- All categories
Your cart
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Moeller Marine
155 products
155 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
From $24.59
Moeller Marine Zinc Phosphate Primer
Moeller's Zinc Phosphate Primers are quality-tested to meet the needs of the marine environment. This outboard and stern drive self-etching, phosphate primer chemically bonds with aluminum and steel to form a corrosion-resistant base coat. It exceeds 800 hours of the 5% salt spray corrosion test, and is ideal for spot repair of damaged coatings. Best of all, Moeller’s zinc phosphate primer performs as well as the zinc chromate of old, and makes an excellent—and safe—alternative
Compatible with Moeller Engine Paints
Features:
Ideal for aluminum surfaces above or below the water line
Excellent resistance to the marine environment
Outstanding durability and abrasion-resistance
Improves bonding of color coat
Quick-dry formula
12 oz. net weight
Superseded to: 025802
How to Apply Moeller Zinc Phosphate Primer
Surface must be clean, dry, and free of dust before applying.
For best results, use when can is between 50° F and 90° F.
Shake can at least one minute after rattle is heard and occasionally during use.
Spray surface with steady even strokes at a distance of 8 to 10 inches.
Dries to touch in 20 minutes.
Can be topcoated in 24 hours.
Note: dry and topcoat times may vary with curing temperature, humidity, and film thickness.
Frequently Asked Questions
- What is Moeller Marine Zinc Phosphate Primer used for? Moeller Marine Zinc Phosphate Primer is a self-etching phosphate primer designed for outboard and stern drive applications. It chemically bonds with aluminum and steel to create a corrosion-resistant base coat and is especially suited for spot repairs of damaged coatings.
- Can Moeller Zinc Phosphate Primer be used on aluminum above and below the waterline? Yes. Moeller Zinc Phosphate Primer is designed for aluminum surfaces both above and below the waterline. It is formulated for marine environments and provides a base coat that improves bonding of the color coat while offering durability and abrasion resistance.
- Is Moeller Zinc Phosphate Primer compatible with Moeller Engine Paints? Yes. Moeller Zinc Phosphate Primer is compatible with Moeller Engine Paints. The primer is designed to provide a corrosion-resistant base and improve adhesion of the subsequent color coat.
- How should Moeller Zinc Phosphate Primer be applied? Make sure the surface is clean, dry, and free of dust before application. Shake the can for at least one minute after the rattle begins, and shake it occasionally while using it. Spray with steady, even strokes while holding the can approximately 8 to 10 inches from the surface.
- What temperature is recommended for applying Moeller Zinc Phosphate Primer? For best results, use Moeller Zinc Phosphate Primer when the can is between 50°F and 90°F. Drying and topcoat times can vary depending on curing temperature, humidity, and film thickness, so these conditions should be considered during application.
- How long does Moeller Zinc Phosphate Primer take to dry before topcoating? Moeller Zinc Phosphate Primer dries to the touch in approximately 20 minutes and can be topcoated in 24 hours. Actual drying and topcoat times may vary with curing temperature, humidity, and film thickness.
$20.59
Moeller 025740 Platinum Gray Sandable Primer
The Moeller Platinum Gray Sandable Primer is for surfaces above or below the waterline including bare metal, steel, iron, fiberglass, and wood. This sandable primer has a quick dry formula and superior adhesion for a single coat hiding. Helps fight rust and improves bonding of color coat. Ideal for small repairs.
Features:
12 oz weight
Quick Dry Formula
Superior Adhesion
Single coat hiding
Ideal for small repairs
Fights Rust
$21.29
Moeller Marine Clear Coat Lacquer - 12 oz.
Finishing any paint project should include Moeller's Clear Coat to increase luster and depth. This quick-dry formula features enhanced UV protection and increases luster and depth.
For use on all outboard and inboard engines, stern drive and lower unit applications.
Moeller's finest acrylic resin Clear Coat completes your surface coverage.
Fortifies your surface's resistance to harsh environmental conditions.
Creates the depth and luster necessary for a professional shine.
Can be reapplied any time to maintain protective luster.
12 oz. net weight
How to Apply Moeller Clear Coat Lacquer
For best results, prime any bare metal surfaces with Moeller primers before applying motor color. Protect surrounding areas from spray mist. For best results, use when can is between 50°F and 90°F.
Surface must be clean, dry, and free of rust before painting.
Shake can at least one minute after rattle is heard and occasionally during use.
Spray surface with steady even strokes at a distance of 8 to 10 inches.
Several light coats give a better finish than one heavy coat.
If clogging develops, turn sprayhead 1/4 turn or remove and clean sprayhead slot. DO NOT stick pin or other objects into can opening.
To clear sprayhead for future use, turn can upside down and spray for 3 seconds.
Completely empty cans may be recycled or disposed of with regular trash.
Frequently Asked Questions
- What is Moeller Marine Clear Coat Lacquer used for? Moeller Marine Clear Coat Lacquer is a quick-drying acrylic resin clear coat designed to increase luster and depth on marine engine finishes. It is intended for outboard and inboard engines, stern drives, and lower units, while also helping the finished surface resist harsh environmental conditions.
