Batteries

Perko 250 Amp Battery Selector Switch with Alternator Field Disconnect

Designed for surface mounting, the Perko Battery Selector Switch has a bright red polycarbonate housing with a large easy-to-turn black knob.

The Perko Battery Selector Switch has a number of functions – they allow for a quick and easy way to shut down the entire electrical system in an emergency; this device also permits battery selection (of two or more batteries) for specific purposes, including starting engines, running accessories or even recharging.

This device can also facilitate putting batteries in parallel for emergency starting when one or both batteries are substantially discharged.

The Alternator Field Disconnect feature offers protection for Non-Unitized Alternators, should the switch accidentally be turned to the "OFF" position with the engine running.

For use with 6 to 50 volt marine electrical systems

Capacity

250 AMPS Continuous

360 AMPS Intermittent

When used with Non-Unitized Alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running.

Perko Medium Battery Selector Switch w/ Key Lock

The Perko 8502 Battery Switches are among the most popular battery switches in the marine industry. Designed for surface mounting, the Perko Battery Selector Switch has a bright red polycarbonate housing with a large easy-to-turn black knob. High conductivity studs are long enough to handle more than 1 cable and strong enough for torque needed for secure connections. This switch can be mounted in numerous locations, and since it is ignition protected, it can be installed in the engine rooms of gasoline powered boats.

The Perko Battery Selector Switch has a number of functions – they allow for a quick and easy way to shut down the entire electrical system in an emergency; this device also permits battery selection (of two or more batteries) for specific purposes, including starting engines, running accessories or even recharging. This device can also facilitate putting batteries in parallel for emergency starting when one or both batteries are substantially discharged.

Perko Selector Switches are designed with a "make before break" feature. This allows switching between the "1", the "ALL" and the "2" positions while the engine is running. The included Key lock helps to prevent unauthorized use of the boat. Like all Perko products, this battery switch is made in the USA.

Specifications:

Ignition Protected

CE Certified

Marine UL Listed: Power Switch 716B

For use with 6 two 50 Volt Marine Electrical Systems

Capacity - 250 AMPS Continuous, 360 AMPS Intermittent

Diameter: 5-1/4"

Depth: 2-5/8"

Click to Download Perko Battery Selector Switch Installation Instructions

Perko 250 Amp Battery Selector Switch for 12, 24 or 36 Volt Systems

Designed for surface mounting, the Perko Battery Selector Switch has a bright red polycarbonate housing with a large easy-to-turn black knob.

The Perko Battery Selector Switch has a number of functions – they allow for a quick and easy way to shut down the entire electrical system in an emergency; this device also permits battery selection (of two or more batteries) for specific purposes, including starting engines, running accessories or even recharging.

This device can also facilitate putting batteries in parallel for emergency starting when one or both batteries are substantially discharged.

For use with 12, 24 or 36 volt marine electrical systems

Capacity:

250 AMPS Continuous

360 AMPS Intermittent

When used with Non-Unitized Alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running.

Frequently Asked Questions

• What is the Perko 250 Amp Battery Selector Switch used for? The Perko 250 Amp Battery Selector Switch provides a way to select between two or more batteries for purposes such as starting engines, running accessories, or recharging. It can also shut down the entire electrical system in an emergency and facilitate connecting batteries in parallel for emergency starting.
• What voltage systems is the Perko 250 Amp Battery Selector Switch compatible with? The Perko Battery Selector Switch is designed for use with 12, 24, or 36 volt marine electrical systems. Verify that the switch is appropriate for your electrical system before installation.
• What is the amperage capacity of the Perko 250 Amp Battery Selector Switch? The Perko Battery Selector Switch has a capacity of 250 amps continuous and 360 amps intermittent. These ratings should be considered when matching the switch to the applicable marine electrical system.
• Can the Perko Battery Selector Switch connect batteries in parallel? Yes. The Perko Battery Selector Switch can facilitate putting batteries in parallel for emergency starting when one or both batteries are substantially discharged.
• How is the Perko 250 Amp Battery Selector Switch mounted? The Perko 250 Amp Battery Selector Switch is designed for surface mounting. It features a bright red polycarbonate housing and a large black knob designed for easy turning.
• What happens if the Perko Battery Selector Switch is turned off while the engine is running? When used with non-unitized alternators, the Perko Battery Selector Switch will interrupt the field current when turned off with the engine running, reducing the possibility of damage.

