{"product_id":"interlux-vc-offshore-antifouling-bottom-paint","title":"Interlux Paint VC Offshore Antifouling Bottom Paint","description":"\u003cp\u003eInterlux VC Offshore Antifouling Boat Bottom Paint\u003c\/p\u003e\u003cp\u003eFormulated for high-performance boats, Interlux VC Offshore Antifouling Bottom Paint delivers a smooth, ultra-durable finish that resists fouling while reducing drag. This hard, low-friction VC Offshore paint is ideal for racing and powerboats, providing superior protection in saltwater and freshwater environments. Its fast-drying, solvent-based formula allows for easy sanding and burnishing, ensuring maximum speed and efficiency on the water. With no paint buildup over time, it's the perfect choice for boaters who demand top-tier performance and long-lasting antifouling protection. Available in blue, red, or black to complement your vessel.\u003c\/p\u003e\u003cp\u003eSold in Gallons\u003c\/p\u003e\u003cp\u003eVC Offshore for racing, sailing and performance power boats is formulated with Fluoro microadditive for a hard, smooth low friction surface that can be burnished to a very low profile. When polished, VC Offshore yields a very hard finish for maximum durability and reduced friction for increased performance. VC Offshore is suitable for use in fresh and salt water.\u003c\/p\u003e\u003cp\u003eFor racing, sailing and power boats\u003c\/p\u003e\u003cp\u003eSuitable for fresh and salt water\u003c\/p\u003e\u003cp\u003eHard, Smooth finsh\u003c\/p\u003e\u003cp\u003eLow friction finish\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eNumber of Coats: 3-4\u003c\/p\u003e\u003cp\u003eAvailable in 3 colors:\u003c\/p\u003e\u003cp\u003eBlack (ILX-V118)\u003c\/p\u003e\u003cp\u003eBlue (ILX-V116)\u003c\/p\u003e\u003cp\u003eRed (ILX-V117)\u003c\/p\u003e\u003cp\u003eInterlux Special Thinner: For thinning and clean-up\u003c\/p\u003e\u003cp\u003eHow to Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION DATA METHOD: Brush, Conventional Spray, Roller(Pressure Pot)\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: 3\u003c\/p\u003e\u003cp\u003eDRY FILM THICKNESS PER COAT: 2 mils (5.1 wet mils)\u003c\/p\u003e\u003cp\u003eCOVERAGE: 300 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eAPPLICATION TEMP: 50° F. Min. \/ 95°F. Max.\u003c\/p\u003e\u003cp\u003eTHINNER: Viny-Lux® Solvent 355 or Special Thinner 216\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003eTo Launch\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1 HR\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e8 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e6 HR\u003c\/p\u003e\u003cp\u003e12 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003e12 HR\u003c\/p\u003e\u003cp\u003e16 HR\u003c\/p\u003e\u003cp\u003ePREVIOUSLY PAINTED SURFACES: Remove, unless it is vinyl based. Scrape and sand old vinyl coatings which are not adhering, clean and dry surface. Remove antifouling paint in poor condition with Interstrip Semi-Paste 299E.\u003c\/p\u003e\u003cp\u003eBARE FIBERGLASS: Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Sand with 80 grade (grit) paper. Remove sanding residue. Wipe with Fiberglass Solvent Wash 202.\u003c\/p\u003e\u003cp\u003eBARE WOOD: Sand with 80 grade (grit) paper. Clean with Special Thinner 216. Apply 1st coat thinned 10% with VinyLux® Solvent 355.\u003c\/p\u003e\u003cp\u003eBARE METAL: Sandblast and apply 4-5 coats of Interprotect® 2000E\/2001E. If blasting is not possible (or if more than 2 hours has passed since blasting) sand or grind with coarse emery cloth and apply a self-etching primer prior to Interprotect 2000E\/2001E or Interprotect 3000\/3001.\u003c\/p\u003e\u003cp\u003eDO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: Apply 3 coats of VC Offshore*. BURNISHING: After the final coat of VC Offshore* has cured, wet sand with 400 grade (grit) paper, removing any imperfections in the coat. Burnish with fine bronze wool until a shiny, super smooth finish is obtained. Apply an extra coat if wet sanding or burnishing. Conventional Spray Pressure Pot: Pressure: 3.44-4.08 bar\/50-60 psi (gun pressure), pot pressure 10-15 psi. Tip Size: 1.8-2.2 mm\/70-85 thou. Spraying of antifouling paints is prohibited in Canada. Other Do not apply thin coats. Do not apply VC Offshore* in thin coats as this will lead to a rougher surface and additional sanding. It may also lead to premature fouling. Product temperature should be minimum 10°C\/50°F and maximum 29°C\/85°F. Ambient temperature should be minimum 10°C\/50°F and maximum 29°C\/85°F. Substrate temperature should be minimum 10°C\/50°F and maximum 29°C\/85°F. Apply to clean, dry, properly prepared surfaces only. Bare surfaces must be sanded. Do not apply VC Offshore* over non-vinyl antifouling paints. Do not apply VC Offshore* over aluminum. Do not use on aluminum boats, out…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5608358","offer_id":50581708013826,"sku":"ILX-V116G","price":587.99,"currency_code":"USD","in_stock":true},{"title":"5608361","offer_id":50581708046594,"sku":"ILX-V118G","price":587.99,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":50581708079362,"sku":"ILX-V117G","price":587.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/ilx-v116g_lg__74349.1722350791.webp?v=1791078377","url":"https:\/\/allmarineworld.com\/products\/interlux-vc-offshore-antifouling-bottom-paint","provider":"All Marine World","version":"1.0","type":"link"}