{"product_id":"interlux-watertite-2-part-epoxy-marine-filler","title":"Interlux Paint Watertite 2-Part Epoxy Marine Filler","description":"\u003cp\u003eInterlux Watertite 2-Part Epoxy Marine Filler Compound\u003c\/p\u003e\u003cp\u003eInterlux Watertite is a quick drying 2-part epoxy filler suitable for use on Fiberglass, Metals, Epoxy and rigid Wood constructions. The formulation does not shrink and is extremely water resistant, making it suitable for osmosis damage repairs. It has a long easy-to-sand window and can be applied to a thickness of 3\/4\" without sagging. Its superior spreadability makes it an ideal glazing compound for filling small nicks and scratches.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eVery fast drying\u003c\/p\u003e\u003cp\u003eSimple 1:1 mixing ratio\u003c\/p\u003e\u003cp\u003eHigh strength and adhesion properties\u003c\/p\u003e\u003cp\u003eUse above and below the waterline\u003c\/p\u003e\u003cp\u003eFill up to 3\/4\" without sagging\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eApplication Area: Above and below water\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eNumber of Coats: As required\u003c\/p\u003e\u003cp\u003ePack sizes: 500 ml \/ 1 Lt\u003c\/p\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow To Apply Interlux Watertite Epoxy Marine Filler\u003c\/p\u003e\u003cp\u003eApplication Data Method: Spatula \/ Putty Knife\u003c\/p\u003e\u003cp\u003eDry Film Thickness per Coat: 63.5 mils\u003c\/p\u003e\u003cp\u003eCoverage: 25 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eApplication Temp: 45°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eThinner: Do Not Thin\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eSandable\u003c\/p\u003e\u003cp\u003eTo Launch\u003c\/p\u003e\u003cp\u003ePot Life\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e20 MIN\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003e36 HR\u003c\/p\u003e\u003cp\u003e10 MIN\u003c\/p\u003e\u003cp\u003e10 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e35 MIN\u003c\/p\u003e\u003cp\u003e5 HR\u003c\/p\u003e\u003cp\u003e2 DAY\u003c\/p\u003e\u003cp\u003e15 MIN\u003c\/p\u003e\u003cp\u003e5 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e50 MIN\u003c\/p\u003e\u003cp\u003e8 HR\u003c\/p\u003e\u003cp\u003e5 DAY\u003c\/p\u003e\u003cp\u003e25 MIN\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003eNote: At 7°C\/45°F the pot life is 30 mins and the product is sandable after 24 hrs, immersion after 6 days.\u003c\/p\u003e\u003cp\u003eMETAL: Above water: Pre-prime with Viny-Lux Primewash 353\/354. Apply one coat of Epoxy Primekote. Sand surface with 80-120 grade (grit) paper, wipe clean. Apply Watertite*. Below water: Prime with Interprotect 2000E or Interprotect 3000.\u003c\/p\u003e\u003cp\u003eBARE FIBERGLASS: Clean with Fiberglass Surface Prep YMA601 or Fiberglass Solvent Wash 202. Sand with 80 grade (grit) paper. Remove sanding residue.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: Mix in a 1:1 ratio by volume it is important to ensure the correct volume mix ratio is used. Mix the two components thoroughly to an even colour. Do not use below 7°C. Do not apply more than ¾\" thickness at any one time. Product temperature should be minimum 10° C\/50°F and maximum 35°C\/95°F. Ambient temperature should be minimum 7°C\/45°F and maximum 35°C\/95°F. Substrate temperature should be minimum 7°C\/45°F and maximum 35°C\/95°F. Apply using a trowel, spatula or putty knife. When the product has cured, wash with fresh water and sand with 80 grade (grit) paper. Apply to clean, dry, properly prepared surfaces only. Watertite* must be overcoated with VC Tar, VC Performance Epoxy, Interprotect 2000E\/2001E or Interprotect 3000\/3001. Do not apply topside finishes, polyester or vinylester materials over Watertite*.\u003c\/p\u003e\u003cp\u003eClick to Download Interlux Watertite Epoxy Filler Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux Watertite 2-Part Epoxy Marine Filler Compound used for? Interlux Watertite 2-Part Epoxy Marine Filler Compound is a quick-drying, water-resistant epoxy filler for repairing fiberglass, metals, epoxy, and rigid wood constructions. It can be used above or below the waterline and is suitable for filling small nicks and scratches as well as osmosis damage repairs.\u003c\/li\u003e\n\u003cli\u003eHow do I mix Interlux Watertite Epoxy Marine Filler? Mix the two components in a precise 1:1 ratio by volume. Thoroughly combine both components until the mixture reaches an even color. Watertite should not be thinned, and the product should not be applied below 45°F.\u003c\/li\u003e\n\u003cli\u003eHow thick can Interlux Watertite be applied? Interlux Watertite can be applied up to 3\/4 inch thick at one time without sagging. Apply it with a trowel, spatula, or putty knife to clean, dry, properly prepared surfaces. Do not exceed the 3\/4-inch maximum application thickness in a single application.\u003c\/li\u003e\n\u003cli\u003eCan Interlux Watertite be used above and below the waterline? Yes. Interlux Watertite is formulated for use …\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"1 Litre","offer_id":50581710471426,"sku":"ILX-YAV135L","price":103.99,"currency_code":"USD","in_stock":true},{"title":"5508072","offer_id":50581710504194,"sku":"ILX-YAV135","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/WatertiteEpoxyFiller__72511.1737823039_60496853-0489-4704-9d90-f67bd418fcd3.jpg?v=1791078383","url":"https:\/\/allmarineworld.com\/products\/interlux-watertite-2-part-epoxy-marine-filler","provider":"All Marine World","version":"1.0","type":"link"}