{"product_id":"pettit-unepoxy-hrt-bottom-paint","title":"Pettit Paint Unepoxy HRT Bottom Paint","description":"\u003cp\u003ePettit Unepoxy HRT Bottom Paint\u003c\/p\u003e\u003cp\u003ePettit Unepoxy HRT is formulated to provide outstanding protection at a very affordable price. Unepoxy HRT has a smooth durable finish that is able to withstand beaching, trailering, and season long abuse. This antifouling paint uses the latest technology available to create a hybrid paint film that's strong enough to handle the tough marine environment without building up over time.\u003c\/p\u003e\u003cp\u003eHRT: Hybrid Reactive Technology features high density biocide utilization to maximize effectiveness, along with film modifiers to reduce yearly build-up, maintain color consistency, and lower weight.\u003c\/p\u003e\u003cp\u003eKey Features:\u003c\/p\u003e\u003cp\u003eSeasonal antifouling\u003c\/p\u003e\u003cp\u003eEconomical hybrid protection\u003c\/p\u003e\u003cp\u003eSmooth durable polishing finish\u003c\/p\u003e\u003cp\u003eCompatible over most bottom paints\u003c\/p\u003e\u003cp\u003eDurable finish withstands beaching, trailering, and season long abuse\u003c\/p\u003e\u003cp\u003eColors Available: 1211 Blue, 1311 Green, 1611 Red, 1811 Black\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHow Much Pettit Unepoxy HRT Do I Need for My Boat? Refer to the chart below to calculate how much Unepoxy HRT paint you will need for your boat.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/p\u003e\u003cp\u003eDivide that number (your square foot total) by the amount of coverage Unepoxy HRT provides. (500 square foot per gallon). This will give you a one-coat total.\u003c\/p\u003e\u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Unepoxy HRT has a coverage of 500 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e\u003cp\u003eHow to Apply Pettit Unepoxy HRT\u003c\/p\u003e\u003cp\u003eUnepoxy HRT is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 5-10% using 120 Brushing Thinner. Unepoxy HRT has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in.\u003c\/p\u003e\u003cp\u003eFinish: Flat\u003c\/p\u003e\u003cp\u003eCoverage: 500 ft2\/gal\u003c\/p\u003e\u003cp\u003eApplication Method: Brush, roller, airless or conventional spray\u003c\/p\u003e\u003cp\u003eMaximum Roller Thickness: 3\/16\"\u003c\/p\u003e\u003cp\u003eNumber of Coats: 1 minimum per season with additional coat at waterline\u003c\/p\u003e\u003cp\u003eWet Film Thickness: 3.75 mils\u003c\/p\u003e\u003cp\u003eDry Film Thickness: 1.5 mils\u003c\/p\u003e\u003cp\u003eApplication Temp: 50°F Min. \/ 90°F Max\u003c\/p\u003e\u003cp\u003eThinner: 120 Brushing Thinner\u003c\/p\u003e\u003cp\u003e**Do not apply Unepoxy HRT on aluminum hulls or outdrives**\u003c\/p\u003e\u003cp\u003ePreviously Painted Surfaces\u003c\/p\u003e\u003cp\u003eFor old hard and ablative bottom paints, begin by thoroughly wiping down the surface with 120 Brushing Thinner. Pay extra attention to waterline areas. Then sand the painted surface with 80 grit sandpaper.\u003c\/p\u003e\u003cp\u003eOld tin or copper copolymers, or Teflon-based antifouling paints should be sanded thoroughly with 80 grit sandpaper to remove the chalky outer surface. Wipe clean ten apply one coat of Unepoxy HRT.\u003c\/p\u003e\u003cp\u003eSoft, sloughing antifouling paints should be removed before applying Unepoxy HRT.\u003c\/p\u003e\u003cp\u003eBare Fiberglass\u003c\/p\u003e\u003cp\u003eAll bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D-95 Dewaxer.\u003c\/p\u003e\u003cp\u003eNon-Sanding Method (1): Prep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit D95 Dewaxer. Then apply one thin coat of Pettit 6998 Skip- Sand Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three thin coats of Unepoxy HRT.\u003c\/p\u003e\u003cp\u003eNon-Sanding Method (2): Thoroughly clean, de-wax and etch the surface with 92 Bio-Blue Hull Surface Prep using a course Scotch-Brite pad in a swirling motion. Thoroughly rinse all residue from…\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"1131106","offer_id":50581926052098,"sku":"PET-1311G","price":172.8,"currency_code":"USD","in_stock":true},{"title":"1161106","offer_id":50581926084866,"sku":"PET-1611G","price":172.8,"currency_code":"USD","in_stock":true},{"title":"1181106","offer_id":50581926117634,"sku":"PET-1811G","price":169.2,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":50581926150402,"sku":"PET-1211G","price":172.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/865752_source_1751897359_6b650666-40a0-49a4-a28b-9862820006c9.jpg?v=1791079936","url":"https:\/\/allmarineworld.com\/products\/pettit-unepoxy-hrt-bottom-paint","provider":"All Marine World","version":"1.0","type":"link"}