Fenders

Tie Down Engineering Galvanized Metal Trailer Fender

Tie Down Heavy duty Stamped Metal Fenders are made from 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets not included.

Dimensions:

Wheel Size

Dimensions

Part Number

8 Inch

7" x 20" x 6" (LxWxH)

86264

12 Inch

7" x 23.5" x 6.5" (LxWxH)

86265

13 Inch

8" x 27.5" x 11" (LxWxH)

86266

14-15 Inch

9" x 31.5" x 13" (LxWxH)

86267

Frequently Asked Questions

• What is the Tie Down Engineering Galvanized Metal Trailer Fender designed for? The Tie Down Engineering Galvanized Metal Trailer Fender is a heavy-duty stamped metal fender made from 16-gauge galvanized steel. It is available in sizes for 8-, 12-, 13-, and 14- to 15-inch wheels, providing different dimensional options for trailer applications.
• What size wheels are compatible with the Tie Down Engineering trailer fenders? The Tie Down Engineering trailer fenders are available for several wheel sizes. Part 86264 is for 8-inch wheels, 86265 is for 12-inch wheels, 86266 is for 13-inch wheels, and 86267 is for 14- to 15-inch wheels. Check your wheel size and required fender dimensions before selecting a part.
• What are the dimensions of the Tie Down Engineering Galvanized Metal Trailer Fenders? The dimensions vary by wheel size. The 8-inch wheel fender measures 7" x 20" x 6", the 12-inch version measures 7" x 23.5" x 6.5", the 13-inch version measures 8" x 27.5" x 11", and the 14-15-inch version measures 9" x 31.5" x 13" (LxWxH).
• What are the part numbers for the Tie Down Engineering galvanized trailer fenders? The part numbers correspond to the available wheel sizes. Part 86264 fits the 8-inch wheel size, 86265 fits 12-inch wheels, 86266 fits 13-inch wheels, and 86267 fits 14- to 15-inch wheels. Verify the required wheel size before choosing a part number.
• What material are the Tie Down Engineering trailer fenders made from? The Tie Down Engineering heavy-duty stamped metal trailer fenders are constructed from 16-gauge galvanized steel. The galvanized steel construction is specified as part of the fenders' heavy-duty design.
• Are mounting brackets included with the Tie Down Engineering Galvanized Metal Trailer Fender? No. Mounting brackets are not included. The fenders can be drilled to accommodate a variety of mounting options, allowing the mounting configuration to be determined separately for the trailer application.

Tie Down Small Plastic Trailer Fender

Heavy duty fender from Tie Down Engineering made from high-impact polyethylene for use with most 8-12" trailer wheels. This fender has no load capacity and is not intended for use as a step. Mounting brackets and hardware are not included.

7-3/4" Wide x 21" Long x 5" Tall

Sold individually

Available in black or white

Sea Dog Rail Mount Fender Holder

The Sea Dog Rail Mount Fender Holder are made of 304 stainless. They are easy to mount and able to adjust to any angle of railing. They fold up flat for easy and convenient storage when not in use.

Features:

Made with 304 Formed stainless steel

holds 2 fenders

Available in 7-1/2", 9-1/2", and 11-1/2" diameters

Fits tubing 7/8" - 1".

Polyform True-Fit Fender Holder

This flexible system conforms to virtually any rail or pulpit system.

What do you want from your fender holders? Most boaters would agree that versatility, durability and style are the key. Polyform’s True Fit Fender Holder system is the answer. The True Fit Fender Holder is a modular system that fits rails from 7/8” to 1” at any height or any angle. Because of its modular design, you can mix or match sizes or add on as your needs change. When you choose Polyform True Fit Fender Holders, you select one of the most popular fender holders on the market.

Features:

Versatile system for easy installation

Durable construction for years of service

Flexible modular design - add on or reconfigure at anytime

Available as individual pieces or as a kit for a two or three holder assembly

One of the most popular fender holders on the market

Specifications:

Kits for use with 2 fenders and mount to 7/8" - 1" rails

Model:

TFR-230-2

TFR-280-2

Diameter

9 in

12 in

230 mm

280 mm

Fits

F-2,F-3,G-5,

F-5,F-6,G-6

HTM-2,NF-5

HTM-3,NF-5

Frequently Asked Questions

• What is the Polyform True-Fit Fender Holder designed for? The Polyform True-Fit Fender Holder is a modular fender storage system designed to fit boat rails from 7/8 to 1 inch. Its flexible design allows the holder to conform to rails or pulpit systems at different heights or angles.
• What size boat rails does the Polyform True-Fit Fender Holder fit? The Polyform True-Fit Fender Holder system is designed for rails measuring 7/8 to 1 inch. The system can be positioned at various heights and angles, providing flexibility when installing fender holders on a boat.
• Can the Polyform True-Fit Fender Holder system be expanded or reconfigured? Yes. The True-Fit system uses a modular design that allows you to mix and match sizes or add components as your needs change. Individual pieces are available, as well as kits configured for two- or three-holder assemblies.
• What fenders are compatible with the Polyform True-Fit Fender Holder kits? The TFR-230-2 kit has a 9-inch (230 mm) diameter and fits F-2, F-3, G-5, HTM-2, and NF-5 fenders. The TFR-280-2 kit has a 12-inch (280 mm) diameter and fits F-5, F-6, G-6, HTM-3, and NF-5 fenders.
• Are Polyform True-Fit Fender Holders sold as individual pieces or kits? Polyform True-Fit Fender Holders are available as individual pieces or as kits for two- or three-holder assemblies. This modular approach allows the system to be configured according to your boat's fender storage needs.

Polyform HTM Series Fender - White

Whether hung vertically or horizontally, from your top-sides or the dock, Polyform's HTM Series excel.

