Lenco Trim Tabs

Lenco Stainless Steel Hatch Lift Slide Bracket

Stainless steel slide bracket for use with hatch lifts. Includes stainless steel hatch lift attaching hardware.

System Type - Single or Dual Actuator

Compatibility - Any Boat

Lenco Replacement Stainless Steel Hatch Lift Pull Pin

This is a genuine Lenco replacement stainless steel hatch pull pin. Designed for use with all Lenco 12 & 24 Volt hatch lifts.

Lenco 50015-002D Trim Tab Actuator 7° Mounting Shim

This trim tab actuator mounting shim offers 7° of tilt and is for use with upper and lower mounting brackets.

Compatible with:

50014-001D

50015-001D

Lenco 50015-001D Standard Trim Tab Actuator Upper Mounting Kit

This Lenco actuator mounting kit is designed for trim tab systems in the old style (2007 and older). The crastin features three screw holes with 1 wire hold and a gland seal is included.

Lenco 50014-001D Trim Tab Actuator Lower Mounting Bracket

3 Bolt

Lenco Marine Trim Tab Keypad Extension Harness - 10'

Extension harness for 123SC or 124SSR trim tab keypads.

Overmolded Construction

Length: 10'

Lenco 15171-001 LED Integrated Trim Tab Switch Kit (Dual) Complete your Lenco trim tab system with the latest, maintenance-free (ALL-IN-ONE) integrated tactile switch kit design. This NEW switch technology improves accuracy and integrates the control box functionality into the key pad bezel. LED indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions. Trim Switch Features: Simple, quick, Plug & Play installation Instant response Built-in retractor Low profile design Self-contained key pad with waterproof Plug & Play Deutsch connectors 2 high-intensity LED Indicator displays show the exact position of your trim tabs at all times Photo Eye for optimum viewing in all light conditions Backlit key pad for optimum viewing at night Trim Tab Switch Specifications: 36" power pigtail Wiring harness length 30" (76.2 cm) from the back of the switch bezel 2 1/16" hole cut-out size 4.08" clearance required from the back of the key pad's mounting location Overall key pad size of 2.75" x 2.75" 3 Year Manufacturers Warranty Frequently Asked Questions

• What does the Lenco LED Integrated Trim Tab Switch Kit (Dual) do? The Lenco LED Integrated Trim Tab Switch Kit (Dual) provides control for dual trim tab systems while also displaying trim tab position through built-in LED indicators. Its all-in-one design integrates control box functionality directly into the keypad bezel.
• What features help improve visibility while using this switch? This switch features two high-intensity LED position indicators, a backlit keypad for night viewing, and a photo eye that adjusts indicator intensity based on ambient light for easier visibility in changing conditions.
• What makes the Lenco LED Integrated Trim Tab Switch Kit easy to install? The Lenco switch uses a self-contained low-profile keypad design with waterproof plug-and-play Deutsch connectors to simplify installation. It also includes a built-in retractor and integrated control box functionality within the switch bezel.
• What are the key dimensions and wiring specifications for this trim tab switch? This switch has an overall keypad size of 2.75" x 2.75", a 2-1/16" hole cut-out size, 4.08" mounting clearance, a 30" wiring harness measured from the back of the switch bezel, and a 36" power pigtail.
• Does the Lenco LED Integrated Trim Tab Switch Kit include a warranty? Yes. This trim tab switch is backed by a 3-year manufacturer’s warranty. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What does the Lenco LED Integrated Trim Tab Switch Kit (Dual) do?", "acceptedAnswer": { "@type": "Answer", "text": "The Lenco LED Integrated Trim Tab Switch Kit (Dual) provides control for dual trim tab systems while also displaying trim tab position through built-in LED indicators. Its all-in-one design integrates control box functionality directly into the keypad bezel." } }, { "@type": "Question", "name": "What features help improve visibility while using this switch?", "acceptedAnswer": { "@type": "Answer", "text": "This switch features two high-intensity LED position indicators, a backlit keypad for night viewing, and a photo eye that adjusts indicator intensity based on ambient light for easier visibility in changing conditions." } }, { "@type": "Question", "name": "What makes the Lenco LED Integrated Trim Tab Switch Kit easy to install?", "acceptedAnswer": { "@type": "Answer", "text": "The Lenco switch uses a self-contained low-profile keypad design with waterproof plug-and-play Deutsch connectors to simplify installation. It also includes a built-in retractor and integrated control box functionality within t…

