel Roller End Cap? The CE Smith 29570 Rubber Boat Trailer Keel Roller End Cap measures 3-1/2 inches in diameter and 1-5/16 inches wide. It is designed for a 5/8-inch shaft. Compare these measurements with your existing trailer roller components to verify the appropriate fit.
- What shaft size does the CE Smith 29570 Keel Roller End Cap use? The CE Smith 29570 Rubber Boat Trailer Keel Roller End Cap is designed for a 5/8-inch shaft. Confirm that your existing boat trailer roller assembly uses this shaft size before purchasing the replacement end cap.
- What material is the CE Smith 29570 Keel Roller End Cap made from? The CE Smith 29570 Keel Roller End Cap is constructed from black natural rubber. It is designed as a replacement for original equipment on many boat trailers and has a 3-1/2-inch diameter and 1-5/16-inch width.
- Is the CE Smith 29570 a direct replacement for trailer equipment? Yes. The CE Smith 29570 Rubber Boat Trailer Keel Roller End Cap is described as a direct replacement for original equipment on many trailers. Check the 3-1/2-inch diameter, 1-5/16-inch width, and 5/8-inch shaft size to verify compatibility with your existing application.
$6.49
CE Smith 29570 Rubber Boat Trailer Keel Roller End Cap 2-1/2"
The CE Smith replacement end cap is constructed of black natural rubber and is a direct replacement for original equipment on many trailers.
2-1/2" Diameter
1-1/4" Wide
1/2" Shaft
$37.99
12" long and 2-1/2" diameter rubber roller fits 1/2" shaft size. Single roller. Sold Individually
$34.99
CE Smith John Boat Block Bow Stop
CE Smith Jon Boat Bow Stop is a replacement for original equipment of most trailers.
Block dimensions:
3" x 3"
For a 3/4" Shaft
Frequently Asked Questions
- What is the CE Smith Jon Boat Bow Stop used for? The CE Smith Jon Boat Bow Stop is a replacement bow stop designed for the original equipment on most trailers. It provides a replacement block for compatible jon boat trailer applications.
- What are the dimensions of the CE Smith Jon Boat Bow Stop? The bow stop block measures 3 inches by 3 inches. Verify the dimensions of your existing bow stop before purchasing to ensure the replacement is suitable for your application.
- What size shaft does the CE Smith Jon Boat Bow Stop fit? The CE Smith Jon Boat Bow Stop is designed for a 3/4-inch shaft. Confirm that your trailer's existing shaft matches this specified size before installation.
- Is the CE Smith Jon Boat Bow Stop a replacement for original trailer equipment? Yes. The CE Smith Jon Boat Bow Stop is described as a replacement for the original equipment on most trailers. Verify the block dimensions and 3/4-inch shaft requirement before replacing your existing bow stop.
From $9.99
CE Smith Boat Trailer Rubber "Y" Bow Stop
CE Smith natural rubber "Y" stop replaces original equipment on many trailers. Made of black natural rubber.
Sizes Available:
Part Number
Size
Span
Bolt Size
29552
2" x 2"
4"
3/8"
29551
3" x 3"
6-5/8"
1/2"
29550
4" x 4"
7"
1/2"
From $10.49
CE Smith Boat Trailer Rubber Bow Roller
CE Smith Replacement trailer bow rollers constructed of black natural rubber. Fits standard brackets and shaft sizes.
Natural Black Rubber
Replaces original equipment on many trailers
Two sizes available
Sizes:
Part Number
Diameter
Width
Shaft Size
29540
3"
3-1/8"
1/2"
29541
3-1/2"
3-3/4"
1/2"
Frequently Asked Questions
- What is the CE Smith Boat Trailer Rubber Bow Roller used for? The CE Smith Boat Trailer Rubber Bow Roller is a replacement trailer bow roller designed to replace original equipment on many boat trailers. It is constructed from black natural rubber and fits standard brackets and shaft sizes. Verify the roller dimensions and shaft size against your existing trailer components before selecting a replacement.
- What material is the CE Smith Boat Trailer Rubber Bow Roller made from? The CE Smith Boat Trailer Rubber Bow Roller is made from black natural rubber. This replacement roller is designed for use with boat trailers and can replace original equipment on many trailers when the dimensions and shaft size are compatible.
- What shaft size does the CE Smith Boat Trailer Rubber Bow Roller use? Both available CE Smith Boat Trailer Rubber Bow Roller sizes use a 1/2-inch shaft. Before purchasing, confirm that your trailer bracket and existing shaft match this size and that the roller's diameter and width are appropriate for your trailer.
- What sizes of CE Smith Boat Trailer Rubber Bow Rollers are available? Two sizes are available. Part number 29540 measures 3 inches in diameter and 3-1/8 inches wide, with a 1/2-inch shaft size. Part number 29541 measures 3-1/2 inches in diameter and 3-3/4 inches wide, also with a 1/2-inch shaft size.
