{"product_id":"sea-hawk-monterey-bottom-paint","title":"Sea Hawk Monterey Bottom Paint","description":"\u003cp\u003eSea Hawk Monterey Water-Based Bottom Paint\u003c\/p\u003e\u003cp\u003eSea Hawk's Monterey Antifouling Paint is a water-based, semi-hard ablative coating for vessels of all sizes and hull substrates. This premium bottom paint has been a leader in environmentally friendly antifouling protection for over a decade. Monterey paint is easy to apply, emits low VOC's, and contains the highest grade of cuprous oxide available. Its semi-hard ablative properties means it lasts longer and self-polishes to keep your hull smooth and barnacle-free. Monterey is also the perfect paint for boats stowed out of the water because its antifouling power is not reduced by removal from the water. Sea Hawk Monterey Bottom Paint can be applied over most existing bottom paint in good condition.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eConsistent viscosity allows for a better flow and rolling ability\u003c\/p\u003e\u003cp\u003eLow VOC's and highest grade of cuprous oxide available\u003c\/p\u003e\u003cp\u003eSemi-Hard ablative finish to have lasting finishes on high speed vessels\u003c\/p\u003e\u003cp\u003eBetter color consistency for color matching\u003c\/p\u003e\u003cp\u003eMay be applied over most existing bottom paints\u003c\/p\u003e\u003cp\u003eProven to outperform other water-based paints\u003c\/p\u003e\u003cp\u003eEasy cleanup with soap and water\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Semi-gloss\u003c\/p\u003e\u003cp\u003eCopper Content: 54.67%\u003c\/p\u003e\u003cp\u003eVOC: 78 grams\/liter\u003c\/p\u003e\u003cp\u003eCoverage: 320 sq. ft.\/gal.\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3\u003c\/p\u003e\u003cp\u003eColors Available: 5545-Black, 5430-Dark Blue\u003c\/p\u003e\u003cp\u003ePack Size: 1 US Gallon\u003c\/p\u003e\u003cp\u003eHow to Apply Sea Hawk Monterey Bottom Paint\u003c\/p\u003e\u003cp\u003eSea Hawk Monterey Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using water. Monterey has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\u003cp\u003eFinish: Semi-Gloss\u003c\/p\u003e\u003cp\u003eCoverage:  320 Sq Ft\u003c\/p\u003e\u003cp\u003eApplication Method: Brush, Rolling, Airless Sprayer\u003c\/p\u003e\u003cp\u003eMaximum Roller Thickness: 3\/8” Nap\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2\u003c\/p\u003e\u003cp\u003eWet Film Thickness: 5.0 mils\u003c\/p\u003e\u003cp\u003eDry Film Thickness: 2.2 mils\u003c\/p\u003e\u003cp\u003eApplication Temp: 50° F Min\/ 95° F Max\u003c\/p\u003e\u003cp\u003eThinner: Water\u003c\/p\u003e\u003cp\u003eDrying Times\u003c\/p\u003e\u003cp\u003eSubstrate Temp.\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003eOvercoating Time (Min)\u003c\/p\u003e\u003cp\u003eOvercoating Time (Max)\u003c\/p\u003e\u003cp\u003eLaunch\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 hours\u003c\/p\u003e\u003cp\u003e1 hour\u003c\/p\u003e\u003cp\u003eN\/A\u003c\/p\u003e\u003cp\u003e12 hours\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1 hour\u003c\/p\u003e\u003cp\u003e1 hour\u003c\/p\u003e\u003cp\u003eN\/A\u003c\/p\u003e\u003cp\u003e12 hours\u003c\/p\u003e\u003cp\u003eSurface Preparation and Application\u003c\/p\u003e\u003cp\u003ePreviously Painted Surfaces\u003c\/p\u003e\u003cp\u003eKnown Compatibility of existing antifoulant\u003c\/p\u003e\u003cp\u003ePower wash to remove any loose paint or other contaminants.\u003c\/p\u003e\u003cp\u003eApply minimum 2 coats of Monterey. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/p\u003e\u003cp\u003eUnknown Compatibility of existing antifoulant\u003c\/p\u003e\u003cp\u003ePower wash to remove any loose paint or other contaminants.\u003c\/p\u003e\u003cp\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/p\u003e\u003cp\u003eApply 1 coat of 1277 Barrier coat primer or 1283 Island Primer\u003c\/p\u003e\u003cp\u003eApply minimum of two coats of Monterey. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/p\u003e\u003cp\u003ePoor condition of existing antifoulant\u003c\/p\u003e\u003cp\u003eIf previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.\u003c\/p\u003e\u003cp\u003eOnce stripped refer to the Bare Fiberglass Application Guidelines.\u003c\/p\u003e\u003cp\u003eBare Fiberglass\u003c\/p\u003e\u003cp\u003eTo prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush.\u003c\/p\u003e\u003cp\u003eUsing either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner scrub the surface and rinse thoroughly.\u003c\/p\u003e\u003cp\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/p\u003e\u003cp\u003eOnce cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.\u003c\/p\u003e\u003cp\u003eApply minimum of two coats of Monterey. Allow 3-6 hours between co…\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"5430\/GL","offer_id":50582211166466,"sku":"S-H-5430GL","price":243.59,"currency_code":"USD","in_stock":true},{"title":"5445\/GL","offer_id":50582211199234,"sku":"S-H-5445GL","price":243.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/866342_source_1751914233_789a9c01-d45b-4f0a-8bb2-64b72fad1d09.jpg?v=1791080719","url":"https:\/\/allmarineworld.com\/products\/sea-hawk-monterey-bottom-paint","provider":"All Marine World","version":"1.0","type":"link"}