{"product_id":"pettit-inflatable-boat-bottom-paint","title":"Pettit Paint INFLATABLE BOAT PAINT BLACK 1841Q","description":"\u003cp\u003ePettit Inflatable Boat Bottom Paint\u003c\/p\u003e\u003cp\u003ePettit's Inflatable Boat Bottom Paint is a water-based paint that provides multi-season protection against algae, barnacles, and all types of marine and fresh water fouling. Its water-based formula results in a product that is easy to apply, environmentally responsive, and is safer to use. This bottom paint exceeds even the most stringent air pollution (VOC) regulations. Pettit's Inflatable Boat Bottom Paint withstands frequent trailering, beaching, and launching while offering excellent antifouling protection. This paint is resistant to cracking, peeling, and flaking and is suitable for use on PVC or Hypalon.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eWater-based formula\u003c\/p\u003e\u003cp\u003eAblative technology eliminates sanding and paint build-up\u003c\/p\u003e\u003cp\u003eEnvironmentally friendly, easy to apply and cleanup with soap \u0026amp; water\u003c\/p\u003e\u003cp\u003eUnlimited dry time to launch - can be painted in fall or winter\u003c\/p\u003e\u003cp\u003eComplies with all air pollution (VOC) regulations\u003c\/p\u003e\u003cp\u003eContains PTFE which reduces drag\u003c\/p\u003e\u003cp\u003eSold in quarts\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eColor: Black\u003c\/p\u003e\u003cp\u003eFinish: Flat\u003c\/p\u003e\u003cp\u003eCoverage: 430 sq. ft\/gal\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2 Minimum\u003c\/p\u003e\u003cp\u003eApplication Methods: Brush, roller, airless or conventional spray\u003c\/p\u003e\u003cp\u003eVOC: 150 g\/l max.\u003c\/p\u003e\u003cp\u003eBiocide: Cuprous Oxide 25.25%\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePettit 120 Brushing Thinner - For surface prep\u003c\/li\u003e\n\u003cli\u003ePettit 97 Epoxy Thinner - For surface prep\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHow to Apply Pettit Inflatable Boat Bottom Paint\u003c\/p\u003e\u003cp\u003ePettit's Inflatable Boat Bottom paint is very easily applied by brush, roller, or spray. It is necessary to thoroughly mix Pettit Inflatable Boat Bottom Paint prior to application. Before using, check sides and bottom of can to make sure all the pigment has been mixed in. When rolling, thin the paint approximately 5-10% with clean fresh water and wet the surface to be painted with clean fresh water as well. This aids the \"hold out\" of the coating, resulting in truer color and smoother finish.\u003c\/p\u003e\u003cp\u003eApplication Methods: Brush, Roller, Airless or Conventional Spray.\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2 minimum with additional coat at waterline recommended.\u003c\/p\u003e\u003cp\u003eDry Film Thickness: 1.5 mils (3.75 wet mils)\u003c\/p\u003e\u003cp\u003eCoverage: 430 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eApplication Temp: 50°F Min. \/ 90°F Max.\u003c\/p\u003e\u003cp\u003eThinner: Clean, fresh water\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003eTo Launch\u003c\/p\u003e\u003cp\u003e90°F\u003c\/p\u003e\u003cp\u003e1\/4 HR\u003c\/p\u003e\u003cp\u003e1 HR\u003c\/p\u003e\u003cp\u003e12 HR\u003c\/p\u003e\u003cp\u003e70°F\u003c\/p\u003e\u003cp\u003e1\/2 HR\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e16 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e1 HR\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e48 HR\u003c\/p\u003e\u003cp\u003eApplication Systems\u003c\/p\u003e\u003cp\u003eRubberized Fabric Surfaces\u003c\/p\u003e\u003cp\u003eWash surface to be painted with a mild detergent and water solution, then rinse thoroughly with clean water. Allow to dry.\u003c\/p\u003e\u003cp\u003ePour a moderate amount of of 97 Epoxy Thinner onto a bronze wood pad.\u003c\/p\u003e\u003cp\u003eChoose a small area and scrub the surface lightly but thoroughly. Wipe off any excess 97 Epoxy Thinner.\u003c\/p\u003e\u003cp\u003eRepeat the process until the entire surface to be painted has been scrubbed and wiped clean.\u003c\/p\u003e\u003cp\u003eApply a generous coat of Inflatable Boat Bottom Paint.\u003c\/p\u003e\u003cp\u003eAllow the paint to dry to recoat and apply a second full coat.\u003c\/p\u003e\u003cp\u003eFiberglass Surfaces\u003c\/p\u003e\u003cp\u003eWash the fiberglass with Pettit 97 Epoxy Thinner to remove grease and dirt.\u003c\/p\u003e\u003cp\u003eSand thoroughly with 80 grit sandpaper to a dull, frosty finish.\u003c\/p\u003e\u003cp\u003eRewash sanded surface with 97 Epoxy Thinner.\u003c\/p\u003e\u003cp\u003eApply at least two coats of Inflatable Boat Bottom Paint.\u003c\/p\u003e\u003cp\u003ePreviously Coated Surfaces\u003c\/p\u003e\u003cp\u003eTo repaint surfaces painted with this product:\u003c\/p\u003e\u003cp\u003eScrub the finish with an abrasive pad and recoat with a fresh coat of Inflatable Boat Bottom Paint.\u003c\/p\u003e\u003cp\u003eTo paint old, hard antifoulings:\u003c\/p\u003e\u003cp\u003eThoroughly wipe down the surface with 120 Brushing Thinner.\u003c\/p\u003e\u003cp\u003eSand surface with 80 grit sandpaper. Wipe clean with 120 Brushing Thinner.\u003c\/p\u003e\u003cp\u003eApply Inflatable Boat Bottom Paint.\u003c\/p\u003e\u003cp\u003eTo paint old tin or copper copolymers or Teflon-based paints:\u003c\/p\u003e\u003cp\u003eSand thoroughly with 80 grit sandpaper to remove chalky outer surface.\u003c\/p\u003e\u003cp\u003eWipe clean of sanding residue.\u003c\/p\u003e\u003cp\u003eOvercoat directly with Inflatable Boat Bottom Paint.\u003c\/p\u003e\u003cp\u003eTraditional, soft antifoulings should be removed before applying Inflatab…\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Default Title","offer_id":50581927330050,"sku":"PET-1841Q","price":86.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/7a3f50f7-d0e0-490e-8a17-4e97f69fe811__83819.1780061446_4f5275cb-0d1b-4e47-95ad-1c6706769109.jpg?v=1791079956","url":"https:\/\/allmarineworld.com\/products\/pettit-inflatable-boat-bottom-paint","provider":"All Marine World","version":"1.0","type":"link"}