{"product_id":"pettit-flagship-varnish","title":"Pettit Paint Flagship Varnish","description":"\u003cp\u003ePettit Flagship Varnish\u003c\/p\u003e\u003cp\u003eAs the sun’s rays can create havoc with a boat's finish, Pettit Flagship Varnish offers 6 times more UV inhibitors delivering unequaled protection against the sun's damaging rays. A unique blend of phenolic and alkyd resins combined with tung and linseed oils provide excellent performance as well as a warm, light amber hue. Pettit Flagship Varnish has an ultraviolet light filter along with a light stabilizer that effectively screens the damaging rays of the sun for longer-lasting life. Pettit Flagship Varnish enjoys the highest build and film depth per coat and serves as excellent abrasion resistance along with its high gloss finish.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eTraditional warm, amber hue with outstanding gloss retention\u003c\/p\u003e\u003cp\u003eHighest build and film depth per coat\u003c\/p\u003e\u003cp\u003eHighest level of U.V. protection\u003c\/p\u003e\u003cp\u003eExtremely durable finish\u003c\/p\u003e\u003cp\u003eEasy to apply\u003c\/p\u003e\u003cp\u003eWhen applying to bare wood, a minimum of four (4) coats is required, and when applying over existing varnish, a minimum of two (2) coats is required. Pettit Flagship Varnish should be applied in a slightly heavier coat of up to 4 wet-mils. Coats should be allowed to dry overnight before sanding or recoating.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eCoverage: 450 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eMethod: Brush or Spray\u003c\/p\u003e\u003cp\u003eNumber of Coats: Bare Wood: 4 minimum  |  Existing Varnish: 2 minimum\u003c\/p\u003e\u003cp\u003eVOC: 420 grams\/liter\u003c\/p\u003e\u003cp\u003eSizes Available: 1 US Quart, 1 US Gallon\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cp\u003ePettit Brush Thinner -For brushing and clean up\u003c\/p\u003e\u003cp\u003ePettit Spray Thinner -Spraying Application\u003c\/p\u003e\u003cp\u003ePettit EZ-Wood Sealer- For surface preparation on bare wood\u003c\/p\u003e\u003cp\u003eHow to Apply Pettit Flagship Varnish\u003c\/p\u003e\u003cp\u003ePettit Flagship High Build Varnish may be applied by brush, conventional or airless spray. Thinning is not normally required although on warm days use Pettit 120 Brushing Thinner at 5-10% by volume to ease brushing and maintain good flow and leveling. When spraying, use Pettit 121 Spraying Thinner up to 20% by volume.\u003c\/p\u003e\u003cp\u003eApplication Method: Brush or Spray\u003c\/p\u003e\u003cp\u003eNumber of Coats: Bare Wood: 4 minimum | Existing Varnish: 2 minimum\u003c\/p\u003e\u003cp\u003eApplication Temp: 45°F Minimum | 90°F Maximum\u003c\/p\u003e\u003cp\u003eThinners: 120 Brushing Thinner | 121 Spraying Thinner\u003c\/p\u003e\u003cp\u003eCoverage: 450 sq. ft. \/gal.\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemperature\u003c\/p\u003e\u003cp\u003eSet-to-Touch\u003c\/p\u003e\u003cp\u003eTack Free\u003c\/p\u003e\u003cp\u003eDry Hard\u003c\/p\u003e\u003cp\u003e90°F\u003c\/p\u003e\u003cp\u003e1-3 hrs\u003c\/p\u003e\u003cp\u003e4-6 hrs\u003c\/p\u003e\u003cp\u003e8-12 hrs\u003c\/p\u003e\u003cp\u003e70°F\u003c\/p\u003e\u003cp\u003e2-4 hrs\u003c\/p\u003e\u003cp\u003e6-8hrs\u003c\/p\u003e\u003cp\u003e16-20 hrs\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e4-8 hrs\u003c\/p\u003e\u003cp\u003e12-16 hrs\u003c\/p\u003e\u003cp\u003e24-48 hrs\u003c\/p\u003e\u003cp\u003eSURFACE PREPARATION AND APPLICATION:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBare Wood\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eSand surface completely smooth with 180-320 grit production paper. Wipe surface to remove sanding residue with a tack rag or rag dampened with Pettit 120 Brushing Thinner.\u003c\/p\u003e\u003cp\u003eFor new work on open grained wood such as mahogany, oak, ash, ect. The use of Pettit or Z-Spar Paste Wood Filler Stain is required to achieve a smooth finish. Let dry overnight.\u003c\/p\u003e\u003cp\u003eFor new work on close grained woods such as pine, maple, spruce, ect. The use of Pettit or Z-Spar Paste Wood Filler Stain is not normally required.\u003c\/p\u003e\u003cp\u003eApply a generous covering coat of Pettit 2018 Clear Sealer and let it dry overnight. Sand thoroughly with 220 grit sandpaper.\u003c\/p\u003e\u003cp\u003eOn especially rough or porous wood, a second coat of 2018 Clear Sealer may be applied.\u003c\/p\u003e\u003cp\u003eIf applied, sand the second coat as well and wipe the surface clean with a tack rag or rag dampened with Pettit 120 Brushing Thinner.\u003c\/p\u003e\u003cp\u003eApply at least 4 coats of Z-Spar 1015 Flagship Varnish.\u003c\/p\u003e\u003cp\u003eLet each coat dry overnight, sand with 220 grit sandpaper, and clean off sanding residue with a tack rag before applying the next coat.\u003c\/p\u003e\u003cp\u003eSand the next to last coat with 400 grit production paper and clean off sanding residue before applying the final coat.\u003c\/p\u003e\u003cp\u003eVarnished Wood\u003c\/p\u003e\u003cp\u003eIn Good Condition\u003c\/p\u003e\u003cp\u003eWipe old varnish with Pettit 120 Brushing Thinner to be sure all dirt, polish and\/or grease has been removed.\u003c\/p\u003e\u003cp\u003eThoroughly sand the existing varnish with 180-220 grit production paper and wipe clean.\u003c\/p\u003e\u003cp\u003eApply at least 2 coats of Z-Spar 1015 Flags…\u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"8720106","offer_id":50581927559426,"sku":"PET-2015G","price":252.79,"currency_code":"USD","in_stock":true},{"title":"8720108","offer_id":50581927592194,"sku":"PET-2015Q","price":89.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Flagship_Varnish__75155.1737842849_ae60f654-5688-4679-9910-902f9dc497f8.jpg?v=1791079960","url":"https:\/\/allmarineworld.com\/products\/pettit-flagship-varnish","provider":"All Marine World","version":"1.0","type":"link"}