{"product_id":"sea-hawk-cukote-bottom-paint","title":"Sea Hawk Cukote Bottom Paint","description":"\u003cp\u003eSea Hawk Cukote Bottom Paint\u003c\/p\u003e\u003cp\u003eSea Hawk's Cukote Bottom Paint is a self-polishing ablative paint that provides multi-season protection. Cukote Bottom Paint has a high load of cuprous oxide that makes this formula a top performer even in the most severe fouling areas. Due to its ablative and self-polishing nature, there is no buildup of bottom paint over time. The underwater surface of your hull remains clean and smooth, making this an ideal bottom paint for fast moving vessels. The copolymer in Cukote can withstand removal from water without affecting its antifouling properties. Sea Hawk's Cukote is the premium self-polishing antifouling paint that has established the standard in the industry.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eSemi-Hard, self-polishing ablative finish\u003c\/p\u003e\u003cp\u003eMulti-season performance\u003c\/p\u003e\u003cp\u003eRemoving boat from water does not affect antifouling properties\u003c\/p\u003e\u003cp\u003eEffective below the waterline on fiberglass, steel, and wood vessels\u003c\/p\u003e\u003cp\u003eNo TBT (organotin compounds)\u003c\/p\u003e\u003cp\u003e47.5% Cuprous oxide\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Semi-Gloss\u003c\/p\u003e\u003cp\u003eCopper Content: 47.57%\u003c\/p\u003e\u003cp\u003eVOC: 398 grams\/liter\u003c\/p\u003e\u003cp\u003eCoverage: 346 sq. ft.\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2\u003c\/p\u003e\u003cp\u003eColors Available: 3445-Black, 3441-Red, 3442-Blue, 3434-Teal\u003c\/p\u003e\u003cp\u003ePack Size: 1 US Gallon\u003c\/p\u003e\u003cp\u003eHow to Apply Sea Hawk Cukote Bottom Paint\u003c\/p\u003e\u003cp\u003eSea Hawk Cukote Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3\/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using water. Cukote has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\u003cp\u003eFinish: Semi-Gloss\u003c\/p\u003e\u003cp\u003eCoverage:  320 Sq Ft\u003c\/p\u003e\u003cp\u003eApplication Method: Bursh, Rolling, Airless Sprayer\u003c\/p\u003e\u003cp\u003eMaximum Roller Thickness: 3\/8” Nap\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2\u003c\/p\u003e\u003cp\u003eWet Film Thickness: 5.0 mils\u003c\/p\u003e\u003cp\u003eDry Film Thickness: 2.2 mils\u003c\/p\u003e\u003cp\u003eApplication Temp: 50° F Min\/ 95° F Max\u003c\/p\u003e\u003cp\u003eThinner: Maximum 10% Sea Hawk 2031 Reducer\u003c\/p\u003e\u003cp\u003eDrying Times\u003c\/p\u003e\u003cp\u003eSubstrate Temp.\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003eMinimum Overcoat Time\u003c\/p\u003e\u003cp\u003eMinimum Launch Time\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 hours\u003c\/p\u003e\u003cp\u003e1 hour\u003c\/p\u003e\u003cp\u003e12 hours\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1 hour\u003c\/p\u003e\u003cp\u003e1 hour\u003c\/p\u003e\u003cp\u003e12 hours\u003c\/p\u003e\u003cp\u003eSurface Preparation and Application\u003c\/p\u003e\u003cp\u003ePreviously Painted Surfaces\u003c\/p\u003e\u003cp\u003eKnown Compatibility of existing antifoulant\u003c\/p\u003e\u003cp\u003ePower wash to remove any loose paint or other contaminants.\u003c\/p\u003e\u003cp\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/p\u003e\u003cp\u003eApply minimum 2 coats of Cukote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/p\u003e\u003cp\u003eUnknown Compatibility of existing antifoulant\u003c\/p\u003e\u003cp\u003ePower wash to remove any loose paint or other contaminants.\u003c\/p\u003e\u003cp\u003eScuff sand with 80 grit sandpaper, remove all residue and let dry.\u003c\/p\u003e\u003cp\u003eApply 1 coat of 1277 Barrier coat primer or 1283 Island Primer\u003c\/p\u003e\u003cp\u003eApply minimum of two coats of Cukote. Allow 3-6 hours between coats and a minimum overnight dry.\u003c\/p\u003e\u003cp\u003ePoor condition of existing antifoulant\u003c\/p\u003e\u003cp\u003eIf previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting.\u003c\/p\u003e\u003cp\u003eOnce stripped refer to the Bare Fiberglass Application Guidelines.\u003c\/p\u003e\u003cp\u003eBare Fiberglass\u003c\/p\u003e\u003cp\u003eTo prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush.\u003c\/p\u003e\u003cp\u003eUsing either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch \u0026amp; Cleaner scrub the surface and rinse thoroughly.\u003c\/p\u003e\u003cp\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch \u0026amp; Cleaner\u003c\/p\u003e\u003cp\u003eOnce cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel.\u003c\/p\u003e\u003cp\u003eApply minimum of two coats of Cukote. Allow 3-6 hours between coats and a minimum\u003c\/p\u003e\u003cp\u003eSanding Method:\u003c\/p\u003e\u003cp\u003eSand to a uniform dull looking surface with 80-100 grit sandpaper …\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"3434\/GL","offer_id":50582209724674,"sku":"S-H-3434GL","price":362.99,"currency_code":"USD","in_stock":true},{"title":"3441\/GL","offer_id":50582209757442,"sku":"S-H-3441GL","price":362.99,"currency_code":"USD","in_stock":true},{"title":"3442\/GL","offer_id":50582209790210,"sku":"S-H-3442GL","price":362.99,"currency_code":"USD","in_stock":true},{"title":"3445\/GL","offer_id":50582209822978,"sku":"S-H-3445GL","price":362.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/866337_source_1751899418_64b10fbe-f5f7-448c-a23c-80a92e3dd28b.jpg?v=1791080715","url":"https:\/\/allmarineworld.com\/products\/sea-hawk-cukote-bottom-paint","provider":"All Marine World","version":"1.0","type":"link"}