{"product_id":"phender-pro-quick-release-fender-receiver","title":"Big Sky Precision Phender Pro Quick Release Fender Receiver","description":"\u003cp\u003ePhender Pro Quick Release Fender Receiver\u003c\/p\u003e\u003cp\u003eThe Phender Pro Quick Release Fender Receiver makes docking quick, easy, and hassle-free. This durable receiver is machined from 316 stainless steel for maximum corrosion resistance. The Phender Pro Quick Release Fender Receiver includes both the stainless steel receiver and a brass nut plate. This receiver is easy to install with the Phender Pro Install Tool (sold separately).\u003c\/p\u003e\u003cp\u003eFor a 24' boat, it is recommended to purchase (2) Phender Pro Quick Release Fender Cleats, (1) Phender Pro Quick Release Fender Receiver, and (1) Phender Pro Install Tool.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003e316 Stainless steel receiver\u003c\/p\u003e\u003cp\u003eBrass nut plate\u003c\/p\u003e\u003cp\u003eMade in the USA\u003c\/p\u003e\u003cp\u003eSizes Available:\u003c\/p\u003e\u003cp\u003e1\/2\"\u003c\/p\u003e\u003cp\u003e3\/8\"\u003c\/p\u003e\u003cp\u003ePhender Pro Install Tool is required for installation\u003c\/p\u003e\u003cp\u003eRecommended Tools for the Installation Process:\u003c\/p\u003e\u003cp\u003eMarine Grade silicone\u003c\/p\u003e\u003cp\u003eLoctite (Blue)\u003c\/p\u003e\u003cp\u003eDust rag\u003c\/p\u003e\u003cp\u003e3\/8\" Allen wrench\u003c\/p\u003e\u003cp\u003ePainter tape\u003c\/p\u003e\u003cp\u003ePencil\u003c\/p\u003e\u003cp\u003eNew 1\" Drill Bit (Spade Bit, Hole Saw, or Multi-Tooth Forstner Bit)\u003c\/p\u003e\u003cp\u003ePhender Pro Install Tool (1\/2\" or 3\/8\" depending on which Phender Pro Receiver you purchase)\u003c\/p\u003e\u003cp\u003ePre-Installation:\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePrior to installation, you will need to figure out where you will be installing your Phender Pro Receivers. Consider the following:\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eEach fender should be in the right location to fend off the boat.\u003c\/p\u003e\u003cp\u003eUse the Locator Disk (included) to insure the hole will be drilled in a flat area. See the diagram below.\u003c\/p\u003e\u003cp\u003eBe sure to check behind where the hole will be drilled for structural pieces, cables, etc.\u003c\/p\u003e\u003cp\u003ePut the receivers om the same spot on each side of the boat.\u003c\/p\u003e\u003cp\u003eOnce you have decided on where to place your Phender Pro Quick Release Receivers, it's time to drill the holes.\u003c\/p\u003e\u003cp\u003eUsing the Locator Disk, mark dead center of the receiver with a pencil.\u003c\/p\u003e\u003cp\u003e1\/2\" Receiver = 1\" Hole\u003c\/p\u003e\u003cp\u003e3\/8\" Receiver = 3\/4\" Hole\u003c\/p\u003e\u003cp\u003eCenter punch each hole so the drill won't wander (a small nail can substitute for a center punch).\u003c\/p\u003e\u003cp\u003eDrill the hole from the outside toward the inside. Be sure to stop about a third of the way through.\u003c\/p\u003e\u003cp\u003eUse the hole in the center to drill from the inside just enough to score the fiberglass.\u003c\/p\u003e\u003cp\u003eNote: Always finish drilling from the outside. This will minimize the risk of chipping the gel-coat.\u003c\/p\u003e\u003cp\u003eInstalling the Receiver:\u003c\/p\u003e\u003cp\u003eClean inside and outside surfaces\u003c\/p\u003e\u003cp\u003eScrew install tool into the brass nut plate\u003c\/p\u003e\u003cp\u003eRemove protective film from adhesive tape\u003c\/p\u003e\u003cp\u003ePivot nut plate, insert in hole, pivot back and pull several times to adhere tape on back side of fiberglass\u003c\/p\u003e\u003cp\u003eUnscrew install tool\u003c\/p\u003e\u003cp\u003eApply marine grade silicone to underside of receiver head\u003c\/p\u003e\u003cp\u003eApply Loctite to receiver threads, screw into brass nut plate and tighten with Allen wrench\u003c\/p\u003e\u003cp\u003eFor more information regarding installation, refer to the video above. Each Phender Pro product comes with installation instructions included.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Phender Pro Quick Release Fender Receiver used for? The Phender Pro Quick Release Fender Receiver is designed to make docking easier by providing a receiver for the Phender Pro quick-release fender system. It is machined from 316 stainless steel and includes a brass nut plate. The receiver is available in 1\/2\" and 3\/8\" sizes.\u003c\/li\u003e\n\u003cli\u003eWhat sizes of Phender Pro Quick Release Fender Receiver are available? The Phender Pro Quick Release Fender Receiver is available in 1\/2\" and 3\/8\" sizes. The corresponding Phender Pro Install Tool must match the receiver size, so select a 1\/2\" or 3\/8\" installation tool based on the receiver purchased.\u003c\/li\u003e\n\u003cli\u003eWhat is included with the Phender Pro Quick Release Fender Receiver? Each Phender Pro Quick Release Fender Receiver includes a 316 stainless steel receiver and a brass nut plate. A Locator Disk is also included for positioning the receiver during installation. The Phender Pro Install Tool is required for installation but is sold separately.\u003c\/li\u003e\n\u003cli\u003eWhat tools and materials are needed to install the Phender Pro Quick Release Fender Receiver? Installation requires the correctly sized Phender Pro Install Tool, marine-grade…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Big Sky Precision","offers":[{"title":"1\/2\"","offer_id":50581554725122,"sku":"BSP-BSPA-1181","price":59.99,"currency_code":"USD","in_stock":true},{"title":"3\/8\"","offer_id":50581554757890,"sku":"BSP-BSPA-1185","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/1__09112.1763741621.jpg?v=1791077150","url":"https:\/\/allmarineworld.com\/products\/phender-pro-quick-release-fender-receiver","provider":"All Marine World","version":"1.0","type":"link"}