- How do I choose the correct CE Smith Boat Trailer Rubber Bow Roller? Compare your existing bow roller's diameter and width with the available CE Smith sizes, and confirm that the trailer uses a 1/2-inch shaft. Part 29540 is 3 inches in diameter by 3-1/8 inches wide, while part 29541 is 3-1/2 inches in diameter by 3-3/4 inches wide.
$26.99
CE Smith Ribbed Roller Black Natural Rubber
The original equipment on many trailers are the CE Smith black natural rubber rollers. The ribbed roller fits standard brackets and shaft sizes.
Features:
Black natural rubber
5" Diameter
3" wide
1-1/8" shaft
$41.49
CE Smith 29532 Rubber Boat Trailer Wobble Roller
This CE Smith wobble rubber roller can be used as a replacement for the original roller on many trailers. Fits standard brackets and 3/4" shaft size.
Black natural rubber
4-3/8" Diameter
4-3/8" Wide
3/4" Shaft
From $13.99
CE Smith Boat Trailer Spool Type Rubber Roller 1/2" Shaft
CE Smith replacement black rubber roller for trailers. Fits standard brackets and shaft sizes.
Features:
Black natural rubber
3" Diameter
4-7/8" Wide
1/2" Shaft
Frequently Asked Questions
- What is the CE Smith Boat Trailer Spool Type Rubber Roller used for? The CE Smith Boat Trailer Spool Type Rubber Roller is a replacement roller for boat trailers. It is made from black natural rubber and is designed to fit standard brackets and shaft sizes. Verify the roller dimensions and shaft size against your existing trailer components before selecting this replacement.
- What are the dimensions of the CE Smith Spool Type Rubber Roller? The CE Smith Spool Type Rubber Roller measures 3 inches in diameter and 4-7/8 inches wide. It is designed for use with a 1/2-inch shaft. Compare these measurements with your existing roller to verify the appropriate replacement size.
- What shaft size does the CE Smith Boat Trailer Rubber Roller fit? The CE Smith Boat Trailer Spool Type Rubber Roller is designed for a 1/2-inch shaft. Confirm that your existing trailer roller assembly uses a 1/2-inch shaft before selecting this replacement roller.
- What material is the CE Smith Spool Type Rubber Roller made from? The CE Smith Spool Type Rubber Roller is constructed from black natural rubber. It is designed as a replacement roller for trailers and fits standard brackets and shaft sizes when the specified dimensions are compatible with the existing trailer assembly.
- What type of trailer roller is the CE Smith Boat Trailer Rubber Roller? The CE Smith product is a spool type rubber roller designed as a replacement for trailers. It has a 3-inch diameter, 4-7/8-inch width, and 1/2-inch shaft size. Check these specifications against your current roller before purchasing.
$13.49
CE Smith 5" Boat Trailer Spool Rubber Roller 5/8" Shaft
CE Smith Rubber Spool Rollers replace original equipment on many trailers. Fits standard brackets and shaft sizes.
Black natural rubber
5" Length
3" Diameter
4-7/8" Wide
Fits 5/8" shafts
From $31.99
CE Smith Boat Trailer Deep V Rubber Keel Roller
CE Smith's Deep V rubber rollers are replacements for the original equipment of many trailers. Fit standard brackets and shaft sizes.
Black natural rubber
3-3/8" diameter
5/8" shaft
Lengths Available:
8"
10"
12"
18"
Frequently Asked Questions
- What is the CE Smith Boat Trailer Deep V Rubber Keel Roller used for? The CE Smith Boat Trailer Deep V Rubber Keel Roller is designed as a replacement roller for the original equipment on many boat trailers. These Deep V rollers fit standard brackets and shaft sizes and are made from black natural rubber.
- What size shaft does the CE Smith Deep V Rubber Keel Roller fit? The CE Smith Deep V Rubber Keel Roller is designed for a 5/8-inch shaft. It fits standard brackets and shaft sizes, making it suitable as a replacement for the original equipment of many boat trailers.
- What are the dimensions of the CE Smith Boat Trailer Deep V Rubber Keel Roller? The CE Smith Deep V Rubber Keel Roller has a 3-3/8-inch diameter and is available in several lengths. Available lengths are 8, 10, 12, and 18 inches.
- What lengths are available for the CE Smith Deep V Rubber Keel Roller? The CE Smith Deep V Rubber Keel Roller is available in 8-inch, 10-inch, 12-inch, and 18-inch lengths. Select the length that matches your existing trailer roller before purchasing a replacement.
- What is the CE Smith Deep V Rubber Keel Roller made of? The CE Smith Deep V Rubber Keel Roller is made from black natural rubber. It is designed as a replacement for original equipment on many boat trailers and fits standard brackets and shaft sizes.
