{"product_id":"interlux-bilgekote-marine-paint-quart","title":"Interlux Paint Bilgekote Marine Paint Quart","description":"\u003cp\u003eInterlux Bilgekote Bilge Enamel Marine Paint\u003c\/p\u003e\u003cp\u003eInterlux Bilgekote is a fast drying, durable coating formulated for application to bilge areas. This paint helps prevent absorption of oil, gasoline or sludge into wood and fiberglass. Features a semi gloss finish and is available in white or gray.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eHard wearing coating for bilges and bulkheads.\u003c\/p\u003e\u003cp\u003eChemical resistance to fumes, fuel and oil.\u003c\/p\u003e\u003cp\u003eHigh opacity for thorough coverage.\u003c\/p\u003e\u003cp\u003eCleans easily for reduced upkeep.\u003c\/p\u003e\u003cp\u003eSold in quarts\u003c\/p\u003e\u003cp\u003eHow to Apply Interlux Bilgekote Marine Paint\u003c\/p\u003e\u003cp\u003eApplication Method: Brush, roller, or spray\u003c\/p\u003e\u003cp\u003eNumber of Coats: Two coats minimum\u003c\/p\u003e\u003cp\u003eCoverage: 450 sq. ft.\/gal.\u003c\/p\u003e\u003cp\u003eThinner: Brushing Liquid 333 or Special Thinner 216\u003c\/p\u003e\u003cp\u003eDry Times\u003c\/p\u003e\u003cp\u003e59°F\u003c\/p\u003e\u003cp\u003e73°F\u003c\/p\u003e\u003cp\u003e95°F\u003c\/p\u003e\u003cp\u003eTouch Dry\u003c\/p\u003e\u003cp\u003e3 hours\u003c\/p\u003e\u003cp\u003e2 hours\u003c\/p\u003e\u003cp\u003e1 hour\u003c\/p\u003e\u003cp\u003eOvercoated By (min)\u003c\/p\u003e\u003cp\u003e16 hours\u003c\/p\u003e\u003cp\u003e12 hours\u003c\/p\u003e\u003cp\u003e8 hours\u003c\/p\u003e\u003cp\u003eSurface Preparation\u003c\/p\u003e\u003cp\u003eBare Fiberglass In Good Condition:\u003c\/p\u003e\u003cp\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/p\u003e\u003cp\u003eRinse with fresh water and allow to dry.\u003c\/p\u003e\u003cp\u003eDegrease with YMA601V Fiberglass Surface Prep.\u003c\/p\u003e\u003cp\u003eSand with 180 grade paper. Remove sanding residue.\u003c\/p\u003e\u003cp\u003eBare Fiberglass In Poor Condition:\u003c\/p\u003e\u003cp\u003eClean as above.\u003c\/p\u003e\u003cp\u003eSand with 80 grade paper then remove sanding residue.\u003c\/p\u003e\u003cp\u003eApply 1-2 coats of Pre-Kote primer.\u003c\/p\u003e\u003cp\u003eSand each coat with 120 grit sandpaper then remove sanding residue.\u003c\/p\u003e\u003cp\u003eBare Wood\u003c\/p\u003e\u003cp\u003eSand surface then wipe clean.\u003c\/p\u003e\u003cp\u003eApply Pre-Kote, sand surface and wipe clean.\u003c\/p\u003e\u003cp\u003eBare Metal\u003c\/p\u003e\u003cp\u003eSandblast or grind, remove sanding residue.\u003c\/p\u003e\u003cp\u003eWithin 1 hour of abrasion, apply 1 coat of Interprotect 2000E thinned 15-20%.\u003c\/p\u003e\u003cp\u003eFollowing the overcoating guidelines for Interprotect 2000E. Apply 1-2 coats of Pre-Kote.\u003c\/p\u003e\u003cp\u003eClear Epoxy\u003c\/p\u003e\u003cp\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/p\u003e\u003cp\u003eRinse with fresh water and allow to dry.\u003c\/p\u003e\u003cp\u003eDegrease with YMA601V Fiberglass Surface Prep.\u003c\/p\u003e\u003cp\u003eSand with 80 grit paper then remove sanding residue.\u003c\/p\u003e\u003cp\u003eApply one coat of Epoxy Primekote or Interprotect 2000E.\u003c\/p\u003e\u003cp\u003ePreviously Painted Surfaces\u003c\/p\u003e\u003cp\u003eThe surface must be clean and dry.\u003c\/p\u003e\u003cp\u003eSand using 180-220 grit paper, then remove sanding residue.\u003c\/p\u003e\u003cp\u003eApplication\u003c\/p\u003e\u003cp\u003eApply 2-3 coats of Bilgekote following the proper dry times.\u003c\/p\u003e\u003cp\u003eSand between coats using 220-230 grit paper, then remove sanding residue.\u003c\/p\u003e\u003cp\u003eBilgekote may be applied by roller and brush using the roll and tip method.\u003c\/p\u003e\u003cp\u003eBilgekote may also be applied by spray.\u003c\/p\u003e\u003cp\u003eClick to Download Interlux Bilgekote Application Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is Interlux Bilgekote Bilge Enamel Marine Paint used for? Interlux Bilgekote Bilge Enamel Marine Paint is a fast-drying, durable coating formulated for bilge areas and bulkheads. It helps prevent oil, gasoline, and sludge from being absorbed into wood and fiberglass while providing a hard-wearing surface that can be cleaned easily.\u003c\/li\u003e\n\u003cli\u003eWhat surfaces can Interlux Bilgekote be applied to? Interlux Bilgekote can be applied to properly prepared fiberglass, wood, metal, clear epoxy, and previously painted surfaces. Surface preparation varies by substrate and may include cleaning, sanding, or applying the appropriate primer before the Bilgekote coating.\u003c\/li\u003e\n\u003cli\u003eHow many coats of Interlux Bilgekote should I apply? Apply a minimum of two coats of Interlux Bilgekote, with the application instructions allowing two to three coats. Sand between coats using 220-230 grit sandpaper and remove sanding residue before applying the next coat.\u003c\/li\u003e\n\u003cli\u003eHow can Interlux Bilgekote be applied? Interlux Bilgekote can be applied by brush, roller, or spray. When using a brush or roller, the product may be applied with the roll-and-tip method. The appropriate thinner for application is Brushing Liquid 333 or Special Thinner 216.\u003c\/li\u003e\n\u003cli\u003eHow long does Interlux Bilgekote take to dry? Drying time depends on temperature. At 73°F, Interlux Bilgekote is touch dry in approximately 2 hours and can be overcoated after a minimum of 12 hours. At 59°F, the minimum overcoat t…\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Interlux Paint","offers":[{"title":"Gray","offer_id":50581713879298,"sku":"ILX-YMA100","price":49.19,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":50581713912066,"sku":"ILX-YMA102","price":49.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/429370_source_1751999549_40281d97-00f4-4269-aa40-12b9a60a6cb2.jpg?v=1791078399","url":"https:\/\/allmarineworld.com\/products\/interlux-bilgekote-marine-paint-quart","provider":"All Marine World","version":"1.0","type":"link"}