Permatex Battery Protector & Sealer Spray 5oz 80370

Keep your battery safe from corrosion and increase its working life with this protector and sealer. Formulated to prevent the formation of acid salt corrosion that is typical found on untreated terminals.

Why you should use Battery Protector & Sealer

Prevents terminal corrosion

Stops the formation of acid salt corrosion

Improves electrical flow

Increases battery life

Simply spray on your battery, terminals, and cables either in or out of storage. Keep your system running smooth with Permatex!

Moeller 2STD Low Battery Box

The Moeller 2STD Low Battery Box is just the right battery accessory for long-life battery performance. Features non-corrosive hi-strength plastic construction complete with mounting hardware. This battery box complies with industry requirements and fits all the new style battery dimensions.

Key Features:

Constructed of high strength non-corrosive plastic

Non-corrosive high strength Polyethylene construction resists chemicals and rust

Includes hold down strap and mounting hardware

Maintains tough properties with nominal 0.185" wall thickness

Complies with all industry requirements

Meets all Coast Guard Regulations (ABYC Reg E10)

Designed to accommodate new style battery dimensions

Mounting flanges on all four sides for easy installation

Captive lid hold down fasteners

One piece seamless bottom construction

Scalloped cable entry/exit points on all four sides

Unpacked Dimensions: 17.38"L x 13.00"W x 11.25"H

Moeller Battery Tray - 27 Series Batteries

This Moeller Battery Tray is just the right accessory for long-life battery performance. Features non-corrosive, high-strength plastic construction with self-locking security knobs. Fits all new battery dimensions and with stainless steel hold down rods.

Key Features:

Constructed of high strength, non-corrosive plastic

Self-Locking Security Knobs

Fits new battery style dimensions

Easy to install

Designed to hold 27 Series batteries

Holds batteries up to 11.75"L x 6.75"w x 7.75"H

Frequently Asked Questions

• What is the Moeller Battery Tray - 27 Series Batteries used for? The Moeller Battery Tray - 27 Series Batteries is designed to hold 27 Series batteries. It features high-strength, non-corrosive plastic construction with stainless steel hold-down rods and self-locking security knobs.
• What size battery does the Moeller 27 Series Battery Tray accommodate? The Moeller 27 Series Battery Tray is designed to hold batteries up to 11.75 inches long by 6.75 inches wide by 7.75 inches high. Verify your battery dimensions before installation.
• What is the Moeller 27 Series Battery Tray made from? The Moeller Battery Tray is constructed from high-strength, non-corrosive plastic. It also features stainless steel hold-down rods and self-locking security knobs.
• Does the Moeller 27 Series Battery Tray fit new battery dimensions? Yes. The Moeller Battery Tray - 27 Series Batteries is designed to fit new battery style dimensions and is specifically designed to hold 27 Series batteries.
• How is the Moeller 27 Series Battery Tray secured? The Moeller Battery Tray uses stainless steel hold-down rods and self-locking security knobs to secure the battery in the tray.
• Is the Moeller 27 Series Battery Tray easy to install? Yes. The Moeller 27 Series Battery Tray is designed for easy installation and includes self-locking security knobs and stainless steel hold-down rods for securing compatible batteries.

Moeller Battery Tray - 29/31 Series Batteries

This Moeller Battery Tray is just the right accessory for long-life battery performance. Features non-corrosive, high-strength plastic construction with self-locking security knobs. Fits all new battery dimensions and with stainless steel hold down rods.

Key Features:

Constructed of high strength, non-corrosive plastic

Self-Locking Security Knobs

Fits new battery style dimensions

Easy to install

Designed to hold 29-31 Series batteries

Holds batteries up to 13.00"L x 7.43"W x 10.00"H

Moeller Battery Tray for 24 Series Batteries

This Moeller Battery Tray is just the right accessory for long-life battery performance. Features non-corrosive, high-strength plastic construction with self-locking security knobs. Fits all new battery dimensions and with stainless steel hold down rods.