Lenco 15170-001 LED Integrated Trim Tab Switch Kit - Single Complete your Lenco trim tab system with the latest, maintenance-free (ALL-IN-ONE) integrated tactile switch kit design. This NEW switch technology improves accuracy and integrates the control box functionality into the key pad bezel.LED indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions. 12&24-Volt for Single Actuator Systems Key Features Simple, quick, Plug & Play installation Instant response Built-in retractor Low profile design Self-contained key pad with waterproof Plug & Play Deutsch connectors Wiring harness length 30" (76.2 cm) from the back of the switch bezel 36" power pigtail 2 1/16" hole cut-out size, overall key pad size of 2.75" x 2.75" 4.08" clearance required from the back of the key pad's mounting location 2 high-intensity LED Indicator displays show the exact position of your trim tabs at all times Photo Eye for optimum viewing in all light conditions Backlit key pad for optimum viewing at night Self-Check feature 3 Year WarrantyFrequently Asked Questions

• What does the Lenco LED Integrated Trim Tab Switch Kit do? The Lenco LED Integrated Trim Tab Switch Kit provides control for single actuator trim tab systems while also displaying trim tab position through built-in LED indicators. Its all-in-one design integrates control box functionality directly into the keypad bezel.
• What systems is this trim tab switch designed for? This switch is designed for 12-volt and 24-volt single actuator systems. Review your current trim tab setup to confirm compatibility before ordering.
• What features help improve visibility while using this switch? This switch features two high-intensity LED position indicators, a backlit keypad for night viewing, and a photo eye that adjusts indicator intensity based on ambient light for easier visibility in changing conditions.
• What makes the Lenco LED Integrated Trim Tab Switch Kit easy to install? The Lenco switch uses a self-contained low-profile keypad design with waterproof plug-and-play Deutsch connectors to simplify installation. It also includes a built-in retractor and integrated control box functionality within the switch bezel.
• What are the key dimensions and wiring specifications for this trim tab switch? This switch has an overall keypad size of 2.75" x 2.75", a 2-1/16" hole cut-out size, 4.08" mounting clearance, a 30" wiring harness measured from the back of the switch bezel, and a 36" power pigtail. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What does the Lenco LED Integrated Trim Tab Switch Kit do?", "acceptedAnswer": { "@type": "Answer", "text": "The Lenco LED Integrated Trim Tab Switch Kit provides control for single actuator trim tab systems while also displaying trim tab position through built-in LED indicators. Its all-in-one design integrates control box functionality directly into the keypad bezel." } }, { "@type": "Question", "name": "What systems is this trim tab switch designed for?", "acceptedAnswer": { "@type": "Answer", "text": "This switch is designed for 12-volt and 24-volt single actuator systems. Review your current trim tab setup to confirm compatibility before ordering." } }, { "@type": "Question", "name": "What features help improve visibility while using this switch?", "acceptedAnswer": { "@type": "Answer", "text": "This switch features two high-intensity LED position indicators, a backlit keypad for night viewing, and a photo eye that adjusts indicator intensity based on ambient light for easier visibility in changing conditions." } …

Lenco 15169-001 Single Standard Integrated Trim Tab Switch Kit Lenco lets you complete your single actuator system with a maintenance free, all-in-one integrated tactile trim tab switch. This switch is packed with new technologies that integrates the control box functionality into the key pad bezel. The waterproof Deutch connectors are plug and play making installation a breeze. This trim switch features a built-in retractor and provides instant response to make quick adjustments as you go. 12&24-Volt for Single Actuator Systems Trim Tab Switch Specifications: Power Pigtail: 36" Overall Key Pad Size: 2.75" x 2.75" Hole Cut-Out Size: 2-1/16" Wiring Harness Length: 30" (from the back of the switch bezel) Key Pad Mounting Clearance: 4.08" Trim Tab Switch Features: Simple, quick, Plug & Play installation Instant response Built-in retractor Low profile design Self-contained key pad Plug & Play Deutsch connectors Frequently Asked Questions