- How do I apply Moeller Marine Clear Coat Lacquer? Make sure the surface is clean, dry, and free of rust before application. Shake the can for at least one minute after the rattle is heard and periodically during use. Spray with steady, even strokes from 8 to 10 inches away. Several light coats provide a better finish than one heavy coat.
- What temperature is recommended for applying Moeller Clear Coat Lacquer? For best results, use Moeller Clear Coat Lacquer when the can is between 50°F and 90°F. Before spraying, ensure the surface is clean, dry, and free of rust, and protect surrounding areas from spray mist.
- Can Moeller Clear Coat Lacquer be reapplied? Yes. Moeller Clear Coat Lacquer can be reapplied at any time to maintain the protective luster of the finished surface. Several light coats are recommended rather than one heavy coat for a better finish.
- Should bare metal be primed before applying Moeller Clear Coat Lacquer? Yes. For best results, bare metal surfaces should first be primed with Moeller primers before applying motor color and the clear coat. The surface should also be clean, dry, and free of rust before painting.
- How should I clear or clean the sprayhead on Moeller Clear Coat Lacquer? If clogging develops, turn the sprayhead one-quarter turn or remove it and clean the sprayhead slot. Do not insert a pin or other object into the can opening. To clear the sprayhead for future use, turn the can upside down and spray for three seconds.
$22.49
Moeller Marine Engine Paint - Honda
Heat and solvent resistant acrylic lacquer is formulated for the extended staying power boat engines need. For use on all outboard & inboard engines, stern drive, and lower unit applications.
Features:
Color matched to your engine's original color.
Oil & gasoline resistant
Quick-dry formula
12 oz. Net Weight
Directions for Use:
Surface must be clean, dry, and free of dirt, grease, grime, rust, ect. For best results, use when paint can is between 50°F and 90°F.
Shake can vigorously for approximately 1 minute and periodically during use.
Spray surface with steady, even strokes at a distance of 8"-12".
Several light coats give a better finish than one heavy coat.
From $22.49
Moeller Engine Paint - Volvo
Heat and solvent resistant acrylic lacquer is formulated for the extended staying power boat engines need. For use on all outboard & inboard engines, stern drive, and lower unit applications.
Features:
Color matched to your engine's original color.
Oil & gasoline resistant
Quick-dry formula
12 oz. Net Weight
Directions for Use:
Surface must be clean, dry, and free of dirt, grease, grime, rust, etc.. For best results, use when paint can is between 50°F and 90°F.
Shake can vigorously for approximately 1 minute and periodically during use.
Spray surface with steady, even strokes at a distance of 8"-12".
Several light coats give a better finish than one heavy coat.
$20.49
Moeller Marine Engine Paint - OMC
Heat and solvent resistant acrylic lacquer is formulated for the extended staying power boat engines need. For use on all outboard & inboard engines, stern drive, and lower unit applications.
Color matched to your engine's original color.
Oil & gasoline resistant
Quick-dry formula
Superior durability
12 oz. Net Weight
Directions for Use:
Surface must be clean, dry, and free of dirt, grease, grime, rust, ect. For best results, use when paint can is between 50°F and 90°F.
Shake can vigorously for approximately 1 minute and periodically during use.
Spray surface with steady, even strokes at a distance of 8"-12".
Several light coats give a better finish than one heavy coat.
From $20.89
Moeller Yamaha Engine Paint
Moeller's Yamaha Engine Paints are quality-tested and formulated to meet the demands of marine environments. Heat and solvent resistant acrylic lacquer is formulated for the extended staying power boat engines need. For use on all outboard & inboard engines, stern drive, and lower unit applications. Moeller engine paints are resistant to gasoline, oil, and heat and are formulated for superior durability.
Features:
Color matched to your engine's original color
Fast-drying
Superior durability
Resistant to gasoline, oil and heat
Good hiding and adhesion
12 oz. Net Weight
How to Apply Moeller Yamaha Engine Paint
Dry Time (to touch): 10 Minutes
Dry Time (full cure): 24 hours
Recoat Time: Anytime
Surface must be clean, dry, and free of dirt, grease, grime, rust, ect. For best results, use when paint can is between 50°F and 90°F.
Shake can vigorously for approximately 1 minute and periodically during use.
Spray surface with steady, even strokes at a distance of 8"-12".
Several light coats give a better finish than one heavy coat.
Frequently Asked Questions
- What is Moeller Yamaha Engine Paint used for? Moeller Yamaha Engine Paint is a heat- and solvent-resistant acrylic lacquer formulated for marine engine applications. It is designed for use on outboard and inboard engines, stern drives, and lower units, with resistance to gasoline, oil, and heat for durable coverage.
- Is Moeller Yamaha Engine Paint matched to the original engine color? Yes. Moeller Yamaha Engine Paint is color matched to the original color of the engine. It also provides good hiding and adhesion to help produce a durable finished surface when properly applied.
- How should I prepare a surface before applying Moeller Yamaha Engine Paint? The surface must be clean, dry, and free of dirt, grease, grime, rust, and other contaminants before painting. For best results, use the paint when the can is between 50°F and 90°F.
