{"product_id":"pettit-ez-wood-sealer","title":"Pettit Paint EZ-Wood Sealer","description":"\u003cp\u003ePettit EZ-Wood Sealer\u003c\/p\u003e\u003cp\u003eMarine wood sealers are used to seal raw wood surfaces to help prep for painting and varnishing. Boat wood sealers help to provide a more uniform surface for applying other finishing products such as topside or bottom paints.\u003c\/p\u003e\u003cp\u003ePettit EZ Marine Wood Sealer is formulated to work on all types of wood surfaces and provides a moisture barrier to help stop peeling. Boat wood sealers prevent primers, paints, and varnishes from being absorbed into the wood surface. Pettit marine wood sealer is easy to apply on all types of wood surfaces such as teak and mahogany. Once boat wood sealer is applied, it is recommended that you sand the surface before applying finishing products such as topside primers or paints. Pettit EZ-Wood Sealer is safe to use under all Pettit, Z-Spar, and Shipendec products.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eSeals open wood grain providing a more uniform finish\u003c\/p\u003e\u003cp\u003eFor all woods including teak, mahogany, oak, ash, fir, and plywood\u003c\/p\u003e\u003cp\u003ePrevents excessive vehicle absorption from primers, paints, or varnishes\u003c\/p\u003e\u003cp\u003eExcellent penetration into raw wood for improved stability and moisture resistance\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eColor: Clear Amber\u003c\/p\u003e\u003cp\u003eCoverage: 500 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eMethod: Brush, Airless or Conventional Spray\u003c\/p\u003e\u003cp\u003eNumber of Coats: One or two\u003c\/p\u003e\u003cp\u003eVOC: 419 g\/l as supplied\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePettit Brush Thinner: For brush application. Also used as a thinner on very hot days at 5-10% by volume.\u003c\/li\u003e\n\u003cli\u003ePettit Spray Thinner: For spray application. Use up to 20% by volume.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHow to Apply Pettit EZ Wood Sealer\u003c\/p\u003e\u003cp\u003eMake sure to stir EZ Wood Sealer prior to application. Thinning is not typically required, although on very warm days you can use Pettit 120 Brushing Thinner at 5-10% by volume to ease brushing and maintain good flow. When spraying, use Pettit 120 Brushing Thinner up to 20% by volume. Do not apply EZ Wood Sealer on extremely humid days or when rain is threatening. Wood must be clean, dry, and properly prepared prior to varnishing or painting.\u003c\/p\u003e\u003cp\u003eApplication Method: Brush, airless or conventional spray\u003c\/p\u003e\u003cp\u003eNumber of Coats: 1-2\u003c\/p\u003e\u003cp\u003eDry Film Thickness per Coat: 0.8 mils\u003c\/p\u003e\u003cp\u003eWet Film Thickness per Coat:2.6 mils\u003c\/p\u003e\u003cp\u003eApplication Temp: 20°F - 95°F\u003c\/p\u003e\u003cp\u003eDry Times\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTack Free\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1 hour\u003c\/p\u003e\u003cp\u003e2 hours\u003c\/p\u003e\u003cp\u003e75°F\u003c\/p\u003e\u003cp\u003e2 hours\u003c\/p\u003e\u003cp\u003e4 hours\u003c\/p\u003e\u003cp\u003e55°F\u003c\/p\u003e\u003cp\u003e4 hours\u003c\/p\u003e\u003cp\u003e8 hours\u003c\/p\u003e\u003cp\u003e35°F\u003c\/p\u003e\u003cp\u003e8 hours\u003c\/p\u003e\u003cp\u003e16 hours\u003c\/p\u003e\u003cp\u003eSurface Preparation \u0026amp; Application\u003c\/p\u003e\u003cp\u003eBare Wood\u003c\/p\u003e\u003cp\u003eSand surface completely smooth with 220 grit sandpaper. Wipe surface to remove residue.\u003c\/p\u003e\u003cp\u003eApply a coat of Filler Stain per the label to achieve a smoother finish on open grained woods.\u003c\/p\u003e\u003cp\u003eLet dry overnight.\u003c\/p\u003e\u003cp\u003eSkip the last two steps if filler stain is not desired.\u003c\/p\u003e\u003cp\u003eApply a generous coat of EZ Wood Sealer. Let it dry overnight and sand thoroughly with 220 grit sandpaper.\u003c\/p\u003e\u003cp\u003eOn especially rough or porous wood, a second coat may be applied.\u003c\/p\u003e\u003cp\u003eIf second coat is applied, sand the second coat as well and wipe surface clean.\u003c\/p\u003e\u003cp\u003eVarnished Wood in Poor Condition\u003c\/p\u003e\u003cp\u003eRemove all varnish with a paint and varnish remover or by sanding.\u003c\/p\u003e\u003cp\u003eBleach the wood if necessary to remove water stains.\u003c\/p\u003e\u003cp\u003eProceed with the system for bare wood shown above.\u003c\/p\u003e\u003cp\u003eOily Woods\/Bare Teak\u003c\/p\u003e\u003cp\u003eSand the wood smooth with 120 grit production paper to open up the grain.\u003c\/p\u003e\u003cp\u003eWipe the surface thoroughly with Pettit 121 Spraying Thinner to remove as much oil as possible.\u003c\/p\u003e\u003cp\u003eApply a generous coat of EZ Wood Sealer.\u003c\/p\u003e\u003cp\u003eAfter a six hour dry, lightly sand the surface with 220 grit sandpaper.\u003c\/p\u003e\u003cp\u003eApply your finish as per label instructions.\u003c\/p\u003e\u003cp\u003eClick to Download Pettit EZ Wood Sealer Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWhat is Pettit EZ-Wood Sealer used for? Pettit EZ-Wood Sealer is a marine wood sealer designed to seal open wood grain and create a more uniform surface before painting or varnishing. It penetrates raw wood to improve stability and moisture resistance while helping reduce excessive absorptio…\u003c\/li\u003e\u003c\/ul\u003e","brand":"Pettit Paint","offers":[{"title":"Default Title","offer_id":50581927657730,"sku":"PET-2018Q","price":48.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/425186_source_1647354236_7d3aeb2d-d3da-44d2-9a69-7e6cfeab5477.jpg?v=1791079962","url":"https:\/\/allmarineworld.com\/products\/pettit-ez-wood-sealer","provider":"All Marine World","version":"1.0","type":"link"}