{"product_id":"jabsco-standard-electric-marine-toilet","title":"Jabsco Electric Toilet\/12V Std Bowl","description":"\u003cp\u003eJabsco Standard Electric Marine Toilet 12V\u003c\/p\u003e\u003cp\u003eJabsco Electric Marine Toilet, Household size. Features push button operation. All materials used for this toilet are corrosion resistant for marine use.\u003c\/p\u003e\u003cp\u003eWhite Vitreous China Bowl\u003c\/p\u003e\u003cp\u003eBaked enamel seat \u0026amp; cover\u003c\/p\u003e\u003cp\u003eFlexible impeller flush pump\u003c\/p\u003e\u003cp\u003ePermanent magnet type motor, fully enclosed, with stainless steel shaft\u003c\/p\u003e\u003cp\u003eHigh capacity macerator and bowl scavenger pump\u003c\/p\u003e\u003cp\u003eBuilt-in back flow preventer\u003c\/p\u003e\u003cp\u003e12V\u003c\/p\u003e\u003cp\u003eInstallation Instructions:\u003c\/p\u003e\u003cp\u003eThe Jabsco electric toilet may be installed above or below the waterline. Flush pump is self-priming with a vertical lift up to 4 feet; discharge macerator pump can operate against a vertical head up to 4 feet.\u003c\/p\u003e\u003cp\u003eInlet and outlet seacocks should be easily accessible and be positive shut off valves. If seacocks cannot be conveniently operated from toilet location, install suitable shut off valves for inlet and discharge connections.\u003c\/p\u003e\u003cp\u003eNote: Base assembly may be moved 90 degrees to accommodate connections and provide accessibility for servicing.\u003c\/p\u003e\u003cp\u003eNote: Surface where toilet is mounted should be flat to prevent distortion of toilet base.\u003c\/p\u003e\u003cp\u003ePlumbing Connections:\u003c\/p\u003e\u003cp\u003eConnect inlet hose using either 5\/8\" or 3\/4\" ID hose. Make sure all inlet connections are airtight and free of sharp bends or restrictions.\u003c\/p\u003e\u003cp\u003eNote: A sleeve is included to adapt pump inlet from 5\/8\" to 3\/4\"\u003c\/p\u003e\u003cp\u003eConnect 1\" or 1-1\/2\" hose to discharge port and make suitable connection to holding tank or other discharge system. Avoid sharp bends or restrictions.\u003c\/p\u003e\u003cp\u003eNote: Adapter 98023-0080 is included to convert discharge port to 1-1\/2\" ID hose.\u003c\/p\u003e\u003cp\u003eFor above waterline installations, a check valve may have to be installed in the flush water intake line to ensure rapid pump priming. To retain water in bowl, make a loop in the discharge line about 8 inches above base of bowl. Do not connect inlet hose to a pressurized water system.\u003c\/p\u003e\u003cp\u003eIf toilet is, or can be, below waterline at any normal (including static) attitude of vessel heel and\/or trim, a 3\/4\" Vented Loop Fitting must be installed in the length of hose connecting the flushing pump to the inlet seacock. The Vented Loop Fitting must be positioned so it remains slightly above the waterline at all angles of heel and trim.\u003c\/p\u003e\u003cp\u003eElectrical Connections:\u003c\/p\u003e\u003cp\u003eSelect a location for the switch and instruction plate, making sure wire leads from both the toilet and the power source can be routed to the switch.\u003c\/p\u003e\u003cp\u003eEnsure the panel where installing switch is no more than 1\" thick. Drill a 5\/8\" mounting hole and install switch and instruction plate.\u003c\/p\u003e\u003cp\u003eUse stranded copper wire of the correct size to connect one side of the switch to the positive power source. An appropriate size fuse or equivalent circuit breaker must be installed in the positive power lead within seven inches of the power source.\u003c\/p\u003e\u003cp\u003eConnect the other side of the switch to the orange (positive) motor lead.\u003c\/p\u003e\u003cp\u003eConnect the black (negative) motor lead to the negative side of the battery or grounded buss bar.\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Jabsco Standard Electric Marine Toilet 12V designed for? The Jabsco Standard Electric Marine Toilet 12V is a household-size marine toilet with a white vitreous china bowl and push-button operation. It uses corrosion-resistant materials for marine use and includes a flexible impeller flush pump, macerator and bowl scavenger pump, and built-in backflow preventer.\u003c\/li\u003e\n\u003cli\u003eCan the Jabsco Standard Electric Marine Toilet 12V be installed above or below the waterline? Yes. The Jabsco electric toilet may be installed above or below the waterline. If the toilet is or can be below the waterline at any normal vessel heel or trim, the installation instructions require a 3\/4-inch vented loop fitting in the hose between the flushing pump and inlet seacock.\u003c\/li\u003e\n\u003cli\u003eWhat hose sizes are used for the Jabsco Standard Electric Marine Toilet? The inlet connection accepts either 5\/8-inch or 3\/4-inch ID hose, with an included sleeve adapting…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":50581722136834,"sku":"ITT-37010-4092","price":928.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/37010-1090__05438.1558191392.jpg?v=1791078449","url":"https:\/\/allmarineworld.com\/products\/jabsco-standard-electric-marine-toilet","provider":"All Marine World","version":"1.0","type":"link"}