From $37.49
CE Smith Bow Bell Trailer Roller Assembly
CE Smith Bow Bell is constructed of thermal plasticized rubber making it durable. Helping you get your boat on the trailer on the first go and preventing damage from boat to trailer contact makes this the perfect item for any boater.
29332 Specifications:
6" Wide
1/2" Shaft
Fits 3" wide center roller bracket
Black TPR
4-1/2" Diameter
29333 Specifications:
8" Wide
1/2" Shaft
Fits 4" wide center roller bracket
Black TPR
5-1/2" Diameter
$91.49
CE Smith Ribbed Roller Kit - Yellow TPR
The CE Smith Roller Kit replaces worn ribbed rollers.
Features:
Yellow TPR
Zinc plated washers & clips
Kit Includes:
Four 5" diameter x 3" wide ribbed rollers to fit 1-1/8" shaft
with polypropylene hubs
Four Delrin bushings to fit rollers to 3/4" shaft
Four 1*1/8" washers
Four 3/4 washers
Four retainer rings
$108.99
CE Smith Ribbed Roller Kit - Black Natural Rubber
The CE Smith Roller Kit replaces worn ribbed rollers.
Features:
Black natural rubber
Zinc plated washers & clips
Kit Includes:
Four 5" diameter x 3" wide ribbed rollers to fit 1-1/8" shaft
with polypropylene hubs
Four Delrin bushings to fit rollers to 3/4" shaft
Four 1*1/8" washers
Four 3/4 washers
Four retainer rings
$67.99
CE Smith Jon Boat Support Bunk & Bracket Assembly 24"
The Jon Bunk & Bracket Assembly uses bunk mount crossways to support the flat bottom of boat. The assembly is adjustable from 5-1/2" up tp 8" above tongue.
Features:
All mounting hardware for a 2" or 3" wide tongue
Board is untreated Sothern yellow pine covered with high quality, marine grade carpet
Heavy-duty bracket is made of galvanized steel
Made in USA
Sold individually
From $191.99
CE Smith Boat Trailer Guide-Ons - Lighted Post-Style
Lighted guide-on posts are boat trailer guides that make it easy to load your boat onto your trailer, as well as safer to transport your craft after dark. For durability and ease of use, CE Smith boat trailer guide-ons are the industry’s best. Here’s how they work:
- As the trailer is backed down the ramp and is partially submerged, these 40" tall boat trailer guide-ons, which are mounted at the rear corners of the frame, remain above the water line. This provides two visual targets to guide your boat safely while loading. The CE Smith boat trailer guides feature LED post lights for visibility even in darkness, making it easier for you to load your boat at night and in inclement weather. For additional safety, the lighted posts enable other drivers to see your trailer when you're on the road. These durable pre-galvanized steel support posts are easy to install. Just mount each horizontally on top of or below your trailer's frame rail. Slide the posts into the boat guide supports and secure the posts so that the distance between them correctly matches the width of your boat.
- CE Smith Boat Trailer Guide Benefits:
Lighted top for greater visibility.
Combination amber and red lights provide increased visibility when trailering.
Lights clearly mark position when loading your boat/where the trailer is behind the tow vehicle when backing down a ramp in the dark. (Red light faces backward. Amber light faces forward.)
Features:
2" PVC post is notched to prevent twisting
Includes mounting hardware for trailer frames up to 3" width x 4-1/4" height
1-1/2" Square, 16 gauge pre-galvanized steel uprights
Available in 40 inches or 60 inches heights
Sold in Pairs
Made in the USA
NOTE: Does not replace mandated trailer lights
Specifications:
Part Number
Size
Side Adjustment
27740
40" Above Trailer Frame
Adjusts out to 13" each side
27760
60" Above Trailer Frame
Adjusts out to 19" each side
Note: For mounting on larger trailer frames, check out CE Smith Large Frame U-Bolt Kit
Frequently Asked Questions
- What are the CE Smith Boat Trailer Guide-Ons - Lighted Post-Style used for? The CE Smith Lighted Post-Style Guide-Ons help guide a boat onto a trailer during loading while providing additional visibility after dark. The LED post lights create visual targets at the rear corners of the trailer and help mark the trailer's position when backing down a ramp at night.
- How tall are the CE Smith Lighted Post-Style Boat Trailer Guide-Ons? CE Smith offers these lighted guide-ons in 40-inch and 60-inch heights above the trailer frame. Part number 27740 is 40 inches tall and adjusts outward up to 13 inches on each side, while part number 27760 is 60 inches tall and adjusts outward up to 19 inches on each side.
- What type of lights are included on the CE Smith Lighted Guide-Ons? The guide-ons feature combination amber and red LED post lights for increased visibility. The red light faces backward and the amber light faces forward. The lights help identify the trailer during boat loading and provide visibility when trailering after dark.
