{"product_id":"pettit-ez-poxy-topside-finish-performance-enhancer","title":"Pettit Paint EZ-POXY ENHANCER 8 OZ","description":"\u003cp\u003ePettit EZ-Poxy Topside Finish Performance Enhancer\u003c\/p\u003e\u003cp\u003ePettit's EZ-Poxy Performance Enhancer is an additive that increases gloss, harness, and longevity of Pettit solvent-based topside paints. Its advanced formulation reacts with the paint it is mixed in to \"cross-link\" polymers within the paint film, providing exceptional durability, gloss-retention, scratch resistance, and longevity. Additionally, this paint accelerates dry time by up to 40% and increases hardness by up to 25%. Unlike other two-part urethanes, paints catalyzed with this hardener can be applied over well-adhered one-part finishes. With Pettit EZ-Poxy Performance Enhancer, achieving a high quality, long lasting yacht finish is easy.\u003c\/p\u003e\u003cp\u003eRecommended for use with the following Pettit Paints: EZ-Poxy, EZ-Decks, EZ-Bilge, Captain's Varnish, Flagship Varnish, High Build Varnish, and Captain's Ultra-Clear Varnish. Do not use EZ-Poxy Performance Enhancer in epoxies, lacquers, two-part polyurethanes, or water-based paint systems.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eIncreases gloss, harness, durability and longevity\u003c\/p\u003e\u003cp\u003eCompatible with Pettit solvent-based topside finishes\u003c\/p\u003e\u003cp\u003eIncreases flow out of brush strokes and roller stipple, providing a high gloss finish\u003c\/p\u003e\u003cp\u003eAccelerates dry time by up to 40%\u003c\/p\u003e\u003cp\u003eIncreases hardness by up to 25%\u003c\/p\u003e\u003cp\u003eRaises gloss by up to 10%\u003c\/p\u003e\u003cp\u003eImproves resistance to chemicals and solvents\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003ePack Size: 8 oz.\u003c\/p\u003e\u003cp\u003eMix Ratio: 16:1 Paint:Hardener by volume\u003c\/p\u003e\u003cp\u003eCuring mechanism: Chemical cure\u003c\/p\u003e\u003cp\u003eVOC: 604 g\/l\u003c\/p\u003e\u003cp\u003eHow to Use Pettit EZ-Poxy Performance Enhancer\u003c\/p\u003e\u003cp\u003eThe substrate and air temperatures must be between 50°F and 90°F throughout the entire mixing, application, and curing process. For best results when applying multiple coats, EZ-Poxy Performance Enhancer should be added to all the layers.\u003c\/p\u003e\u003cp\u003eMix Ratio: 16:1 Paint:Hardener by volume\u003c\/p\u003e\u003cp\u003eApplication Temp: 50°F  Min \/ 90°F Max\u003c\/p\u003e\u003cp\u003eStir EZ-Poxy Performance Enhancer and paint or varnish thoroughly before mixing. EZ-Poxy Performance Enhancer should be mixed at a 16:1 ratio of paint to catalyst. The entire 8 ounce can of EZ-Poxy Performance Enhancer should be mixed with a gallon of paint. Add two ounces, or six cap-fulls of hardener per quart.\u003c\/p\u003e\u003cp\u003ePaints mixed with EZ-Poxy Performance Enhancer do not require an induction time, so once mixed, application should begin immediately.\u003c\/p\u003e\u003cp\u003eThe mixed paint can be applied by brush and\/or roller. DO NOT SPRAY.\u003c\/p\u003e\u003cp\u003eApplication Tips\u003c\/p\u003e\u003cp\u003eFor brush or roller application, the paint may be thinner 5-10% to aid in flow out and to maintain a wet edge.\u003c\/p\u003e\u003cp\u003eIn hot weather and when using darker colors, the paint may be thinned up to 20%.\u003c\/p\u003e\u003cp\u003eFor best results on large, smooth surfaces, roll out using a high density foam roller. Level off with the tip of a brush.\u003c\/p\u003e\u003cp\u003eApply one thin coat per day. After an overnight dry, lightly sand with 320-grit sandpaper and apply a second coat.\u003c\/p\u003e\u003cp\u003eClick to Download Pettit EZ-Poxy Performance Enhancer Data Sheet\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat does Pettit EZ-Poxy Topside Finish Performance Enhancer do? Pettit EZ-Poxy Topside Finish Performance Enhancer is an additive for compatible Pettit solvent-based topside paints and varnishes. It reacts with the coating to cross-link polymers, increasing hardness, gloss, durability, scratch resistance, chemical and solvent resistance, and overall longevity. It can also accelerate drying by up to 40% and increase hardness by up to 25%.\u003c\/li\u003e\n\u003cli\u003eWhich Pettit paints can be used with EZ-Poxy Performance Enhancer? EZ-Poxy Performance Enhancer is recommended for Pettit EZ-Poxy, EZ-Decks, EZ-Bilge, Captain's Varnish, Flagship Varnish, High Build Varnish, and Captain's Ultra-Clear Varnish. It should not be used with epoxies, lacquers, two-part polyurethanes, or water-based paint systems.\u003c\/li\u003e\n\u003cli\u003eWhat is the mixing ratio for Pettit EZ-Poxy Performance Enhancer? Mix EZ-Poxy Performance Enhancer at a ratio of 16 parts paint to 1 part hardener by volume. The complete 8-ounce can is intended for one gallon of paint, while two ounces, or six cap-fulls…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pettit Paint","offers":[{"title":"Default Title","offer_id":50581927723266,"sku":"PET-3021","price":35.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/ezpoxy-performance-enhancer__74253.1722496788.webp?v=1791079963","url":"https:\/\/allmarineworld.com\/products\/pettit-ez-poxy-topside-finish-performance-enhancer","provider":"All Marine World","version":"1.0","type":"link"}