Key Features:

Constructed of high strength, non-corrosive plastic

Self-Locking Security Knobs

Fits new battery style dimensions

Easy to install

Designed to hold 24 Series batteries

Holds batteries up to 10.25"L x 6.75"W x 8.12"H

Frequently Asked Questions

• What is the Moeller Battery Tray for 24 Series Batteries used for? The Moeller Battery Tray for 24 Series Batteries is designed to hold 24 Series batteries. It features high-strength, non-corrosive plastic construction and stainless steel hold-down rods for securing the battery.
• What size battery does the Moeller 24 Series Battery Tray accommodate? The Moeller Battery Tray is designed to hold batteries up to 10.25 inches long by 6.75 inches wide by 8.12 inches high. Verify your battery dimensions before installation.
• What is the Moeller 24 Series Battery Tray made from? The Moeller Battery Tray is constructed from high-strength, non-corrosive plastic. It also includes stainless steel hold-down rods and self-locking security knobs.
• Does the Moeller Battery Tray fit new battery dimensions? Yes. The Moeller Battery Tray for 24 Series Batteries is designed to fit new battery style dimensions and is specifically designed to hold 24 Series batteries.
• How is the Moeller 24 Series Battery Tray secured? The Moeller Battery Tray uses stainless steel hold-down rods and self-locking security knobs. These components are designed to secure the battery in the tray.
• Is the Moeller 24 Series Battery Tray easy to install? Yes. The Moeller 24 Series Battery Tray is designed for easy installation and features self-locking security knobs along with stainless steel hold-down rods for securing compatible batteries.

Moeller 8D High Battery Box

The Moeller 8D High Battery Box is just the right battery accessory for long-life battery performance. Features non-corrosive hi-strength plastic construction complete with mounting hardware. This battery box complies with industry requirements and fits all the new style battery dimensions.

Key Features:

Constructed of high strength non-corrosive plastic

Non-corrosive high strength Polyethylene construction resists chemicals and rust

Includes hold down strap and mounting hardware

Maintains tough properties with nominal 0.185" wall thickness

Complies with all industry requirements

Meets all Coast Guard Regulations (ABYC Reg E10)

Designed to accommodate new style battery dimensions

Mounting flanges on all four sides for easy installation

Captive lid hold down fasteners

One piece seamless bottom construction

Scalloped cable entry/exit points on all four sides

Frequently Asked Questions

• What is the Moeller 8D High Battery Box used for? The Moeller 8D High Battery Box is designed to accommodate new style battery dimensions and provide a battery enclosure with high-strength, non-corrosive plastic construction. It includes a hold-down strap and mounting hardware.
• What is the Moeller 8D High Battery Box made from? The Moeller 8D High Battery Box is constructed from high-strength, non-corrosive polyethylene. The material resists chemicals and rust, while the nominal 0.185-inch wall thickness maintains the box's tough properties.
• Does the Moeller 8D High Battery Box meet marine requirements? Yes. The Moeller 8D High Battery Box complies with all industry requirements and meets Coast Guard regulations under ABYC Regulation E10.
• What is included with the Moeller 8D High Battery Box? The Moeller 8D High Battery Box includes a hold-down strap and mounting hardware. It also features captive lid hold-down fasteners and mounting flanges on all four sides for installation.
• How does the Moeller 8D High Battery Box accommodate battery cables? The Moeller 8D High Battery Box has scalloped cable entry and exit points on all four sides. These openings provide multiple locations for routing battery cables from the battery enclosure.
• What design features does the Moeller 8D High Battery Box have? The Moeller 8D High Battery Box features one-piece seamless bottom construction, mounting flanges on all four sides, and captive lid hold-down fasteners. Its high-strength polyethylene construction is designed to resist chemicals and rust.

Moeller 8D Low Battery Box

The Moeller 8D Battery Box is just the right battery accessory for long-life battery performance. Features non-corrosive hi-strength plastic construction complete with mounting hardware. This battery box complies with industry requirements and fits all the new style battery dimensions.

Key Features:

Constructed of high strength non-corrosive plastic

Non-corrosive high strength Polyethylene construction resists chemicals and rust

Includes hold down strap and mounting hardware

Maintains tough properties with nominal 0.185" wall thickness

Complies with all industry requirements

Meets all Coast Guard Regulations (ABYC Reg E10)