- What trailer frames do the CE Smith Lighted Post-Style Guide-Ons fit? The included mounting hardware fits trailer frames up to 3 inches wide by 4-1/4 inches high. For larger trailer frames, a CE Smith Large Frame U-Bolt Kit is required. The guide-ons use 1-1/2-inch square, 16-gauge pre-galvanized steel uprights.
- How are the CE Smith Lighted Post-Style Guide-Ons installed? The guide-on supports mount horizontally on top of or below the trailer frame rail. The posts slide into the boat guide supports and are secured at a width that matches the boat. The 2-inch PVC posts are notched to help prevent twisting.
- Are the CE Smith Lighted Post-Style Guide-Ons a replacement for required trailer lights? No. The CE Smith Lighted Post-Styl…
From $292.49
CE Smith Roller Bunk
CE Smith came up with their Roller Bunk with small crafts and difficult ramps in mind. Coming pre-assembled and drilled makes for easy installation. It can even be mounted on top of existing bunk boards. These CE Smith Roller Bunks can be installed using 10003g mounting brackets if lift or angle is needed, or may be bolded directly to the trailer frame for a flat bottom boat. These bunks can even be mounted on top of existing bunk boards.
Product Details:
Durable 2' polypropylene rollers on 1/2" shafts mounted in a heavy gauge pre-galvanized channel
Supports up to 1500 lbs of distributed weight
Instructions included
Sold in Pairs
Mounting hardware not included
$175.49
CE Smith 27672 Pontoon Roller Guide-Ons
Bunk trailers are the trailer of choice for transporting pontoon boats. The bunk trailer has a much wider track than the more conventional scissors trailer. Trailering a pontoon craft to and from the water this way requires skill, as the width commands more of any roadway lane. Additionally, boating forums frequently address the issues that arise from using a bunk trailer. One of the ways to circumvent problems loading and unloading your pontoon from a bunk trailer is by installing pontoon trailer roller guides. These pontoon rollers are relatively easy to install and facilitate the loading and unloading of your vessel. The CE Smith Pontoon Roller Guide On is perfect for bunk style pontoon trailers, with either a box, channel, or I-beams up to 3" wide by 4-1/4" tall. Minimum friction rolling action easily guides the pontoon boat onto the trailer. Its height is 25-inches above the trailer frame. Be sure to mount these pontoon trailer roller guides so that the roller bunks are 2-3" from pontoons on a trailer frame cross member.
Pontoon Trailer Roller Guides Include:
Zinc Plated Hardware
Galvanized Steel Construction
U-Bolt Mounting Brackets
Includes two rubber roller bunks
Fits frames up to 3" wide and 4-1/4" tall
Made in the U.S.A.
Frequently Asked Questions
- What are the CE Smith 27672 Pontoon Roller Guide-Ons used for? The CE Smith 27672 Pontoon Roller Guide-Ons are designed for bunk-style pontoon boat trailers. Their roller bunks provide minimum-friction rolling action to help guide a pontoon boat onto the trailer during loading and unloading.
- What trailer frames do the CE Smith 27672 Pontoon Roller Guide-Ons fit? These pontoon trailer roller guides fit box, channel, or I-beam trailer frames up to 3 inches wide by 4-1/4 inches tall. Verify your trailer frame dimensions before installation to ensure they are within the specified limits.
- How high are the CE Smith 27672 Pontoon Roller Guide-Ons above the trailer frame? The CE Smith 27672 Pontoon Roller Guide-Ons extend 25 inches above the trailer frame. The product description recommends mounting them so the roller bunks are positioned 2-3 inches from the pontoons on a trailer frame cross member.
- What is included with the CE Smith 27672 Pontoon Roller Guide-Ons? The pontoon trailer roller guide kit includes zinc-plated hardware, galvanized steel construction, U-bolt mounting brackets, and two rubber roller bunks. These components provide the mounting hardware and roller bunks specified for the guide-on system.
- Are the CE Smith 27672 Pontoon Roller Guide-Ons suitable for bunk-style pontoon trailers? Yes. The CE Smith 27672 Pontoon Roller Guide-Ons are designed specifically for bunk-style pontoon trailers. They are intended to help guide the pontoon boat onto the trailer and facilitate loading and unloading.
- How should the CE Smith 27672 Pontoon Roller Guide-Ons be positioned? The product description recommends mounting the roller guide-ons on a trailer frame cross member so that the roller bunks are 2-3 inches from the pontoons. Follow this positioning guidance when installing the guide-ons on a compatible trailer frame.
Showing 24/55
Related collections
CE Smith products currently published by All Marine World.
- Choosing a selection results in a full page refresh.
- Opens in a new window.