In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.

Sizes Available:

8.5" x 20.5"

10.5" x 27"

Frequently Asked Questions

• What is the Polyform HTM Series Fender - White used for? The Polyform HTM Series Fender - White is designed to provide protection and stand-off for larger vessels. It can be hung vertically or horizontally from the boat's topsides or from the dock and is designed for vessels between 20 and 50 feet in length.
• What does HTM mean on the Polyform HTM Series Fender? HTM stands for hole-through-middle, describing the fender's design. This configuration allows the Polyform HTM Series Fender to be positioned vertically or horizontally depending on the application.
• What features help protect the Polyform HTM Series Fender from damage? The Polyform HTM Series Fender features vertical ribs for additional protection, reinforced tube ends to help prevent lines from pulling through, and extra wall thickness designed to resist punctures and tears.
• What size vessels is the Polyform HTM Series Fender designed for? The Polyform HTM Series Fender is designed to provide protection and stand-off for larger vessels between 20 and 50 feet in length. Select the appropriate fender size based on your vessel and application.
• What sizes are available for the Polyform HTM Series Fender? The Polyform HTM Series Fender is available in two sizes: 8.5 inches by 20.5 inches and 10.5 inches by 27 inches. Both are offered in white.

Polyform HTM Series Fender - Blue

Whether hung vertically or horizontally, from your top-sides or the dock, Polyform's HTM Series excel.

In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.

Sizes Available:

8.5" x 20.5"

10.5" x 27"

Polyform HTM Series Fender - Black

Whether hung vertically or horizontally, from your top-sides or the dock, Polyform's HTM Series excel.

In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.

Sizes Available:

8.5" x 20.5"

10.5" x 27"

Frequently Asked Questions

• What is the Polyform HTM Series Fender - Black used for? The Polyform HTM Series Fender - Black is designed to provide protection and stand-off for larger vessels. It can be hung vertically or horizontally from the boat's topsides or dock and is designed for vessels between 20 and 50 feet in length.
• What does HTM mean on the Polyform HTM Series Fender? HTM stands for hole-through-middle, referring to the fender's design. This configuration allows the fender to be hung either vertically or horizontally from the boat's topsides or dock, depending on the application.
• What features help protect the Polyform HTM Series Fender from damage? The Polyform HTM Series Fender features vertical ribs for added protection, reinforced tube ends to help prevent lines from pulling through if the fender becomes caught in a tight spot, and extra wall thickness designed to resist punctures and tears.
• What size vessels is the Polyform HTM Series Fender designed for? The Polyform HTM Series Fender is designed to provide protection and stand-off for larger vessels between 20 and 50 feet in length. Choose the appropriate size based on your vessel and application.
• What sizes are available for the Polyform HTM Series Fender - Black? The Polyform HTM Series Fender - Black is available in two sizes: 8.5 inches by 20.5 inches and 10.5 inches by 27 inches. Both sizes are offered in black.

Polyform G-Series Twin Eye Fender - White

Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. The versatile G Series fender comes in a variety of Polyform colors, enabling you to create the look you want for your boat.

Sizes Available:

5.5" x 19"

6.5" x 22"

8.8" x 26.8"

11" x 30"

Polyform G-Series Twin Eye Fender - Sand

Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. The versatile G Series fender comes in a variety of Polyform colors, enabling you to create the look you want for your boat.

Sizes Available:

5.5" x 19"

6.5" x 22"

8.8" x 26.8"

Polyform G-Series Twin Eye Fender - Green

Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. The versatile G Series fender comes in a variety of Polyform colors, enabling you to create the look you want for your boat.

Sizes Available:

5.5" x 19"

6.5" x 22"

8.8" x 26.8"

Polyform G-Series Twin Eye Fender - Burgundy

Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. The versatile G Series fender comes in a variety of Polyform colors, enabling you to create the look you want for your boat.

Sizes Available:

5.5" x 19"

6.5" x 22"

8.8" x 26.8"

Polyform G-Series Twin Eye Fender - Blue

Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. The versatile G Series fender comes in a variety of Polyform colors, enabling you to create the look you want for your boat.

Sizes Available:

5.5" x 19"

6.5" x 22"

8.8" x 26.8"

11" x 30"

Frequently Asked Questions

• What is the Polyform G-Series Twin Eye Fender - Blue used for? The Polyform G-Series Twin Eye Fender - Blue is a versatile utility boat fender designed to provide protection for boats. Its twin-eye configuration allows the fender to be positioned for different applications.
• What sizes are available for the Polyform G-Series Twin Eye Fender - Blue? The Polyform G-Series Twin Eye Fender - Blue is available in four sizes: 5.5" x 19", 6.5" x 22", 8.8" x 26.8", and 11" x 30".
• What features are included on the Polyform G-Series Twin Eye Fender? The Polyform G-Series Twin Eye Fender features ribs for extra strength and reinforced ropeholds for long-term durability. The larger sizes also include inflation valves, providing a way to adjust the fender as needed.
• How do the ribs and reinforced ropeholds benefit the Polyform G-Series Fender? The ribs add extra strength to the Polyform G-Series Fender, while the reinforced ropeholds are designed for long-term durability. Together, these features support the fender's utility-focused design.
• Is the Polyform G-Series Twin Eye Fender available in different colors? Yes. The Polyform G-Series Fender is available in a variety of Polyform colors. This product is the blue version of the G-Series Twin Eye Fender.

Polyform G-Series Twin Eye Fender - Black

Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. The versatile G Series fender comes in a variety of Polyform colors, enabling you to create the look you want for your boat.

Sizes Available:

5.5" x 19"

6.5" x 22"

8.8" x 26.8"

11" x 30"