{"product_id":"interlux-sikkens-cetol-marine-gloss-finish","title":"Interlux Paint Cetol Marine High Gloss Qt","description":"\u003cp\u003eInterlux Sikkens Cetol Marine Gloss Finish\u003c\/p\u003e\u003cp\u003eInterlux Sikkens Cetol Marine Gloss with Next Wave UV-absorbing technology is a durable clear gloss protective wood finish, developed as a topcoat for Cetol Marine, Cetol Marine Light and Cetol Marine Natural Teak. Next Wave technology is the next generation of Cetol Marine from Sikkens with a unique UV-absorbing package, which is specialty resins and advanced UV absorbers that provide greater protection, durability and longevity. Cetol Marine Gloss provides a high gloss, hard wearing, UV protection and an easy to clean finish. It can be used where a gloss appearance is preferred on top of Cetol Marine, Cetol Marine Light and Cetol Marine Natural Teak.\u003c\/p\u003e\u003cp\u003eCetol Marine Natural Teak Finish can be used on exterior and interior hardwood varieties such as teak, mahogany and oak. Cetol products should only be applied above the waterline. Do not use on decks.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eDurable, clear gloss finish\u003c\/p\u003e\u003cp\u003eMicroporous, which allows wood to breathe\u003c\/p\u003e\u003cp\u003eUnique formula shields wood against sunlight\u003c\/p\u003e\u003cp\u003eExcellent weathering properties\u003c\/p\u003e\u003cp\u003eFlexible, allowing for the natural expansion and contraction of wood\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Gloss\u003c\/p\u003e\u003cp\u003eCoverage: 360 ft²\/gal\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3\u003c\/p\u003e\u003cp\u003eHow to Apply Sikkens Cetol Marine Gloss Finish\u003c\/p\u003e\u003cp\u003eIf a high gloss finish is desired, Cetol Marine Gloss can be applied after the initial application of three coats of Cetol Marine, Marine Light, or Cetol Marine Natural Teak. If a brilliant high gloss finish is desired, lightly sand between coats of Cetol Marine Gloss using 220-320 grit sandpaper. In this case, Sikkens recommends the application of a third coat of Cetol Marine Gloss to compensate for the reduced layer thickness .Apply all coats within 1-2 weeks.\u003c\/p\u003e\u003cp\u003eFinish: Gloss\u003c\/p\u003e\u003cp\u003eApplication Method: Brush\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3\u003c\/p\u003e\u003cp\u003eCoverage: 400 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eApplication Temp: 50°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eThinner: Do Not Thin\u003c\/p\u003e\u003cp\u003eRecommended DFT: 0.6 mils dry\u003c\/p\u003e\u003cp\u003eRecommended WFT: 1.2 mils wet\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Hard Dry\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e4 HR\u003c\/p\u003e\u003cp\u003e24 HR\u003c\/p\u003e\u003cp\u003e24 HR\u003c\/p\u003e\u003cp\u003eCetol® Marine Gloss is a gloss topcoat that can only be applied on top of a minimum of 2 coats of Cetol® Marine, Cetol® Marine Light or Cetol® Marine Natural Teak.\u003c\/p\u003e\u003cp\u003eApplication Information:\u003c\/p\u003e\u003cp\u003eThe wood moisture content should be below 18% before application.\u003c\/p\u003e\u003cp\u003eApply liberally using a long-haired bristle brush, smoothly, in the direction of the wood grain.\u003c\/p\u003e\u003cp\u003eKeep a wet edge to prevent lap marks and thoroughly saturate end grains where possible.\u003c\/p\u003e\u003cp\u003eApply 2-3 coats of Cetol Marine Gloss.\u003c\/p\u003e\u003cp\u003eAlways allow 24 hours drying time in between coats.\u003c\/p\u003e\u003cp\u003eApply all coats within 1-2 weeks.\u003c\/p\u003e\u003cp\u003eClick to Download Sikkens Cetol Marine Gloss Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux Sikkens Cetol Marine Gloss Finish used for? Interlux Sikkens Cetol Marine Gloss Finish is a durable clear gloss wood topcoat designed for use over Cetol Marine, Cetol Marine Light, or Cetol Marine Natural Teak. It provides a high-gloss, easy-to-clean finish with UV protection and flexibility to accommodate the natural expansion and contraction of wood.\u003c\/li\u003e\n\u003cli\u003eCan Interlux Sikkens Cetol Marine Gloss be used directly on bare wood? No. Cetol Marine Gloss is a topcoat and must be applied over a minimum of two coats of Cetol Marine, Cetol Marine Light, or Cetol Marine Natural Teak. Cetol products should only be used above the waterline and should not be applied to decks.\u003c\/li\u003e\n\u003cli\u003eHow many coats of Cetol Marine Gloss should I apply? Apply 2-3 coats of Cetol Marine Gloss by brush. If lightly sanding between coats with 220-320 grit sandpaper for a brilliant high-gloss finish, Sikkens recommends applying a third coat to compensate for the reduced layer thickness.\u003c\/li\u003e\n\u003cli\u003eWhat types of wood can Cetol Marine Gloss be used on? Cetol Marine Gloss can be used as a gloss topcoat over Cetol Marine, Cetol Marine Light, or Cetol Marine Natural Teak. The Cetol Marine Natural Teak system can b…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581707555074,"sku":"ILX-IVA-315Q","price":65.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/ILX-IVA-315Q__13517.1722508664_9067babc-ccca-456d-8c10-0002aae2f558.webp?v=1791078373","url":"https:\/\/allmarineworld.com\/products\/interlux-sikkens-cetol-marine-gloss-finish","provider":"All Marine World","version":"1.0","type":"link"}