Designed to accommodate new style battery dimensions

Mounting flanges on all four sides for easy installation

Captive lid hold down fasteners

One piece seamless bottom construction

Scalloped cable entry/exit points on all four sides

Frequently Asked Questions

• What is the Moeller 8D Low Battery Box used for? The Moeller 8D Low Battery Box is designed to accommodate new style battery dimensions and provide a protective battery enclosure. It features high-strength, non-corrosive plastic construction and includes a hold-down strap and mounting hardware.
• What is the Moeller 8D Low Battery Box made from? The Moeller 8D Low Battery Box is constructed from high-strength, non-corrosive polyethylene. The material resists chemicals and rust, while the nominal 0.185-inch wall thickness helps maintain its tough properties.
• Does the Moeller 8D Low Battery Box meet marine requirements? Yes. The Moeller 8D Low Battery Box complies with all industry requirements and meets Coast Guard regulations under ABYC Regulation E10.
• What is included with the Moeller 8D Low Battery Box? The Moeller 8D Low Battery Box includes a hold-down strap and mounting hardware. It also features captive lid hold-down fasteners and mounting flanges on all four sides for installation.
• How does the Moeller 8D Low Battery Box accommodate battery cables? The Moeller 8D Low Battery Box has scalloped cable entry and exit points on all four sides. These openings provide multiple locations for routing battery cables from the battery enclosure.
• What design features does the Moeller 8D Low Battery Box have? The Moeller 8D Low Battery Box features one-piece seamless bottom construction, mounting flanges on all four sides, and captive lid hold-down fasteners. Its high-strength polyethylene construction is designed to resist chemicals and rust.

Moeller 4D Battery Box

The Moeller 4D Battery Box is just the right battery accessory for long-life battery performance. Features non-corrosive hi-strength plastic construction complete with mounting hardware. This battery box complies with industry requirements and fits all the new style battery dimensions.

Key Features:

Constructed of high strength non-corrosive plastic

Non-corrosive high strength Polyethylene construction resists chemicals and rust

Includes hold down strap and mounting hardware

Maintains tough properties with nominal 0.185" wall thickness

Complies with all industry requirements

Meets all Coast Guard Regulations (ABYC Reg E10)

Designed to accommodate new style battery dimensions

Mounting flanges on all four sides for easy installation

Captive lid hold down fasteners

One piece seamless bottom construction

Scalloped cable entry/exit points on all four sides

Frequently Asked Questions

• What is the Moeller 4D Battery Box used for? The Moeller 4D Battery Box is designed to accommodate new style battery dimensions and provide a battery enclosure with high-strength, non-corrosive plastic construction. It includes a hold-down strap and mounting hardware for installation.
• What is the Moeller 4D Battery Box made from? The Moeller 4D Battery Box is constructed from high-strength, non-corrosive polyethylene. The material resists chemicals and rust, while the nominal 0.185-inch wall thickness maintains the box's tough properties.
• Does the Moeller 4D Battery Box meet marine requirements? Yes. The Moeller 4D Battery Box complies with all industry requirements and meets Coast Guard regulations under ABYC Regulation E10.
• What is included with the Moeller 4D Battery Box? The Moeller 4D Battery Box includes a hold-down strap and mounting hardware. It also features captive lid hold-down fasteners and mounting flanges on all four sides for installation.
• How does the Moeller 4D Battery Box accommodate battery cables? The Moeller 4D Battery Box has scalloped cable entry and exit points on all four sides. These openings provide multiple locations for routing battery cables from the enclosure.
• What design features does the Moeller 4D Battery Box have? The Moeller 4D Battery Box features a one-piece seamless bottom construction, mounting flanges on all four sides, and captive lid hold-down fasteners. Its high-strength polyethylene construction is designed to resist chemicals and rust.

Marinco 10A (5/5), 12/24V 2 Bank On-Board Battery Charger

ChargePro onboard chargers have the same housing and mounting dimensions as our traditional Charge Pro Guest chargers with a number of performance enhancements.

Features/Specs:

Charge flooded and AGM batteries

Microprocessor controlled for accurate charging

Universal input 120/230V input for go-anywhere freedom

Intuitive operation

Sense-Send™ technology senses the power needs of each battery and sends correct charge

Isolated outputs

Outputs can be put in series or parallel for higher voltage or current

Completely sealed, epoxy filled

IP68 waterproof

Designed for harsh marine and industrial environments – moisture, salt, shock and vibration tested

Non corroding housing for ultimate reliability

Meet global industry standards including UL, CE, CSA, ABYC, California efficiency regulations (CEC)

