{"product_id":"bennett-6-x-12-bolt-electric-trim-tab-kit-edge-mount","title":"Bennett Marine Bolt 6 X 12 Edge Mount","description":"\u003cp\u003eBennett BOLT612ED 6\" x 12\" BOLT Electric Trim Tab Kit - Edge Mount\u003c\/p\u003e\u003cp\u003eBennett Trim Tab sizes are in format span x chord. Span is the side to side measurement, chord is the fore to aft measurement.\u003c\/p\u003e\u003cp\u003eThe Bennett BOLT Edge Mount Trim Tab Set is designed with an adjustable upper hinge for transoms with limited vertical space. Tabs turn up for added strength and feature piano-hinged backing plates.\u003c\/p\u003e\u003cp\u003eCompared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new \"superior by design\" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.\u003c\/p\u003e\u003cp\u003eElectric trim tab systems are suitable for:\u003c\/p\u003e\u003cp\u003eTrailered boats 17-28 ft.\u003c\/p\u003e\u003cp\u003eSingle actuator use, due to the inability to synchronize two electric actuators on the same tab.\u003c\/p\u003e\u003cp\u003eTrim Tab Dimensions:\u003c\/p\u003e\u003cp\u003eWidth: 6\"\u003c\/p\u003e\u003cp\u003eDepth: 12\"\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eRequires less than 6.5\" of vertical transom space to install.\u003c\/p\u003e\u003cp\u003eWires are concealed and protected through the upper hinge = there are no exposed wires to the marine environment.\u003c\/p\u003e\u003cp\u003eRobust, water-tight black nylon actuator provides trouble-free operation.\u003c\/p\u003e\u003cp\u003eMain seal located high to protect against marine growth and water intrusion failures.\u003c\/p\u003e\u003cp\u003eQuieter than any other system on the market - No more scaring the fish away!\u003c\/p\u003e\u003cp\u003eInstallation is fast - no need to disassemble parts of the actuator.\u003c\/p\u003e\u003cp\u003e5 Year Manufacturer's Warranty\u003c\/p\u003e\u003cp\u003eBennett Part#: BOLT612ED\u003c\/p\u003e\u003cp\u003eYamaha Part#: 6BT-50013-53-00\u003c\/p\u003e\u003cp\u003eWhat's Included:\u003c\/p\u003e\u003cp\u003e(2) BEA2000 12-volt trim tab actuators\u003c\/p\u003e\u003cp\u003e(2) Stainless steel trim planes and mounting plates.\u003c\/p\u003e\u003cp\u003e(2) 20 ft harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e6ft. wire harnesses and waterproof connectors.\u003c\/p\u003e\u003cp\u003eSWITCH SOLD SEPARATELY\u003c\/p\u003e\u003cp\u003eClick here for Bennett BOLT1212ED 12\" x 12\" BOLT Electric Trim Tab Kit Installation Instructions\u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat is the Bennett BOLT612ED 6\" x 12\" BOLT Electric Trim Tab Kit designed for? The Bennett BOLT612ED BOLT Electric Trim Tab Kit is designed for trailered boats 17 to 28 feet long and transoms with limited vertical space. The edge-mount design requires less than 6.5 inches of vertical transom space and uses adjustable upper hinges for installation.\u003c\/li\u003e\n\u003cli\u003eWhat are the trim tab dimensions of the Bennett BOLT612ED? The Bennett BOLT612ED includes 6-inch wide by 12-inch deep trim tabs. Bennett specifies trim tab dimensions using span by chord, with span referring to the side-to-side measurement and chord referring to the fore-to-aft measurement.\u003c\/li\u003e\n\u003cli\u003eWhat is included with the Bennett BOLT612ED Electric Trim Tab Kit? The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20-foot harnesses with waterproof connectors, and 6-foot wire harnesses with waterproof connectors. The switch is sold separately.\u003c\/li\u003e\n\u003cli\u003eHow are the wires protected on the Bennett BOLT612ED trim tab system? The Bennett BOLT612ED routes its wires through the upper hinge, keeping them concealed and protected from the marine environment. The actuator also features a main seal positioned high to help protect against marine growth and water intrusion failures.\u003c\/li\u003e\n\u003cli\u003eCan the Bennett BOLT612ED use two electric actuators on the same trim tab? No. Bennett specifies single actuator use for electric trim tab systems because two electric actuators cannot be synchronized on the same tab. The BOLT612ED kit includes two actuators for its trim tab set.\u003c\/li\u003e\n\u003cli\u003eDoes the Bennett BOLT612ED include the control switch? No. The control switch is sold separately. The kit includes the electric trim tab actuators, stainless steel trim planes and mounting plates, wiring harnesses, and waterproof connectors needed as specified in the product description.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":50581540798722,"sku":"BEN-BOLT612ED","price":750.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/Bennett-BOLT612ED-6-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit-Edge-Mount__53036.1739462535_d45b4068-d3d3-4751-9814-3c1e92a00651.webp?v=1791077052","url":"https:\/\/allmarineworld.com\/products\/bennett-6-x-12-bolt-electric-trim-tab-kit-edge-mount","provider":"All Marine World","version":"1.0","type":"link"}