{"product_id":"interlux-sikkens-cetol-marine-wood-finish","title":"Interlux Paint Sikkens Cetol Marine Wood Finish","description":"\u003cp\u003eInterlux Sikkens Cetol Marine Wood Finish\u003c\/p\u003e\u003cp\u003eInterlux Sikkens Cetol Marine Wood Finish produces an attractive dark amber appearance on wood. Sikkens Cetol Marine is a durable, translucent protective wood finish for use above the waterline on interior or exterior woods. Cetol Marine Finishes feature Next Wave Technology: the next generation of finishes with a unique UV package of advanced ultra violet absorbers that provide greater protection, durability, and longevity. Cetol Marine has excellent weathering properties and is flexible, allowing for the natural expansion and contraction of wood. This easy to apply finish has been specially formulated to protect wood and keep it looking beautiful.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Satin\u003c\/p\u003e\u003cp\u003eCoverage: Approx. 360 ft²\/gal.\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3\u003c\/p\u003e\u003cp\u003eSuitable for interior and exterior wood applications above the waterline\u003c\/p\u003e\u003cp\u003eProduces dark amber appearance\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInterlux Special Thinner: Clean-up on painted surfaces\u003c\/li\u003e\n\u003cli\u003eIf Cetol Marine is spilled onto a painted surface, use Interlux Special Thinner to clean. Do not allow excess thinner to remain on painted surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHow to Apply Interlux Sikkens Cetol Marine Wood Finish\u003c\/p\u003e\u003cp\u003eFollow preparation procedures\u003c\/p\u003e\u003cp\u003eOne coat Cetol Marine Finish\u003c\/p\u003e\u003cp\u003eAllow 24 hours for drying\u003c\/p\u003e\u003cp\u003eOne coat Cetol Marine Finish\u003c\/p\u003e\u003cp\u003eAllow 24 hours for drying\u003c\/p\u003e\u003cp\u003eOne coat Cetol Marine Finish\u003c\/p\u003e\u003cp\u003eApplication: Use a long haired natural bristle brush. Apply in direction of grain.\u003c\/p\u003e\u003cp\u003eNumber of Coats: 3\u003c\/p\u003e\u003cp\u003eApplication Do's: Apply when temperature is between 50°F and 95°F. Saturate all end grains and apply liberal coats. Maintain a wet edge and apply in direction of grain.For application, use a long haired natural bristle brush. Don't apply in direct sunlight or when surface is hot to touch. Do not apply in wet weather or when the moisture content is greater than 18%. Sikkens Cetol Marine Finish should not be applied below the waterline.\u003c\/p\u003e\u003cp\u003eSurface Preparation Procedures:\u003c\/p\u003e\u003cp\u003eNew Exterior\/Interior Wood:\u003c\/p\u003e\u003cp\u003eWipe the wood with Interlux Special Thinner 216 to remove any natural surface oils and contaminants. Once dry, sand surface with 180-220 grit sandpaper, always sand along the length of the grain. Remove all sanding dust by vacuuming the surface.\u003c\/p\u003e\u003cp\u003eWipe the surface with Interlux Special Thinner 216 and allow to dry before applying Cetol products.\u003c\/p\u003e\u003cp\u003eNote: If the wood is exposed for more than 24 hours, clean the surface again with Interlux Special Thinner 216 in order to remove any surface contaminants.\u003c\/p\u003e\u003cp\u003eExterior\/Interior – Previously Coated Wood (Non-Cetol Marine Products):\u003c\/p\u003e\u003cp\u003eRemove all existing coatings before applying Cetol. To remove old coating, either sand with 120-180 grit sandpaper or use Interlux Inter strip 299E chemical stripper specifically designed f or marine use.\u003c\/p\u003e\u003cp\u003eOnce previous coating is removed, follow instructions for New Exterior\/Interior Wood.\u003c\/p\u003e\u003cp\u003eExterior – Weathered Wood or Previously Oiled Wood:\u003c\/p\u003e\u003cp\u003eTo ensure proper adhesion of Cetol products on weathered or previously oiled wood, use Interlux Premium Teak Restorer with a nylon scuffing pad as per instructions on label. Be sure to rinse the wood well with clean water to remove surface dirt and allow to dry thoroughly. This should be followed by the preparation procedures for New Exterior\/Interior Wood.\u003c\/p\u003e\u003cp\u003eBlue Fungi and Mildew:\u003c\/p\u003e\u003cp\u003ePersistent blue fungi or mildew may be treated by using Teak Restorer with a nylon scuffing pad as per instructions on label. Be sure to rinse the wood well with clean water to remove surface dirt and allow to dry thoroughly for three full days before applying Cetol Marine products.\u003c\/p\u003e\u003cp\u003eApplication Procedure:\u003c\/p\u003e\u003cp\u003eFollow preparation procedures\u003c\/p\u003e\u003cp\u003eApply one coat of Interlux Sikkens Cetol Marine Wood Finish\u003c\/p\u003e\u003cp\u003eWait 24 hours\u003c\/p\u003e\u003cp\u003eApply second coat of Interlux Sikkens Cetol Marine Wood Finish\u003c\/p\u003e\u003cp\u003eWait 24 hours\u003c\/p\u003e\u003cp\u003eApply third coat of Interlux Sikk…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5606627","offer_id":50581707391234,"sku":"ILX-IVA-300G","price":185.79,"currency_code":"USD","in_stock":true},{"title":"5606629","offer_id":50581707424002,"sku":"ILX-IVA-300Q","price":59.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/421679_source_1528743875_6399795c-c5c7-4460-9772-380b941dd074.jpg?v=1791078372","url":"https:\/\/allmarineworld.com\/products\/interlux-sikkens-cetol-marine-wood-finish","provider":"All Marine World","version":"1.0","type":"link"}