Pettit EZ Poxy High Gloss Topside Marine Paint
Pettit Easypoxy delivers professional-grade protection for above-waterline boat surfaces with its advanced polyurethane formula. This high-gloss topside paint resists fading, chalking, and UV damage while standing up to saltwater, weather exposure, and general wear. The self-leveling formula applies smoothly by brush, roller, or spray, covering up to 600 square feet per gallon. Available in 34 colors with quart and gallon sizes, it works on properly prepared fiberglass, wood, and metal surfaces. Apply at least two coats between 50°F and 90°F for optimal results and long-lasting durability in harsh marine conditions.
NOTE: Ground-shipped within the Continental U.S. only.
Features
High-Gloss Finish: This high-gloss marine paint creates a stunning finish that resists fading and chalking, providing a durable and sleek aesthetic. Its UV-resistant properties prevent fading even with constant sunlight exposure.
Durable and Weather-Resistant Formula: Pettit topside paint is formulated to withstand the harsh marine environment. Its durability protects against abrasion, scratches, and wear caused by exposure to saltwater, wind, and weather.
Easy Application: Both experienced boaters and beginners can apply Pettit EZ Poxy to achieve a professional finish. Use a brush, roller, or sprayer, and let its self-leveling properties and user-friendly formula achieve stunning results.
Specifications
Finish: High-gloss
Coverage: Up to 600 sq. ft/gal.
Number of Coats: At least two coats minimum
Colors: 34 colors available; refer to our Pettit paint color chart
Pack Size: Available in one quart for all colors and one gallon for White, Hatteras Off-White and Semi-Gloss White
Associated Products
To get the best results, pair your Pettit EZ Poxy with these products:
Pettit 120 Thinner: Use for brushing, rolling, and clean-up
Pettit 121 Thinner: Use for spraying
Pettit Satin Additive: Achieve a semi-gloss to semi-flat finish that reduces glare on deck surfaces and interiors.
Pettit EZ-Prime: Before applying Pettit topside paint, apply a primer as a base coat, particularly on surfaces that are aged, cracked, checked, pitted, rough, or not fully smooth, to ensure optimal adhesion and a flawless finish.
How To Apply Pettit Easypoxy Topside Paint
Pettit EZ Poxy is best applied in temperatures between 50°F and 90°F, with low humidity and no rain. Avoid painting in direct sunlight or extreme heat, which may affect drying and leveling.
Prepare your surface for paint application. Refer to our “Non-Fiberglass Surface Preparation” guide below.
Stir the paint thoroughly before use.
Apply a thin, even coat with a brush, roller, or spray, and let it dry overnight.
Lightly sand with 220 grit sandpaper.
Apply a second coat and let it cure for 8 to 24 hours, depending on your area’s temperatures.
Application Notes
Dry Film Thickness per Coat: 1.5 mils (3 wet mils)
Coverage: 600 sq. ft/gal.
Application Temp: 50°F Min. / 90°F Max.
Avoid applying multiple coats in a single day. Applying excessively thick layers over 4 wet mils can prevent proper drying and produce a soft, under-cured paint film.
Avoid painting on extremely humid days (90°+ RH) or when it’s raining.
Avoid painting outdoors in the late afternoon, as dew can negatively impact the wet paint film and compromise the finish.
In cooler temperatures, ensure that the air and surface temperatures stay at or above 50°F for at least 8 hours after application to allow proper curing.
Although thinning Pettit EZ Poxy paint is not recommended for brush or roller applications, up to 10% of Pettit 120 Brushing Thinner can be added in hot weather to help maintain a wet edge. For optimal results on large, smooth surfaces, use a short roller and level it with the tip of a brush.
For traditional spray applications, thin Pettit EZ-Poxy using 15 to 20% …