• What does the Lenco 15169-001 Single Standard Integrated Trim Tab Switch Kit do? The Lenco 15169-001 Single Standard Integrated Trim Tab Switch Kit provides control for single actuator trim tab systems, allowing quick trim tab adjustments from a compact integrated keypad switch.
• What systems is this trim tab switch designed for? This switch is designed for 12-volt and 24-volt single actuator systems. Review your current trim tab setup to confirm compatibility before ordering.
• What makes the Lenco 15169-001 easy to install? The Lenco 15169-001 features a self-contained keypad design with plug-and-play waterproof Deutsch connectors to help simplify installation. Its integrated design also combines control box functionality into the keypad bezel.
• What features are built into this trim tab switch? This trim tab switch features instant response, a built-in retractor, a low-profile design, and integrated control box functionality within the keypad bezel.
• What are the key dimensions and wiring specifications for the Lenco 15169-001? This switch has an overall keypad size of 2.75" x 2.75", a 2-1/16" hole cut-out size, 4.08" keypad mounting clearance, a 36" power pigtail, and a 30" wiring harness measured from the back of the switch bezel. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What does the Lenco 15169-001 Single Standard Integrated Trim Tab Switch Kit do?", "acceptedAnswer": { "@type": "Answer", "text": "The Lenco 15169-001 Single Standard Integrated Trim Tab Switch Kit provides control for single actuator trim tab systems, allowing quick trim tab adjustments from a compact integrated keypad switch." } }, { "@type": "Question", "name": "What systems is this trim tab switch designed for?", "acceptedAnswer": { "@type": "Answer", "text": "This switch is designed for 12-volt and 24-volt single actuator systems. Review your current trim tab setup to confirm compatibility before ordering." } }, { "@type": "Question", "name": "What makes the Lenco 15169-001 easy to install?", "acceptedAnswer": { "@type": "Answer", "text": "The Lenco 15169-001 features a self-contained keypad design with plug-and-play waterproof Deutsch connectors to help simplify installation. Its integrated design also combines control box functionality into the keypad bezel." } }, { "@type": "Question", "name": "What features are built into this trim tab switch?", "acceptedAnswer": { "@type": "Answer", "text": "This trim tab switch features instant response, a built-in retractor, a low-profile design, and integrated control box functionality within the keypad bezel." } }, { "@type": "Question", "name": "What are the key dimensions and wiring specifications for the Lenco 15169-001?", "acceptedAnswer": { "@t…

Lenco 15122-001 XDS Trim Tab Actuator 1.25" Stroke

Lenco XDS Actuator. All mounting hardware is included. 6' Wire Included.

12V

Stroke - 1-1/4"

End - 3/8"

Top Cap - 5/16"

Replaces OEM Part # 20740-0035

Lenco XDS Trim Tab Actuator FAQs

• Will the Lenco 15122-001 actuator fit my boat? The Lenco 15122-001 may be the correct replacement if your existing trim tab system uses a 12V XDS actuator with a 1.25-inch stroke, 5/16-inch top mounting hole, and 3/8-inch end mounting hole. It replaces Lenco OEM part number 20740-0035. Confirm all specifications before ordering, since similar-looking Lenco actuators may use different stroke lengths or mounting configurations.
• What Lenco part number does this actuator replace? The Lenco 15122-001 XDS actuator replaces OEM part number 20740-0035.
• What is the stroke length of the Lenco 15122-001 actuator? This XDS trim tab actuator has a 1.25-inch stroke. Stroke length should be verified against the existing actuator before selecting a replacement.
• What mounting-hole sizes does this Lenco actuator use? The actuator uses a 5/16-inch top-cap mounting hole and a 3/8-inch end mounting hole. Both mounting points should match the existing installation.
• Is the Lenco 15122-001 a 12V or 24V actuator? The Lenco 15122-001 is a 12V trim tab actuator. It should only be used with a compatible 12V trim tab system.
• What is included with the Lenco 15122-001 actuator? This replacement actuator includes the required mounting hardware and a six-foot wire.
• Are Lenco trim tab actuators interchangeable? Not all Lenco actuators are interchangeable. Voltage, stroke length, actuator type, mounting-hole sizes, and replacement part number should all be checked before ordering. A replacement that looks similar may not fit or operate correctly.
• How do I identify my existing Lenco trim tab actuator? Look for the identification or branding information on the face of the existing actuator near the Lenco label. Compare the actuator type, voltage, stroke length, mounting-hole sizes, and OEM part number with the replacement specifications. See our Lenco trim tab actuator identification guide for additional help.
• Can I replace only one Lenco actuator? A single actuator may be replaced when the new actuator matches the existing trim tab system and the actuator on the opposite side is still operating correctly. Inspect both actuators, the trim tabs, wiring, controls, and mounting hardware before completing the repair.