Footprint same as former Charge Pro Guest Chargers

ConnectCharge Plug for easy assembly to inlet (Item #150CCI) with no wiring

Frequently Asked Questions

• What is the Marinco 10A (5/5), 12/24V 2 Bank On-Board Battery Charger used for? The Marinco 10A (5/5), 12/24V 2 Bank On-Board Battery Charger is designed to charge flooded and AGM batteries. Its microprocessor-controlled charging and Sense-Send™ technology sense each battery's power needs and provide the correct charge.
• Can the Marinco 10A 2 Bank Battery Charger be used with 12V and 24V systems? Yes. This Marinco battery charger is specified for 12V and 24V applications. Its isolated outputs can also be connected in series or parallel when higher voltage or current is required.
• Is the Marinco 10A 2 Bank Battery Charger waterproof? Yes. The charger is completely sealed and epoxy filled and has an IP68 waterproof rating. It is designed for harsh marine and industrial environments and has been tested for moisture, salt, shock, and vibration.
• What type of AC input does the Marinco 10A 2 Bank Battery Charger use? The Marinco 10A 2 Bank Battery Charger has a universal 120/230V input. This provides flexibility for use with the specified AC input voltages while the microprocessor-controlled system manages charging accurately.
• How does Sense-Send™ technology work on the Marinco 10A 2 Bank Charger? Sense-Send™ technology senses the power needs of each battery and sends the correct charge. The charger also features isolated outputs, which can be configured in series or parallel for higher voltage or current.
• Does the Marinco 10A 2 Bank Charger require wiring for connection to an inlet? The charger can use the ConnectCharge Plug for easy assembly to the inlet. The product description identifies Item #150CCI as the ConnectCharge Plug and states that it provides connection to the inlet with no wiring.

Guest On-Board Battery Charger - 6A - 1-Bank

This Guest On-Board Battery Charger - 6A - 1-Bank is completely sealed and epoxy filled. It features non corroding housing for ultimate reliability and a microprocessor controlled for accurate charging. With intuitive operation and isolated outputs, this battery charger is designed for harsh marine and industrial environments. The outputs can be put in series or parallel for higher voltage or current.

Features:

Microprocessor Controlled For Accurate Charging

Isolated Outputs

IP68 Waterproof

Non Corroding Housing For Ultimate Reliability

Footprint Same As Former Charge Pro Guest Chargers

Intuitive Operation

Completely Sealed, Epoxy Filled

Charge Flooded, AGM Or Gel Batteries

Universal Input 120/230V Input For Go-Anywhere Freedom

Designed For Harsh Marine and Industrial Environments

Outputs Can Be Put In Series Or Parallel For Higher Voltage Or Current

Sense-Send Technology Senses The Power Needs Of Each Battery and Sends Correct Charge

ConnectCharge Plug For Easy Assembly To Inlet With No Wiring

Meet Global Industry Standards Including UL, CE, CSA, ABYC, California Efficiency Regulations (CEC)

Specifications:

Dimensions: 3.5"L x 6.4"W x 2.3"D

Input Voltage: 115 V 50/60 Hz AC

Input Amps (Max): 2.0 Amps

Input Voltage Range: 90-265A AC 50/60Hz

Output Volts: 12V DC

Charging Current: 6 Amp

AC Cable Length: 6 ft. (1.8M)

DC Cable Length: 4 ft. (1.2M)

Banks: 1

Protection Type: IP68 (Casing)

Absorption Charge Voltage (Per Bank): 14.3 V +/- 0.20 V

Float Charge Voltage (Per Bank): 13.3 V +/- 0.20 V

Rechargeable Battery Type: Any 12 V Lead Acid Batteries (Flooded and AGM)

Battery Charge Capacity (Based On 50% Drained Battery): Group 24 Through 31 (Up To 120 Amp-Hours)

Guest On-Board Battery Charger - 30A - 3-Bank

This Guest On-Board Battery Charger - 30A - 3-Bank is for all 12 volt flooded and AGM lead acid batteries. It features full automatic 5-stage performance charging and an auto-maintain energy saver mode. All models of this on-board battery charger are pre-wired for easy installation. With in-line fuses for maximum DC wire protection and wiring and battery fault detection, this charger is designed for extreme durability and long lasting use.

