{"product_id":"pettit-rustlok-steel-anti-corrosive-marine-primer","title":"Pettit Paint Rustlok Steel Anti-Corrosive Marine Primer","description":"\u003cp\u003ePettit Rustlok Steel Anti-Corrosive Paint\u003c\/p\u003e\u003cp\u003ePettit Rustlok is a one package moisture cured polyurethane coating designed for application over any steel or cast iron surface, including galvanized and stainless steel. Rustlok Steel Primer contains aluminum flake pigment which forms a dense, water impervious barrier. The result is excellent corrosion protection. In addition, Rustloks polyurethane chemistry offers tremendous adhesive strength and wetting ability. It is this combination that allows Rustlok to perform well even when applied over rusted surfaces. Rustlok is recommended anytime an easy to apply, effective anti-corrosive barrier coat is desired.\u003c\/p\u003e\u003cp\u003eDries rapidly allowing multiple coats in one day.\u003c\/p\u003e\u003cp\u003eWets, seals and adheres to firmly attached rust.\u003c\/p\u003e\u003cp\u003eMay be applied at temperatures down to 10°F.\u003c\/p\u003e\u003cp\u003eExceptional adhesion to all ferrous metals also including steel, cast iron, galvanized and stainless steel.\u003c\/p\u003e\u003cp\u003ePettit Brush Thinner: Use for brushing, rolling and clean-up\u003c\/p\u003e\u003cp\u003eAll Pettit, Z*Spar or Shipendec topside finishes are compatible with Rustlok. If the surface is sufficiently smooth, Pettit, Z*Spar or Shipendec enamels may be applied directly over Rustlok.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eColor: Aluminum metallic\u003c\/p\u003e\u003cp\u003eCoverage: Approx. 350 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eNumber of Coats: 3 Minimum\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow To Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION DATA METHOD: Brush, Roller or Spray\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: 3 Min.\u003c\/p\u003e\u003cp\u003eDRY FILM THICKNESS PER COAT: 2 mils\u003c\/p\u003e\u003cp\u003eCOVERAGE: 350 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eAPPLICATION TEMP: 10°F Min. \/ 90°F Max.\u003c\/p\u003e\u003cp\u003eTime to Recoat\u003c\/p\u003e\u003cp\u003e10°F\u003c\/p\u003e\u003cp\u003e3 HRS\u003c\/p\u003e\u003cp\u003e30°F\u003c\/p\u003e\u003cp\u003e2-1\/2 HRS\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e2 HRS\u003c\/p\u003e\u003cp\u003e70°F\u003c\/p\u003e\u003cp\u003e1-1\/2 HRS\u003c\/p\u003e\u003cp\u003e90°F\u003c\/p\u003e\u003cp\u003e30 MIN\u003c\/p\u003e\u003cp\u003eTHINNER: 120 Brushing\u003c\/p\u003e\u003cp\u003eNEW STEEL: Disc sand with 80 grit sandpaper or sandblast to clean bright metal. Wipe clean with Pettit 120 Brushing Thinner and immediately apply at least three coats of Rustlok following the recoat instructions carefully. Finish with antifouling bottom paint or topside system.\u003c\/p\u003e\u003cp\u003eRUSTED STEEL: Clean the surface by wire brushing, wire wheeling, or light sandblasting. All loose rust must be removed. Firmly attached rust does not have to be removed. Wipe the surface clean with Pettit 120 Brushing Thinner and apply a minimum of three coats of Rustlok. Finish with epoxy primer, an appropriate antifouling bottom paint or topside system.\u003c\/p\u003e\u003cp\u003eGALVANIZED STEEL: Galvanized steel must be clean and free of oil or grease before it is painted. Thoroughly clean the surface with Pettit 120 Brushing Thinner and plenty of clean rags to ensure complete removal of contaminants. Then apply a minimum of three coats of Rustlok. Finish with antifouling bottom paint or topside system.\u003c\/p\u003e\u003cp\u003eSTAINLESS STEEL: Follow the \"New Steel\" system above.\u003c\/p\u003e\u003cp\u003eDO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: Rustlok Steel Primer may be applied by brush, roller or spray. A minimum of three coats of Rustlok is recommended to achieve good, long-term corrosion protection. Four or more coats of Rustlok will yield excellent long-term results. Rustlok reacts with ambient moisture. To avoid gelation of the paint, keep containers tightly sealed when not in use. Thinning is not normally required and is not recommended. Follow the recommended dry time and recoat guidelines carefully. Once fully cured, Rustlok forms an extremely hard surface which is very difficult for other coatings to adhere to. If the dry to recoat time is exceeded, heavy sanding with 80 grit sandpaper is mandatory to achieve proper adhesion of subsequent coats of paint. To eliminate the labor of sanding, plan your work carefully so that each coat of Rustlok and the first application of topcoat (antifouling or topside enamel) will be done before the previous coat dries hard.\u003c\/p\u003e\u003cp\u003eTOPCOATS:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eANTIFOULING BOTTOM PAINT: All Pettit antifouling bottom paints may be applied directly over Rustlok. Adhesion is always best when Rustlok is topcoated when it is …\u003c\/li\u003e\u003c\/ul\u003e","brand":"Pettit Paint","offers":[{"title":"Gallon","offer_id":50581930443010,"sku":"PET-6980G","price":206.29,"currency_code":"USD","in_stock":false},{"title":"Quart","offer_id":50581930475778,"sku":"PET-6980Q","price":74.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/386222_source_1647352002_18dffbfb-d511-41ce-93c9-0dd6ed0ed056.jpg?v=1791079979","url":"https:\/\/allmarineworld.com\/products\/pettit-rustlok-steel-anti-corrosive-marine-primer","provider":"All Marine World","version":"1.0","type":"link"}