Lenco 15120-001 XDS 1.25" Stroke Replacement Trim Tab Actuator

Lenco's XDS trim tab actuator is a replacement part for your trim tab system. Lenco's ballscrew design creates a more reliable trim tab actuator that is twice as powerful compared to typical hydraulic actuators.  This trim tab kit contains all necessary mounting hardware along with a 6' wire. This actuator has a 3/8" top and end hole.

Lenco Actuator Specifications:

Stroke - 1.25"

Hole - 5/16"

Wire Length: 6'

Lenco XDS Replacement Actuator FAQs

• Will the Lenco 15120-001 actuator fit my boat? The Lenco 15120-001 may be the correct replacement if your existing trim tab system uses a compatible XDS actuator with a 1.25-inch stroke and six-foot wire. Confirm the actuator model, system voltage, mounting-hole sizes, stroke length, and existing part number before ordering because similar-looking Lenco actuators are not always interchangeable.
• What is the stroke length of the Lenco 15120-001 actuator? The Lenco 15120-001 XDS replacement actuator has a 1.25-inch stroke. The stroke length should match the existing actuator and trim tab installation.
• What is included with the Lenco 15120-001 actuator? This replacement actuator includes the necessary mounting hardware and a six-foot wire.
• What type of actuator is the Lenco 15120-001? The Lenco 15120-001 is an XDS electric trim tab actuator designed as a replacement component for a compatible Lenco trim tab system.
• How does the Lenco ballscrew actuator design work? Lenco uses an electric ballscrew design rather than a hydraulic system. According to Lenco, this design provides reliable operation and produces twice the power of typical hydraulic actuators.
• Are Lenco XDS trim tab actuators interchangeable? Not all Lenco XDS actuators are interchangeable. Stroke length, voltage, mounting-hole configuration, wire length, actuator model, and replacement part number should all be verified before ordering.
• How do I identify my existing Lenco trim tab actuator? Locate the identification or branding information on the actuator near the Lenco label. Compare the actuator type, stroke length, voltage, mounting-hole configuration, and part number with the replacement specifications. See our Lenco trim tab actuator identification guide for help finding the correct replacement.
• Can I replace only one Lenco trim tab actuator? A single actuator may be replaced when the new actuator matches the existing trim tab system and the actuator on the opposite side is still operating correctly. Inspect both actuators, the trim tab blades, wiring, controls, and mounting hardware before completing the repair.
• What should I verify before ordering the Lenco 15120-001? Confirm the existing actuator model, stroke length, system voltage, wire length, mounting-hole sizes, and replacement part number. Do not select a replacement based only on appearance.

Lenco 15107-001 Trim Tab Actuator Deutsch Plug Kit

Actuator and Actuator Extension Harness Deutsch Plug Kit.

Contains:

5 Plugs

5 Wedges

System Type - Single or Dual Actuator

Compatibility - Any Boat

Lenco 15099-001 Universal Trim Tab Actuator Mounting Bracket Replacement Kit

For use on 1 actuator.Universal Actuator Mounting Bracket replacement kit (for 1 actuator)

Includes:

15085-001

50015-001D

50014-001D

Hardware

Lenco Rocker Switch - Dual Hatch Lift

Lenco Single Rocker Switch for Dual Gatch Lifts. Runs two hatch lifts at the same time. Compatible with any boat.

Lenco Rocker Switch for Single Cylinder Hatch Lift

Single rocker switch with deutsch plug and two 30" non-terminated power leads for Lenco Marine Single Cylinder Hatch Lifts.

Lenco Rocker Switch for Single Cylinder Hatch Lift

Lenco 15087-001 Trim Tab Actuator Delrin Mounting Pins - 2 Pack

These Lenco delrin mounting pins are designed for use with 101 & 102 trim tab actuators. These are sold in packs of 2.

Lenco 15086-001 Trim Tab Actuator Electrical Repair Kit

This Lenco Electrical Repair Kit contains a total of 16 pieces. For use with single our dual actuators.

