{"product_id":"tuff-coat-water-based-primer-for-aluminum-steel","title":"Tuff-Coat Marine Water-Based Primer for Aluminum \u0026 Steel","description":"\u003cp\u003eTuff-Coat Water-Based Primer for Aluminum \u0026amp; Steel\u003c\/p\u003e\u003cp\u003eTuffCoat's Aluminum \u0026amp; Steel Primer is a single-component water-based primer that is compatible with most high-performance finish coatings. This pre-mixed primer is designed specially for metal surfaces and provides excellent adhesion.\u003c\/p\u003e\u003cp\u003eKey Features:\u003c\/p\u003e\u003cp\u003ePre-Mixed\u003c\/p\u003e\u003cp\u003eWater Borne\u003c\/p\u003e\u003cp\u003eCorrosion-Inhibiting\u003c\/p\u003e\u003cp\u003eLow VOC\u003c\/p\u003e\u003cp\u003eExcellent Adhesion\u003c\/p\u003e\u003cp\u003eFast-Drying\u003c\/p\u003e\u003cp\u003eAbrasion-Resistant\u003c\/p\u003e\u003cp\u003eNon-Flammable\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eColor: Pink\u003c\/p\u003e\u003cp\u003eApplication Temperature: 55 Degrees Fahrenheit minimum - 95 Degrees Fahrenheit maximum\u003c\/p\u003e\u003cp\u003eRecommended Spreading Rate: Wet Mils: 4.0 | Dry Mils: 3.0\u003c\/p\u003e\u003cp\u003eCoverage: Approx. 250 sq. ft. \/ Gal. | 65 sq. ft. \/ Qt.\u003c\/p\u003e\u003cp\u003eApplication Instructions for Tuff-Coat Primer for Metals:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApproximate Drying Schedule\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eTo Touch: 1 hour\u003c\/p\u003e\u003cp\u003eTo Top Coat: 1-4 hours, not to exceed 48 hours\u003c\/p\u003e\u003cp\u003eTo Cure: 48 hours maximum. If maximum recoat time is exceeded, abrade surface before recoating.\u003c\/p\u003e\u003cp\u003eSurface Preparation\u003c\/p\u003e\u003cp\u003eAll surfaces must be clean and dry. Remove all loose particles, grease, or oily residues.\u003c\/p\u003e\u003cp\u003eRemove rust or paint by sandblasting, power brushing, or hand wire brushing before primer is applied.\u003c\/p\u003e\u003cp\u003eApplication\u003c\/p\u003e\u003cp\u003eSpray application is recommended. Limited applications can be applied by brush or roller.\u003c\/p\u003e\u003cp\u003eBrush: Nylon\/Polyester\u003c\/p\u003e\u003cp\u003eRoller: 3\/8\" woven with phenolic core\u003c\/p\u003e\u003cp\u003eSqueegee: Flat, rubber\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Tuff-Coat Water-Based Primer for Aluminum \u0026amp; Steel used for? Tuff-Coat Water-Based Primer for Aluminum \u0026amp; Steel is a pre-mixed, single-component water-based primer designed specifically for metal surfaces. It provides excellent adhesion and is compatible with most high-performance finish coatings. The primer also offers corrosion-inhibiting, abrasion-resistant, low-VOC, fast-drying, and non-flammable characteristics.\u003c\/li\u003e\n\u003cli\u003eWhat surfaces can Tuff-Coat Aluminum \u0026amp; Steel Primer be applied to? This Tuff-Coat primer is designed for aluminum and steel surfaces. Before application, surfaces must be clean and dry, with loose particles, grease, and oily residues removed. Rust or existing paint should be removed by sandblasting, power brushing, or hand wire brushing before applying the primer.\u003c\/li\u003e\n\u003cli\u003eWhat temperature range is recommended for applying Tuff-Coat Primer? Tuff-Coat Aluminum \u0026amp; Steel Primer should be applied at temperatures between 55°F and 95°F. Applying the primer outside this specified temperature range is not recommended based on the product instructions.\u003c\/li\u003e\n\u003cli\u003eHow long does Tuff-Coat Aluminum \u0026amp; Steel Primer take to dry? The primer is dry to the touch in approximately 1 hour. It can generally be top-coated after 1 to 4 hours, with the recoat time not exceeding 48 hours. Maximum cure time is 48 hours. If the maximum recoat time is exceeded, abrade the surface before recoating.\u003c\/li\u003e\n\u003cli\u003eHow should Tuff-Coat Primer for Metals be applied? Spray application is recommended for Tuff-Coat Aluminum \u0026amp; Steel Primer, although limited applications can be completed with a brush or roller. For brush application, use a nylon\/polyester brush. For roller application, use a 3\/8-inch woven roller with a phenolic core. A flat rubber squeegee can also be used.\u003c\/li\u003e\n\u003cli\u003eHow much area does Tuff-Coat Aluminum \u0026amp; Steel Primer cover? The recommended spreading rate is 4.0 wet mils and 3.0 dry mils. Approximate coverage is 250 square feet per gallon or 65 square feet per quart. Actual coverage may vary depending on the application and surface conditions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tuff-Coat Marine","offers":[{"title":"Gallon","offer_id":50584356978946,"sku":"TUF-UT-95G","price":167.69,"currency_code":"USD","in_stock":true},{"title":"Quart","offer_id":50584357011714,"sku":"TUF-UT-95Q","price":75.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/UT-95__06993.1722494211_edad91e6-da4d-4b61-95a0-d6bb15f09088.jpg?v=1791101858","url":"https:\/\/allmarineworld.com\/products\/tuff-coat-water-based-primer-for-aluminum-steel","provider":"All Marine World","version":"1.0","type":"link"}