- How should Moeller Yamaha Engine Paint be applied? Shake the can vigorously for approximately one minute and continue shaking periodically during use. Spray with steady, even strokes from a distance of 8-12 inches. Several light coats are recommended instead of one heavy coat for a better finish.
- How long does Moeller Yamaha Engine Paint take to dry? Moeller Yamaha Engine Paint dries to the touch in approximately 10 minutes and reaches full cure in 24 hours. The product information specifies that recoating can be done anytime.
- What makes Moeller Yamaha Engine Paint suitable for marine engine applications? Moeller Yamaha Engine Paint is formulated for the demands of marine environments and provides resistance to gasoline, oil, and heat. The acrylic lacquer formulation is also designed for superior durability and extended staying power on marine engines and related applications.
$20.39
Moeller Marine Engine Paint - Mercury
Heat and solvent resistant acrylic lacquer is formulated for the extended staying power boat engines need. For use on all outboard & inboard engines, stern drive, and lower unit applications.
Features:
Color matched to your engine's original color.
Oil & gasoline resistant
Quick-dry formula
Superior durability
12 oz. Net Weight
Directions for Use:
Surface must be clean, dry, and free of dirt, grease, grime, rust, ect. For best results, use when paint can is between 50°F and 90°F.
Shake can vigorously for approximately 1 minute and periodically during use.
Spray surface with steady, even strokes at a distance of 8"-12".
Several light coats give a better finish than one heavy coat.
Frequently Asked Questions
- What is Moeller Marine Engine Paint - Mercury used for? Moeller Marine Engine Paint - Mercury is a heat- and solvent-resistant acrylic lacquer designed for marine engine applications. It is intended for use on outboard and inboard engines, stern drives, and lower units, and is color matched to the original engine color.
- Is Moeller Mercury Engine Paint resistant to oil and gasoline? Yes. Moeller Marine Engine Paint - Mercury is formulated to resist oil and gasoline. The acrylic lacquer also provides heat resistance and superior durability for the marine engine applications specified by the product description.
- How should Moeller Mercury Engine Paint be applied? Before painting, make sure the surface is clean, dry, and free of dirt, grease, grime, and rust. Shake the can vigorously for approximately one minute and periodically during use. Spray with steady, even strokes from 8-12 inches away. Several light coats are recommended instead of one heavy coat.
- What temperature is recommended for applying Moeller Marine Engine Paint - Mercury? For best results, the paint can should be between 50°F and 90°F when used. Surface preparation is also important, so the surface should be clean, dry, and free of dirt, grease, grime, and rust before application.
- How much Moeller Marine Engine Paint - Mercury is included? Moeller Marine Engine Paint - Mercury is supplied in a 12 oz. net weight aerosol can. The product is formulated as a quick-drying acrylic lacquer for the specified marine engine, stern drive, and lower unit applications.
From $19.69
Moeller Color Vision Outboard & Sterndrive Engine Paint
The Moeller Color VisionOutboard & Sterndrive Engine Paint is color matched to an engines original color and is formulated for marine environments. The quick dry formula is oil and gas resistant. For use on all inboard, outboard, stern drives, and lower units. Solvent and heat resistant up to 250°.
Features:
12oz net weight spray can
Quick Dry Formula
Oil/Gas resistant
Approved up to 250°
Made for Marine environments
Colors Available:
025109 Gloss White
025491 Crusader Blue
From $20.19
Moeller Johnson/Evinrude Engine Paint
Moeller Johnson/Evinrude Engine Paint is a quality-tested paint formulated to meet the demands of marine environments. Heat and solvent resistant acrylic lacquer is formulated for the extended staying power boat engines need. Moeller engine paints are resistant to gasoline, oil, and heat, and have superior durability.
Features:
Color matched to your engine's original color.
For use on all outboard & inboard engines, stern drive, and lower unit applications.
Oil & gasoline resistant
Quick-dry formula
12 oz. Net Weight
How to Apply Moeller Johnson/Evinrude Engine Paint:
- Dry Time (to touch): 10 Minutes
- Dry Time (full cure): 24 Hours
- Recoat Time: Anytime
Surface must be clean, dry, and free of dirt, grease, grime, rust, ect. For best results, use when paint can is between 50°F and 90°F.
Shake can vigorously for approximately 1 minute and periodically during use.
Spray surface with steady, even strokes at a distance of 8"-12".
Several light coats give a better finish than one heavy coat.
$8.69
Moeller 020307-10 Brass Garboard Drain Plug
The Moeller Brass 1/2" Garboard Drain Plug is an OEM certified replacement brass drain plug. Features a flanged 90° on one end to function as a drain for transom, motorwell, baitwell, or livewell. Has a 1/2" IPT thread. Moeller OEM replacement parts are an industry benchmark in quality and durability.
Specifications:
OEM Certified
1/2" IPT Thread
Brass
Showing 155/155
Related collections
Moeller Marine products currently published by All Marine World.
- Choosing a selection results in a full page refresh.
- Opens in a new window.