{"product_id":"rule-automatic-800-gph-bilge-pump-20sa","title":"Rule Bilge Pump 800Gph-Auto","description":"\u003cp\u003eRule Automatic 800 GPH Bilge Pump 20SA\u003c\/p\u003e\u003cp\u003eRule offers the 800 GPH (3028 LPH) pump in a round version. This pump features many mounting variations as well as a gas resistant strainer base. Float switches are not required for these fully automatic pumps. Controlled via built-in sensors, the pump will turn on every 2.5 minutes for about 1 second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. Power use in the checking mode is minimal for the peace of mind that this range of pumps offer.\u003c\/p\u003e\u003cp\u003eThe pump is completely submersible and has a tough plastic body. It features back flow prevention to reduce the amount of water left over in the bilge. This reduces odor and helps keep the bilge cleaner. Hidden air vents within the body help prevent air locking in challenging plumbing situations and helps with the check valve. This model features a snap-lock strainer base which makes it easy to clean and a thermal cut-off for added protection. The threaded discharge provides easier installation and easier maintenance.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eIgnition protected\u003c\/p\u003e\u003cp\u003eLong-life motor\u003c\/p\u003e\u003cp\u003eCompletely submersible\u003c\/p\u003e\u003cp\u003eRust and corrosion protected\u003c\/p\u003e\u003cp\u003eSilent operation\u003c\/p\u003e\u003cp\u003eStainless steel shafts\u003c\/p\u003e\u003cp\u003eEasy-clean\u003c\/p\u003e\u003cp\u003eBack flow prevention\u003c\/p\u003e\u003cp\u003eThermal cut-off\u003c\/p\u003e\u003cp\u003eThreaded discharge\u003c\/p\u003e\u003cp\u003eMarine-grade blocked wiring\u003c\/p\u003e\u003cp\u003eNo burn-out when dry\u003c\/p\u003e\u003cp\u003eNo float switch needed\u003c\/p\u003e\u003cp\u003e3 year warranty\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eHeight: 4.7\"\u003c\/p\u003e\u003cp\u003eWidth: 2.9\"\u003c\/p\u003e\u003cp\u003eDepth: 2.5\"\u003c\/p\u003e\u003cp\u003eVolts: 12 DC\u003c\/p\u003e\u003cp\u003eAmp draw @ 12 V: 3.4\u003c\/p\u003e\u003cp\u003eAmp draw @ 13.6 V: 4.3\u003c\/p\u003e\u003cp\u003eFuse size: 7.5 amp\u003c\/p\u003e\u003cp\u003ePort size: 3\/4\" hose barb\u003c\/p\u003e\u003cp\u003eReplacement strainer: Model 1232R\u003c\/p\u003e\u003cp\u003ePanel switches: 41, 43, 45\u003c\/p\u003e\u003cp\u003eClick here for Rule 27SA Automatic Bilge Pump Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Rule Automatic 800 GPH Bilge Pump 20SA used for? The Rule Automatic 800 GPH Bilge Pump 20SA is a fully automatic, completely submersible bilge pump designed to remove water without requiring a separate float switch. Its built-in sensors periodically check for water, while the pump provides an 800 GPH (3028 LPH) capacity and features a 3\/4\" hose barb discharge.\u003c\/li\u003e\n\u003cli\u003eHow does the automatic sensing system work on the Rule 800 GPH Bilge Pump? The built-in sensors activate the pump approximately every 2.5 minutes for about 1 second to check for water. If water is present, the pump senses resistance and continues running until the water is removed. Power consumption remains minimal while the pump is in checking mode.\u003c\/li\u003e\n\u003cli\u003eDoes the Rule Automatic 800 GPH Bilge Pump require a float switch? No. The Rule Automatic 800 GPH Bilge Pump 20SA uses built-in sensors for automatic operation, so a separate float switch is not required. The product specifications also list compatibility with Rule panel switches 41, 43, and 45.\u003c\/li\u003e\n\u003cli\u003eWhat features help protect and maintain the Rule 800 GPH Bilge Pump? The pump features a thermal cut-off, stainless steel shaft, rust and corrosion protection, ignition protection, and a design specified to prevent burn-out when running dry. Its snap-lock strainer base makes cleaning easier, while the threaded discharge simplifies installation and maintenance.\u003c\/li\u003e\n\u003cli\u003eHow does the Rule 800 GPH Bilge Pump help reduce water and air locking? The pump uses backflow prevention to reduce the amount of water remaining in the bilge, which helps reduce odor and keep the bilge cleaner. Hidden air vents within the pump body help prevent air locking in challenging plumbing situations and assist with the check valve.\u003c\/li\u003e\n\u003cli\u003eWhat are the electrical and dimensional specifications of the Rule Automatic 800 GPH Bilge Pump? The Rule 800 GPH Bilge Pump operates at 12 DC and draws 3.4 amps at 12 V or 4.3 amps at 13.6 V. It requires a 7.5 amp fuse and has a 3\/4\" hose barb. The pump measures 4.7\" high, 2.9\" wide, and 2.5\" deep.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rule","offers":[{"title":"Default Title","offer_id":50582008692994,"sku":"RUL-20SA","price":175.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/20SA__53903.1722499535_aea34c46-cfbe-412b-8e1c-11aa9fbc584b.jpg?v=1791080268","url":"https:\/\/allmarineworld.com\/products\/rule-automatic-800-gph-bilge-pump-20sa","provider":"All Marine World","version":"1.0","type":"link"}