{"product_id":"interlux-high-gloss-yacht-enamel-white","title":"Interlux Paint High Gloss White","description":"\u003cp\u003eInterlux High Gloss White Yacht Enamel\u003c\/p\u003e\u003cp\u003eInterlux Yacht Enamel is a fast drying, high quality topside finish. It has excellent adhesion to properly prepared surfaces and superior hiding characteristics. Easy to apply by brush, roller, conventional spray and airless spray. Interlux Yacht Enamel is ideal for use above the true waterline for hullsides, decks, boottops and fasion stripes. Bright, high gloss finish allows the natural beauty of wood to show through.\u003c\/p\u003e\u003cp\u003eGreat color and gloss retention\u003c\/p\u003e\u003cp\u003eTraditional alkyd-based marine enamel\u003c\/p\u003e\u003cp\u003eBright, high gloss finish\u003c\/p\u003e\u003cp\u003eExcellent flow and leveling properties\u003c\/p\u003e\u003cp\u003eSold in quarts\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eColor: White\u003c\/p\u003e\u003cp\u003eFinish: High Gloss\u003c\/p\u003e\u003cp\u003eCoverage: 550 ft²\/gal. by brush\u003c\/p\u003e\u003cp\u003eNumber of Coats: 2-3 minimum\u003c\/p\u003e\u003cp\u003eThinners:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInterlux Brush Thinner: Thinning for brush application \u0026amp; clean-up\u003c\/li\u003e\n\u003cli\u003eInterlux Special Thinner: Thinning for spray application \u0026amp; clean-up\u003c\/li\u003e\n\u003cli\u003eIt is best to paint on warm, dry mornings. Cold weather retards the drying and humidity can spoil the gloss.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e\u003cp\u003eHow To Apply\u003c\/p\u003e\u003cp\u003eAPPLICATION METHOD: Airless Spray, Brush, Conventional Spray, Roller- Pressure Pot or Siphon Cup\u003c\/p\u003e\u003cp\u003eNUMBER OF COATS: 2-3 minimum\u003c\/p\u003e\u003cp\u003eDRY FILM THICKNESS PER COAT: 2 mils (3.6 wet mils)\u003c\/p\u003e\u003cp\u003eCOVERAGE: 550 sq. ft\/gal.\u003c\/p\u003e\u003cp\u003eAPPLICATION TEMP: 50°F Min. \/ 95°F Max.\u003c\/p\u003e\u003cp\u003eTHINNER: Brush - Brushing Liquid 333. Spray - Special Thinner 216.\u003c\/p\u003e\u003cp\u003eDRY TIMES:\u003c\/p\u003e\u003cp\u003eTemp\u003c\/p\u003e\u003cp\u003eTo Touch\u003c\/p\u003e\u003cp\u003eTo Recoat\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003e1 HR\u003c\/p\u003e\u003cp\u003e8 HR\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e2 HR\u003c\/p\u003e\u003cp\u003e12 HR\u003c\/p\u003e\u003cp\u003e50°F\u003c\/p\u003e\u003cp\u003e3 HR\u003c\/p\u003e\u003cp\u003e16 HR\u003c\/p\u003e\u003cp\u003eBARE FIBERGLASS: In Good Condition Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water and allow to dry. Wipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202. While the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned. Sand with 180 grade (grit) paper. Remove sanding residue. In Poor Condition Clean as above. Sand with 80 grade (grit) paper. Apply White Undercoater 279.\u003c\/p\u003e\u003cp\u003eBARE WOOD: Sand surface, wipe clean. Apply White Undercoater 279. Sand surface, wipe clean.\u003c\/p\u003e\u003cp\u003eSTEEL HULLS: Sandblast or grind, remove sanding residue. Immediately apply a self-etching primer. Allow to dry for 1-24 hours. Apply one coat of Epoxy Barrier-Kote 404\/414.\u003c\/p\u003e\u003cp\u003eAPPLICATION INFORMATION: Apply 2-3 coats of Yacht Enamel* following the proper dry times. Sand between coats using 220-320 grade (grit) paper. Remove sanding residue with a rag dampened with Brushing Liquid 333. Yacht Enamel* may be applied by roller and brush using the roll and tip method. It is best to paint on warm, dry mornings. Cold weather retards the drying and humidity can spoil the gloss. Airless Spray Pressure: 170 bar\/2500 psi. Tip Size: 0.33-0.41 mm\/13-16 thou. Conventional Spray Pressure Pot: Pressure: 3.44-4.47 bar\/50-65 psi (gun pressure); 8-10 psi (pot pressure). Tip Size: 0.89-1.4 mm\/35-50 thou. Siphon Cup: Pressure: 3.44-4.47 bar\/50-65 psi - gun pressure. Tip Size: 1.5-1.8 mm\/60-70 thou.\u003c\/p\u003e\u003cp\u003eHow to Apply\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux High Gloss White Yacht Enamel used for? Interlux High Gloss White Yacht Enamel is a traditional alkyd-based marine enamel designed for above-waterline applications. It can be used on hullsides, decks, boottops, and fashion stripes, providing a bright, high-gloss finish with good color and gloss retention.\u003c\/li\u003e\n\u003cli\u003eCan Interlux Yacht Enamel be applied to fiberglass, wood, and steel? Yes. Interlux Yacht Enamel can be applied to properly prepared fiberglass, wood, and steel. Bare fiberglass and wood require White Undercoater 279, while steel requires a self-etching primer followed by one coat of Epoxy Barrier-Kote 404\/414 before applying the Yacht Enamel.\u003c\/li\u003e\n\u003cli\u003eHow many coats of Interlux Yacht Enamel should I apply? Apply a minimum of 2-3 coats of Interlux Yacht Enamel, allowing the appropriate drying time between coats. Sand between coats with 220-32…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":50581704802562,"sku":"ILX-1Q","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/premium-yacht-enamel__97800.1722494879.webp?v=1791078357","url":"https:\/\/allmarineworld.com\/products\/interlux-high-gloss-yacht-enamel-white","provider":"All Marine World","version":"1.0","type":"link"}