Includes:

4 Sets of Deutsch Plug & Wedge for Acutator and Actuator Extension Harness (Orange/Grey)

4 Sets of Deutsch Receptacle & Wedge for Actuator Extension Harness (Green/Grey)

Lenco 15085-001 Standard Upper Trim Tab Actuator Mounting Bracket Standard Upper Mounting Bracket with Gland Seal(2008-present) . Specifications: Lenco Part #: 15085-001 (Original Part #116) System Type: Single or Dual Actuator Compatibility: Any Boat Frequently Asked Questions

• What is the Lenco 15085-001 Standard Upper Trim Tab Actuator Mounting Bracket used for? The Lenco 15085-001 is a standard upper mounting bracket used to mount a trim tab actuator in compatible Lenco trim tab systems. It is designed as a replacement bracket for upper actuator mounting applications.
• Does this mounting bracket include a gland seal? Yes. The Lenco 15085-001 Standard Upper Mounting Bracket includes a gland seal.
• What actuator system types is this bracket designed for? This mounting bracket is designed for use with single or dual actuator systems.
• Is the Lenco 15085-001 a replacement part? Yes. The Lenco 15085-001 is a replacement mounting bracket and replaces original part number 116.
• How do I confirm this upper mounting bracket is compatible with my trim tab setup? Review your current trim tab actuator setup and replacement part requirements before ordering. Matching the correct bracket style and part number helps ensure proper fit and installation. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What is the Lenco 15085-001 Standard Upper Trim Tab Actuator Mounting Bracket used for?", "acceptedAnswer": { "@type": "Answer", "text": "The Lenco 15085-001 is a standard upper mounting bracket used to mount a trim tab actuator in compatible Lenco trim tab systems. It is designed as a replacement bracket for upper actuator mounting applications." } }, { "@type": "Question", "name": "Does this mounting bracket include a gland seal?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. The Lenco 15085-001 Standard Upper Mounting Bracket includes a gland seal." } }, { "@type": "Question", "name": "What actuator system types is this bracket designed for?", "acceptedAnswer": { "@type": "Answer", "text": "This mounting bracket is designed for use with single or dual actuator systems." } }, { "@type": "Question", "name": "Is the Lenco 15085-001 a replacement part?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. The Lenco 15085-001 is a replacement mounting bracket and replaces original part number 116." } }, { "@type": "Question", "name": "How do I confirm this upper mounting bracket is compatible with my trim tab setup?", "acceptedAnswer": { "@type": "Answer", "text": "Review your current trim tab actuator setup and replacement part requirements before ordering. Matching the correct bracket style and part number helps ensure proper fit and installation." } } ] }

Lenco High Performance Trim Tab Kit - 29" x 14" High Performance Trim Tab Kit - 29" x 14" Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes. Boat length - 30' - 52". Switch required: 15071-001.Frequently Asked Questions

• What is the Lenco High Performance 29" x 14" Trim Tab Kit designed for? This trim tab kit is designed for high performance and extreme duty applications on boats from 30 to 52 feet in length. Its radiused blade design is especially useful for multiple outboard applications where maximum clearance is important.
• What features help improve performance with this trim tab kit? The 29" x 14" radiused blades are designed to provide maximum clearance for multiple outboard applications and help reduce cavitation to the prop. The kit is also built for extreme duty use and maximum trim tab performance.
• What is included with the Lenco High Performance Trim Tab Kit? This kit is factory assembled with a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
• What size boats is this trim tab kit recommended for? This trim tab kit is recommended for boats from 30 to 52 feet in length. Review your boat setup and transom configuration to confirm compatibility before ordering.
• Is a switch required for this trim tab kit? Yes. This trim tab kit requires switch 15071-001. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What is the Lenco High Performance 29\" x 14\" Trim Tab Kit designed for?", "acceptedAnswer": { "@type": "Answer", "text": "This trim tab kit is designed for high performance and extreme duty applications on boats from 30 to 52 feet in length. Its radiused blade design is especially useful for multiple outboard applications where maximum clearance is important." } }, { "@type": "Question", "name": "What features help improve performance with this trim tab kit?", "acceptedAnswer": { "@type": "Answer", "text": "The 29\" x 14\" radiused blades are designed to provide maximum clearance for multiple outboard applications and help reduce cavitation to the prop. The kit is also built for extreme duty use and maximum trim tab performance." } }, { "@type": "Question", "name": "What is included with the Lenco High Performance Trim Tab Kit?", "acceptedAnswer": { "@type": "Answer", "text": "This kit is factory assembled with a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75\" sacrificial anodes." } }, { "@type": "Question", "name": "What size boats is this trim tab kit recommended for?", "acceptedAnswer": { "@type": "Answer", "text": "This trim tab kit is recommended for boats from 30 to 52 feet in length. Review your boat setup and transom configuration to confirm compatibility before ordering." } }, { "@type": "Question", "name": "Is a switch required for this trim tab kit?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. This trim tab kit requires switch 15071-001." } } ] }