Features:

Microprocessor and Software Control For Precision

Shock Resistant For All Fresh and Saltwater Applications

100 Percent Waterproof (IP67)

Auto-Maintain Energy Saver Mode

Dedicated Battery Charging, Sensing and Control Per Bank

Full Automatic 5-Stage Performance Charging

For All 12 Volt Flooded and AGM Lead Acid Batteries

In-Line Fuses For Maximum DC Wire Protection

6' AC Power Cord

Up To 40 Percent Lighter

Expanded LED Charge Status Monitor

Wiring and Battery Fault Detection

All Models Are Pre-Wired For Easy Installation

All High Frequency, Digital Charging Technology

Specifications:

Dimensions: 9.0" x 4.1" x 8.7"

Amps: 30

Amps Per Bank: 10

Banks: 3

Input Voltage: 90-135 V AC 50/60 Hz

DC System Voltage: 12/24/36

Guest On-Board Battery Charger - 20A - 2-Bank

Guest On-Board Battery Chargers have been redesigned to provide optimum performance. This charger has dedicated battery charging, sending, and control per bank. Features in-line fuses for maximum DC wire protection and new digital charging technology providing long lasting use and exceptional durability. It is 100% waterproof and shock resistant for all fresh and saltwater applications. With individual sensing and control for every bank, this charger's easy-to-read graphics indicate the status of each battery bank through the charging process.

Features:

Full Automatic 5-Stage Performance Charging

All High Frequency, Digital Charging Technology

6' AC Power Cord

Shock Resistant For All Fresh and Saltwater Applications

Auto-Maintain Energy Saver Mode

For All 12 Volt Flooded and AGM Lead Acid Batteries

Up To 40 Percent Lighter

All Models Are Pre-Wired For Easy Installation

Microprocessor and Software Control For Precision

In-Line Fuses For Maximum DC Wire Protection

100 Percent Waterproof (IP67)

Built-In Safety: Reverse Polarity, Over-Current, Over-Voltage, Over-Temperature and Ignition Protection

Wiring and Battery Fault Detection

Expanded LED Charge Status Monitor

2 Year Warranty

Specifications:

Dimensions (W x H x L): 7.5" x 2.4" x 12.9"

Weight: 6.6 lbs

Input Volts: 90-135 V AC  50/60 Hz

DC System Voltage: 12/24

Max Current, During Bulk Charge: 20 A (10A/10A)

Min Battery Voltage Per Bank: 4.0 V

Float Voltage: 13.4 V (Auto Maintain Energy Saver Mode)

Click to Download Guest On-Board Battery Chargers Owners Manual

Guest On-Board Battery Charger - 15A - 3-Bank

This Guest On-Board Battery Charger - 15A - 3-Bank features individual sensing and control for every bank with easy-to-read graphics that indicate the status of each battery bank through the charging process. It is 100% waterproof and shock resistant for all fresh and saltwater applications. With in-line fuses for maximum DC wire protection and new digital charging technology, this on-board battery charger is built for long lasting use and extreme durability.

Features:

Dedicated Battery Charging, Sensing and Control Per Bank

Up To 40 Percent Lighter

All High Frequency, Digital Charging Technology

Wiring and Battery Fault Detection

All Models Are Pre-Wired For Easy Installation

Auto-Maintain Energy Saver Mode

Full Automatic 5-Stage Performance Charging

Microprocessor and Software Control For Precision

100 Percent Waterproof (IP67)

Shock Resistant For All Fresh and Saltwater Applications

Built-In Safety: Reverse Polarity, Over-Current, Over-Voltage, Over-Temperature and Ignition Protection

In-Line Fuses For Maximum DC Wire Protection

6' AC Power Cord

Expanded LED Charge Status Monitor

For All 12 Volt Flooded and AGM Lead Acid Batteries

Specifications:

Dimensions: 7-1/2" x 2-3/8" x 12-7/8"

Input Voltage: 90-135V AC 50/60Hz

Amps Output: 15A Total, 5A Per Bank (5/5/5)

Battery Banks: Three Banks, 12/24/36V

Fireboy-Xintex CMD6 Carbon Monoxide Detector w/Internal Battery

The CDM6 Carbon Monoxide detector features an internal lithium battery and utilizes an electrochemical sensor. This top of the line sensor allows for immediate alarms and stablensing to reduce false alarms. The compact design allows for inconspicuous protection. An internal relay allows for generator shutdown or external signal. The CMD6 runs off of a maintenance free internal Lithium battery that has a life expectancy of approximately 7 years. Interconnect multiple units for full vessel protection.

