{"product_id":"attwood-folding-anti-glare-boat-navigation-light","title":"Attwood Folding All-Round Anti-Glare Light","description":"\u003cp\u003eAttwood Folding All-Round Anti-Glare Boat Navigation Light\u003c\/p\u003e\u003cp\u003eThis Attwood Folding Anti-Glare Boat Navigation Light is built to last in the harsh marine environments with its non-corrosive materials and glass-filled polymer bases. It features a fold-down base that allows the light to swing 180° and can be mounted on both horizontal and vertical mounts. All of the wiring is concealed and protected within the pivoting base. In extreme conditions, if a 12ft.\/lb. force hits the base, the cam lock releases and allows base to swing down, reducing the chance of breakage to the base or pole. With a two mile, 360° light visibility, this anti-glare boat navigation light is for use on boats up to 39.4 ft.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003eFold-Down Base That Allows The Light To Swing 180°\u003c\/p\u003e\u003cp\u003eAll Wiring Is Concealed and Protected Within The Pivoting Base\u003c\/p\u003e\u003cp\u003eHas Two Mile, 360° Visibility\u003c\/p\u003e\u003cp\u003eFor Use On Boats Up To 39.4 ft.\u003c\/p\u003e\u003cp\u003eComes With A 12\" Black Plastic Pole\u003c\/p\u003e\u003cp\u003eBuilt To Last In Harsh Marine Environments\u003c\/p\u003e\u003cp\u003eCan Be Mounted On Both Horizontal and Vertical Mounts\u003c\/p\u003e\u003cp\u003eNon-Corrosive Materials\u003c\/p\u003e\u003cp\u003eGlass-Filled Polymer Base\u003c\/p\u003e\u003cp\u003eIncludes a 9-Watt Wedge Base Lamp\u003c\/p\u003e\u003cp\u003eIncludes Mounts\u003c\/p\u003e\u003cp\u003eSpecifications:\u003c\/p\u003e\u003cp\u003eVisibility: Two Mile, 360° Visibility\u003c\/p\u003e\u003cp\u003eInstallation Instructions\u003c\/p\u003e\u003cp\u003eHOW TO INSTALL ATTWOOD FOLDING ALL-ROUND ANTI-GLARE LIGHT\u003c\/p\u003e\u003cp\u003eInstallation\u003c\/p\u003e\u003cp\u003eChoose a position near the transom that is accessible to wiring and has clearance below deck.\u003c\/p\u003e\u003cp\u003ePlace base on the gunwale or deck. At desired location, be sure there I room to rotate the cover. Mark position for the 1-3\/8” socket hole.\u003c\/p\u003e\u003cp\u003eRemove base and drill the 1-3\/8” diameter socket hole, being careful not to crack the gel coat finish around the hole.\u003c\/p\u003e\u003cp\u003eFit base into socket hole so it is parallel to boat centerline. Mark position and drill the three screw holes.\u003c\/p\u003e\u003cp\u003eRemove base and connect wires through socket hole. Connect one wire to the battery ground (-). Attach other wire to the 1-amp fused, positive (+) switched wire from the navigation light switch.\u003c\/p\u003e\u003cp\u003eApply sealant between deck and light base. Fasten base with three #10 stainless steel screws. Do not overtighten screws.\u003c\/p\u003e\u003cp\u003eReplacing Light Poles without a Locking Collar\u003c\/p\u003e\u003cp\u003eAlign pole screw with slot in the existing base. Insert pole into base.\u003c\/p\u003e\u003cp\u003ePress down firmly to engage electrical connectors.\u003c\/p\u003e\u003cp\u003eTo remove pole, pull straight up.\u003c\/p\u003e\u003cp\u003eReplacing Light Poles with Locking Collar\u003c\/p\u003e\u003cp\u003eAlign pole screw with slot in the base. Insert pole into base.\u003c\/p\u003e\u003cp\u003ePress down firmly to engage electrical connectors.\u003c\/p\u003e\u003cp\u003eSlide locking collar down to base, rotate until you can insert lower ring inside top of base.\u003c\/p\u003e\u003cp\u003ePress collar down into base and rotate until it tightens between pole and base.\u003c\/p\u003e\u003cp\u003eTo remove light, rotate locking collar in opposite direction until it loosens, then pull up on pole.\u003c\/p\u003e\u003cp\u003eRemoving Locking Collar\u003c\/p\u003e\u003cp\u003eFor bases that do not accept locking collar, remove screw at bottom of pole. Slide locking collar off end of pole.\u003c\/p\u003e\u003cp\u003eReplace screw in the upper screw hole.\u003c\/p\u003e\u003cp\u003eReplacing Bulb\u003c\/p\u003e\u003cp\u003eUnscrew frosted globe counter-clockwise and remove.\u003c\/p\u003e\u003cp\u003ePull bulb straight up. Replace with #906 9-Watt Wedge Base Replacement Bulb.\u003c\/p\u003e\u003cp\u003eScrew lens clockwise onto pole.\u003c\/p\u003e\u003cp\u003eClean the light with a mild soap and warm water solution. Never use solvents or abrasives that may damage the lens or housing of the light.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":50581507113218,"sku":"ATT-5358-P12-7","price":55.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/att-5358-p12-7_1__79866.1567601596.jpg?v=1791076834","url":"https:\/\/allmarineworld.com\/products\/attwood-folding-anti-glare-boat-navigation-light","provider":"All Marine World","version":"1.0","type":"link"}