{"product_id":"trac-7-liter-fluid-oil-pump","title":"Trac Outdoor 7 Liter Fluid Oil Pump","description":"\u003cp\u003eTRAC 7-Liter Marine Fluid\/Oil Change Pump\u003c\/p\u003e\u003cp\u003eThe TRAC 7-Liter Fluid\/Marine Oil Change Pump is intended to be used for oil changes and the removal of coolant, fuel, and transmission fluids. As with any self-priming pumps, this marine oil change pump creates a powerful vacuum to facilitate the removal of almost any non-corrosive liquid. It’s great for pumping out bilge water and other trapped boat fluids. This Marine Oil Change Pump provides a clean and efficient way to drain engines that have hard-to-reach drain plugs. This product is an ideal choice for any situation, particularly where draining oil is very difficult.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eSelf-Priming\u003c\/p\u003e\u003cp\u003eClamp Holds Tubes For Tidy Storage\u003c\/p\u003e\u003cp\u003eTank-Style Pumps with Two Different Sized Extraction Tubes\u003c\/p\u003e\u003cp\u003eIdeal For Nearly All Forms of Fluid Extraction\u003c\/p\u003e\u003cp\u003eIncludes Cap, Adapters and Hoses\u003c\/p\u003e\u003cp\u003eFor All Types of Motors, Watercraft and Vehicles\u003c\/p\u003e\u003cp\u003eHose Sizes:\u003c\/p\u003e\u003cp\u003eBlack Extraction Tube:\u003c\/p\u003e\u003cp\u003eOuter Diameter - 0.34 (11\/32)\"\u003c\/p\u003e\u003cp\u003eLength - 8'\u003c\/p\u003e\u003cp\u003eClean Drain Tube:\u003c\/p\u003e\u003cp\u003eInner Diameter - 0.50 (1\/2)\"\u003c\/p\u003e\u003cp\u003eLength - 8'\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eVolume: 7 Liters (7.5 Quarts)\u003c\/p\u003e\u003cp\u003eReplaces old TRAC part # T10064\u003c\/p\u003e\u003cp\u003e**Not for use with corrosive fluids, such as acids.\u003c\/p\u003e\u003cp\u003eHow to Use TRAC 7 Liter Marine Fluid\/Oil Extractor\u003c\/p\u003e\u003cp\u003eRun engine for 10 minutes to warm cold engine oil making it easier to pump.\u003c\/p\u003e\u003cp\u003eNote: The oil should not be hot. Do not attempt to extract hot oil.\u003c\/p\u003e\u003cp\u003eTurn off engine then remove the engine dipstick.\u003c\/p\u003e\u003cp\u003eInsert black tube into dipstick tube until it stops going in.\u003c\/p\u003e\u003cp\u003eAttach rubber tube coupler to pump inlet and push black tube end into the coupler about an inch.\u003c\/p\u003e\u003cp\u003eActuate pump handle for about 20 seconds. This will create a vacuum on the tank and begin to draw the oil.\u003c\/p\u003e\u003cp\u003eEvery few minutes you may need to actuate the pump for another 20 seconds to keep the vacuum strong.\u003c\/p\u003e\u003cp\u003eWhen the oil is completely pumped out, the vacuum will be released when air enters the black tube.\u003c\/p\u003e\u003cp\u003eIf the tank is full, remove extraction tube from the rubber tube coupler to stop the flow.\u003c\/p\u003e\u003cp\u003eRemove pump and tube from the dipstick tube.\u003c\/p\u003e\u003cp\u003eWipe off and coil both tubes and place in tube clamp.\u003c\/p\u003e\u003cp\u003eReplace dipstick, oil filter, and oil as recommended by engine manufacturer.\u003c\/p\u003e\u003cp\u003eDispose of oil at an oil recycling center.\u003c\/p\u003e","brand":"Trac Outdoor","offers":[{"title":"Default Title","offer_id":50584350621954,"sku":"TRC-69362","price":78.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/trc-t10064__50690.1558181321_6d28e23c-e8ec-4ef4-bd3e-96f0f6db8fe6.jpg?v=1791101843","url":"https:\/\/allmarineworld.com\/products\/trac-7-liter-fluid-oil-pump","provider":"All Marine World","version":"1.0","type":"link"}