Features:

Compact design

Internal Lithium Battery

Internal relay

Interconnect multiple alarms

Microprocessor controlled

Specifications:

End of life: Approx. 7 years

Alarm Point: 10% COHb

Alarm Horn 85 dBA

Dimensions: 3.5" x 3.5" x 1.21"

Warranty: 1 Year limited

Click here for Fireboy-Xintex CMD6 Owners Manual

Frequently Asked Questions

• What is the Fireboy-Xintex CMD6 Carbon Monoxide Detector w/Internal Battery used for? The Fireboy-Xintex CMD6 Carbon Monoxide Detector w/Internal Battery is designed to detect carbon monoxide using an electrochemical sensor. Its compact design provides inconspicuous protection, while the internal relay can be used for generator shutdown or an external signal.
• Does the Fireboy-Xintex CMD6 have an internal battery? Yes. The Fireboy-Xintex CMD6 uses a maintenance-free internal lithium battery with a life expectancy of approximately 7 years. The detector is designed to operate using this internal battery.
• Can multiple Fireboy-Xintex CMD6 Carbon Monoxide Detectors be interconnected? Yes. Multiple Fireboy-Xintex CMD6 units can be interconnected for full vessel protection. Each detector also features an internal relay that allows for generator shutdown or an external signal.
• What type of sensor does the Fireboy-Xintex CMD6 Carbon Monoxide Detector use? The Fireboy-Xintex CMD6 uses an electrochemical carbon monoxide sensor. It is microprocessor controlled and provides immediate alarms and sensing designed to reduce false alarms.
• What are the dimensions and alarm specifications of the Fireboy-Xintex CMD6? The Fireboy-Xintex CMD6 measures 3.5 inches x 3.5 inches x 1.21 inches. It has an 85 dBA alarm horn and a listed alarm point of 10% COHb. Its approximate end-of-life period is 7 years.
• What is the warranty for the Fireboy-Xintex CMD6 Carbon Monoxide Detector? The Fireboy-Xintex CMD6 Carbon Monoxide Detector includes a 1-year limited warranty, according to the listed product specifications.

Fireboy-Xintex CMD6-MB Battery Operated Carbon Monoxide Detector

The Fireboy-Xintex Battery Operated Carbon Monoxide detector uses a microprocessor powered sensor to accurately detect Carbon Monoxide levels. Fire-Boy has constructed a low current draw (less than 4 mA) thanks to their new sensor, allowing them to offer one of the few battery powered Carbon Monoxide alarms on the market. Features dual LED alarm lights along with a 85dBA horn. Available in a Black housing.

Specifications:

Fume Type: Carbon Monoxide

Ultra-low Current Draw

Long Sensor Life

Electromechanical Sensor

Sealed Lithium Ion Battery

No Wiring Required

Compact D

Click here for Fireboy-Xintex Battery Operated Carbon Monoxide Detector Manual

Frequently Asked Questions

• What is the Fireboy-Xintex CMD6-MB Battery Operated Carbon Monoxide Detector used for? The Fireboy-Xintex CMD6-MB Battery Operated Carbon Monoxide Detector is designed to detect carbon monoxide levels. It uses a microprocessor-powered sensor and provides visual and audible alerts through dual LED alarm lights and an 85 dBA horn.
• Does the Fireboy-Xintex CMD6-MB require wiring? No. The Fireboy-Xintex CMD6-MB uses a sealed lithium ion battery and requires no wiring. Its ultra-low current draw of less than 4 mA allows the detector to operate as a battery-powered carbon monoxide alarm.
• What type of sensor does the Fireboy-Xintex CMD6-MB use? The Fireboy-Xintex CMD6-MB uses a microprocessor-powered electromechanical sensor to detect carbon monoxide levels. The product specifications also identify the sensor as having a long sensor life.
• How does the Fireboy-Xintex CMD6-MB alert users to carbon monoxide? The Fireboy-Xintex CMD6-MB features dual LED alarm lights and an 85 dBA horn to provide carbon monoxide alerts. These visual and audible indicators are included in the detector's compact design.
• What type of battery does the Fireboy-Xintex CMD6-MB Carbon Monoxide Detector use? The Fireboy-Xintex CMD6-MB uses a sealed lithium ion battery. The battery-powered design eliminates the need for wiring and is supported by the detector's ultra-low current draw of less than 4 mA.
• What color housing does the Fireboy-Xintex CMD6-MB have? The Fireboy-Xintex CMD6-MB Battery Operated Carbon Monoxide Detector is available with a black housing. Its compact design allows the detector to be used without requiring wired installation.

Dual Pro Sportsman Battery Charger 2 Battery 20 Amp

A smaller, more affordable, and lighter charger is what Sportsman customers asked for. Sportsman put safety and reliability first. Dual Pro Batteries use zero spark technology, are fully automatic, and totally waterproof. They earned the title of having the #1 choice for boat manufacturers. With LED readings and microprocessors make the unit even easier to use!

