{"product_id":"interlux-pre-kote-plus-boat-primer","title":"Interlux Paint Pre-Kote Plus Boat Primer","description":"\u003cp\u003eInterlux Pre-Kote Plus Boat Primer\u003c\/p\u003e\u003cp\u003eAs one of the largest manufacturers of marine paints and primers, Interlux is a name you can trust for high-quality products that provide long-lasting protection for your boat finishes. The innovative technology has been leading the way for over a century in boat primers and paints, including the Interlux Pre-Kote Plus boat primer. Interlux’s commitment to research and development has helped to create a high-performance boat primer that has stood the test of time.\u003c\/p\u003e\u003cp\u003ePre-Kote Plus is a one part primer and undercoat that offers substrate protection with an ultra-smooth finish. Designed for use above the waterline Pre-Kote plus can be directly applied to most substrates including properly prepared metal. The lower VOC formula allows for easier application with improved flow. DIY customers will find Pre-Kote Plus to offer excellent flow, leveling, and easy to sand. Pre-Kote Plus is easy to use and the perfect foundation for your topcoat.\u003c\/p\u003e\u003cp\u003eFor an extra smooth  application should be done with a brush or roller, with a conventional sprayer being acceptable too. Interlux primer has a reduced working time with great substrate protection. It is recommended to apply 2-4 coats, depending on desired thickness. Make sure to correct surface imperfections before application. Sanding between each application is recommended for optimal application. Interlux Pre-Kote Plus is available in quarts and gallons. Each gallon covers ~440 sq\/ft.\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eFinish: Matte\u003c\/p\u003e\u003cp\u003eApplication Method: Brush, roller or spray\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-4\u003c\/p\u003e\u003cp\u003eCoverage: 440 sq. ft\/gal per coat\u003c\/p\u003e\u003cp\u003eAssociated Products:\u003c\/p\u003e\u003cp\u003eThinner\/Cleaner\u003c\/p\u003e\u003cp\u003e2333N Reducing Solvent\u003c\/p\u003e\u003cp\u003e333 Brushing Thinner\u003c\/p\u003e\u003cp\u003e216 Special Thinner\u003c\/p\u003e\u003cp\u003eDo not use this product on aluminum outdrives\u003c\/p\u003e\u003cp\u003eHow To Apply Pre-Kote Plus Primer\u003c\/p\u003e\u003cp\u003eInterlux Pre-Kote is compatible with the following Interlux finishes: Bilgekote, Interdeck, Pre-Kote Plus, Toplac Plus, and Watertite.\u003c\/p\u003e\u003cp\u003eApplication Method:  Brush, Roller, Conventional Spray - Pressure Pot or Siphon Cup\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-4 As Needed\u003c\/p\u003e\u003cp\u003eDry Film Thickness per Coat: 1.9 mils (4 wet mils)\u003c\/p\u003e\u003cp\u003eCoverage: 440 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eApplication Temp: 41°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eThinning: Not usually required. Pre-Kote Plus can be thinned up to 10%. If thinned an additional coat may be required to achieve film thickness required to protect substrate\u003c\/p\u003e\u003cp\u003eBrush: Solvent resistant standard brush\u003c\/p\u003e\u003cp\u003eRoller: 4mm nap velour roller (If foam rollers are used a lower film build\/opacity may be achieved and an additional coat required)\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eHard Dry\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003eSandable\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e2.5 Hours\u003c\/p\u003e\u003cp\u003e1 Hour\u003c\/p\u003e\u003cp\u003e8 Hours\u003c\/p\u003e\u003cp\u003e77°F\u003c\/p\u003e\u003cp\u003e3 Hours\u003c\/p\u003e\u003cp\u003e2 Hours\u003c\/p\u003e\u003cp\u003e12 Hours\u003c\/p\u003e\u003cp\u003e59°F\u003c\/p\u003e\u003cp\u003e5 Hours\u003c\/p\u003e\u003cp\u003e3 Hours\u003c\/p\u003e\u003cp\u003e18 Hours\u003c\/p\u003e\u003cp\u003e41°F\u003c\/p\u003e\u003cp\u003e12 Hours\u003c\/p\u003e\u003cp\u003e6 Hours\u003c\/p\u003e\u003cp\u003e36 Hours\u003c\/p\u003e\u003cp\u003eNote: Pre-Kote Plus must be sanded between coats.\u003c\/p\u003e\u003cp\u003eSurface Preparation \u0026amp; Application\u003c\/p\u003e\u003cp\u003ePreviously Painted Surfaces\u003c\/p\u003e\u003cp\u003eIf in poor condition remove all previous coatings\u003c\/p\u003e\u003cp\u003eWash Down with a suitable detergent, rinse with fresh water and allow to dry\u003c\/p\u003e\u003cp\u003eSand with 220-280 grit paper\u003c\/p\u003e\u003cp\u003eRemove all sanding residue\u003c\/p\u003e\u003cp\u003eWipe with 333 Brushing Thinner and allow to dry\u003c\/p\u003e\u003cp\u003eBarewood\u003c\/p\u003e\u003cp\u003eSand with 80 - 180 grit paper\u003c\/p\u003e\u003cp\u003eRemove sanding dust by brushing dusting and wiping\u003c\/p\u003e\u003cp\u003eWipe with 2333N Reducing Solvent\u003c\/p\u003e\u003cp\u003ePlywood\u003c\/p\u003e\u003cp\u003eFollow directions above for bare wood\u003c\/p\u003e\u003cp\u003eApply Inter-Prime Wood Sealer Clear 1026\u003c\/p\u003e\u003cp\u003eSteel\u003c\/p\u003e\u003cp\u003eDegrease with solvent or suitable detergent cleaner\u003c\/p\u003e\u003cp\u003eGritblast to Sa 2-1\/2 - near white metal surface\u003c\/p\u003e\u003cp\u003eIf gritblasting is not possible, grind the metal surface with 24-36 grit abrasive discs\u003c\/p\u003e\u003cp\u003eGrind to a uniform clean bright metals surface 50-75 micron anchor pattern\u003c\/p\u003e\u003cp\u003eUse an angle grinder on small areas\u003c\/p\u003e\u003cp\u003eClean thoroughly and allow to dry completely\u003c\/p\u003e\u003cp\u003eAluminum\u003c\/p\u003e\u003cp\u003eDegrease with solvent or suitable detergent cleaner\u003c\/p\u003e\u003cp\u003eSan well using 24 - 120 grit alum…\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"5822790","offer_id":50581714141442,"sku":"ILX-YUC000\/1QTUS","price":53.99,"currency_code":"USD","in_stock":false},{"title":"5822793","offer_id":50581714174210,"sku":"ILX-YUC000\/1GLUS","price":169.49,"currency_code":"USD","in_stock":true},{"title":"5824260","offer_id":50581714206978,"sku":"ILX-YUC001\/QTUS","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/0000q__48007.1780061460.webp?v=1791078401","url":"https:\/\/allmarineworld.com\/products\/interlux-pre-kote-plus-boat-primer","provider":"All Marine World","version":"1.0","type":"link"}