Lenco 15064-001 RetroFit Kit for 12V Electric Bennett Systems

Now you don't have to buy a new boat or an entire new set of trim tabs to get all of the advantages of the latest in trim tab technology!

Lenco's high performance, instant response and maintenance-free actuators are now available to retrofit any boat equipped with the standard length Bennett hydraulic cylinders.

This simple Bennett RetroFit Kit includes everything necessary to upgrade your current boat without any drilling or filling. You simply discard the hydraulic pump unit and the two Bennett cylinders. Install the two Lenco electric actuators (6' Leads) with our new style upper mounting brackets on your existing Bennett trim planes. Connect our actuator wiring to the existing harness (jumper wires are included for attaching to current switch). Complete installation instructions are included.

Features:

2 Bennett Electric Actuators with 6' Leads

2 Upper Style Mounting Brackets

Switch Wiring Kit

All Mounting Hardware

Does not include switch; can either purchase separately or use existing

Not meant for SeaFox, SeaHunt, Chaparral, Seachase, or Rabalo boats.

Lenco RetroFit Kit for Benett Systems

Lenco 15060-001 102HD Replacement Trim Tab Actuator

Lenco Actuators are durable and maintenance-free. Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance and high strength for long life. Lenco's ballscrew design creates a more reliable trim tab actuator that is twice as powerful compared to typical hydraulic actuators. This 12V actuator features a tough, high-torque motor that easily pushes 500lbs.

Built for marine environments, this actuator has an improved O-ring design and an integrated wiper seal. The waterproof Deutsch connector eliminates the possibility of water intrusion and makes for easy plug and play installation. This trim tab kit contains all necessary mounting hardware along with a 6' wire. This actuator has a 3/8" top and end hole.

Lenco Part#: 15060-001

OEM Part#: 20791-0015

Trim Tab Actuator Construction Details:

Top Cap Design

Stronger top cap mounting clevis design.

Torx Screws

New & improved pressure-tight torx screws

Thrust Bearing

Molded-in thrust bearing design

Housing Wall

Thicker and stronger motor housing wall

Over-Molded Cable

Over-molded cable providing a stronger, tighter seal

Upper Bracket

Upper mounting bracket with gland seal

Specifications:

Top Cap Hole: 5/16"

End Hole: 5/16"

Stroke Length: 4-1/4"

Voltage: 12V

Wire Length: 6'

Overall Length Tip-to-Tip: 13"

Features:

Waterproof

Ball Screw Design.

Deutsch Connectors

Durable

Insant Response

High-Impact, ultraviolet resistant nylon

Click here for Lenco 102HD Trim Tab Actuator Replacement Guide

Frequently Asked Questions

• What does the Lenco 102HD Replacement Trim Tab Actuator do? The Lenco 102HD Replacement Trim Tab Actuator controls trim tab movement to help adjust your boat’s running attitude, stability, and ride quality. It is designed as a replacement actuator for compatible Lenco trim tab systems.
• Is the Lenco 102HD actuator built for marine environments? Yes. This actuator is built for marine use with a waterproof design, improved O-ring sealing, an integrated wiper seal, and a waterproof Deutsch connector to help prevent water intrusion.
• Does this replacement actuator include mounting hardware? Yes. This trim tab actuator includes the necessary mounting hardware along with a 6’ wire for installation.
• What are the key specifications of the Lenco 102HD actuator? This 12V actuator has a 4-1/4" stroke length, a 13" overall tip-to-tip length, 5/16" top and end holes, and a 6’ wire length. Its high-torque motor is designed to deliver 500 lbs. of push force.
• What design features help improve the performance of this actuator? The Lenco 102HD uses a ball screw design for reliable, high-strength trim tab operation. Additional features include precision molded high-alloy gears, a stronger top cap mounting clevis, thicker motor housing walls, pressure-tight Torx screws, and an over-molded cable for a tighter seal.