Product Specifications

Two 10 Amp Banks

12V,24V

Size : 4.75" H x 8" W x 9.25"

Features:

Battery maintenance mode

On-board diagnostic codes

Temperature compensated

Advanced microprocessor controlled

Battery systems available: 12V - 48V

LED lights indicate the state of charge

Reverse polarity protected

No installation restrictions

FCC Parts A & B interference compliant

DC charge cables = 5ft. AC power cord = 3ft.

Approved and meets ISO 8846 Marine standards

Ignition protected (US Coast Guard 33 CFR 183.410

Made in the USA

Dual Pro RealPro Series Battery Charger 2 Banks 6 Amps

Looking for a reliable, safe, and affordable battery? RealPro Series (formerly Recreation Series) is the battery charger that delivers. Engineered for those who need a charging system on a part time basis and don't need to purchase a higher priced system. Designed to be used in a variety of different watercraft. RealPro is easy to use, just plug it in and you are good to get out on the water!

Product Specifications:

Two Bank 6 Amps

Size: 3"H x 6.5"W x 7.25"L

Product Features:

Designed for use in fresh and salt water

Battery maintenance mode

Approved for Wet Cell and Abosrbed Glass Mat batteries

Independent outputs

fully automatic

DC charge cables = 5ft and AC power cord = 3ft

Meets ISO 8846 Marine Standards

FCC 15 Parts A and B Interference compliant

Designed and Engineered in the USA

Dual Pro Recreational Series Data Page

Dual Pro Recreational Series Data Page

CRC 7.5oz Battery Terminal Protector 05046

CRC Battery Terminal Protector Provides a lead-free soft protective coating, Prolongs battery life, Assures easier starting.  Provides a wide range of applications protection from battery failure and starting difficulties. Easy to clean with a degreaser or brake cleaner product.

Battery Protector Applications:

Prolongs Battery Life

Assures Easier Starting

Protects Battery Terminals

Suitable for all vehicles including EV

Blue Sea Systems e-Series Single Circuit ON-OFF Switch

Features:

Ignition protected - safe for installation aboard gasoline powered boats

Case design allows surface or rear panel mounting

Meets American Boat and Yacht Council (ABYC) requirements for battery switches

Cranking Rating: 10 sec. 2,000 Amps

Intermittent Rating: 5 min. 600 Amps

Continuous Rating 350 Amps

Maximum Voltage Rating 48 Volts DC

Terminal Stud Size 3/8"-16 (M10)

Terminal Stud Torque 140 in-lb (15.82 Nm) max.

Mounting Holes Accept 1/4" (M6) Screw

Cable Size to Meet Ratings 4/0 AWG (95mm2)

Cable Clearance For 4/0 AWG Cables 1.10" (27.9mm)

Weight 0.95lb (0.43)

UL Listed - UL 1107 electric power switches

Meets American Boat and Yacht Council (ABYC) requirements

Meets UL 1500 and SAE J1171 external ignition protection requirements

Single Circuit ON/OFF

Click to Download Blue Sea's Battery Management Wiring Schematics

Blue Sea Systems e-Series Selector Battery Switch w/ AFD

Switches isolated battery banks to all loads or combines battery banks to all loads

Includes AFD (Alternator Field Disconnect)

Make-before-break contact design allows switching between battery banks without power interruption

Ignition protected—safe for installation aboard gasoline powered boats

Case design allows surface or rear panel mounting

Specifications:

Switch Type: Selector 4 Position

Color: Red

Switch Positions: 4

Battery Combine: Yes

Alternator Field Disconnect : Yes

Maximum Voltage: 32V DC

Continuous Rating:  350A

Intermittent Rating: 600A (5 min)

Cranking Rating 10 sec: 2000A

Cranking Rating 1 min: 1000A

Battery Inputs: 2

Cable Clearance For 4/0 AWG Cables: 1.10in (27.94 mm)

Cable Size to Meet Ratings: 4/0 AWG (120mm²)

Mounting Holes: Accept 1/4" (M6) Screw

Terminal Stud Size: 3/8"-16 (M10)

Terminal Stud Torque: 140 in-lb (15.82 Nm)

Weight: 1.30lb (0.59 kg)

Click here to download Blue Sea Systems E-Series Selevtor Battery Switch Manual