{"product_id":"attwood-battery-tray-with-adjustable-hold-downs","title":"Attwood Battery Tray With Adjustable Hold Downs","description":"\u003cp\u003eAttwood Marine Battery Tray with Adjustable Hold Downs\u003c\/p\u003e\u003cp\u003eLightweight, heavy duty corrosion-resistant polypropylene, non-corrosive black plastic. Includes adjustable-height crossbar and two retaining bolts. Attwood Marine's hold-down trays are designed to secure your battery. Meets ABYC Standard E-10 and U.S. Coast Guard requirements. Patented design. Install with #10 screws.\u003c\/p\u003e\u003cp\u003eIt fits most 24 Series batteries. Constructed from non-corrosive hi-strength plastic, this battery tray holder measures approximately 11\" wide by 7\" deep by 2\" tall overall. Holds 24 and 24M series batteries.\u003c\/p\u003e\u003cp\u003eModel\u003c\/p\u003e\u003cp\u003eDimensions\u003c\/p\u003e\u003cp\u003eBattery Size\u003c\/p\u003e\u003cp\u003e24 Series Battery Tray\u003c\/p\u003e\u003cp\u003e10-5\/8\" x 6-3\/4\" x 8-3\/4\"\u003c\/p\u003e\u003cp\u003e24\/24M\u003c\/p\u003e\u003cp\u003e27 Series Battery Tray\u003c\/p\u003e\u003cp\u003e12-1\/8\" x 6-3\/4\" x 8-3\/4\"\u003c\/p\u003e\u003cp\u003e27\/27M\u003c\/p\u003e\u003cp\u003eHow to Install Attwood Battery Hold Down Trays\u003c\/p\u003e\u003cp\u003eAttwood Battery Hold Down Trays are designed to be used with standard batteries (24\/24M \u0026amp; 27\/27M series) including Gould 800 Delco Voyager.\u003c\/p\u003e\u003cp\u003eThe adjustable-height crossbar holds the battery in place. Mounting holes in the tray make it easy to secure and prevent battery movement. The tray is made of noncorrosive, heavy-duty black plastic. Meets ABYC Standard E-10 and U.S. Coast Guard requirements.\u003c\/p\u003e\u003cp\u003eTools and Materials Needed for Installation\u003c\/p\u003e\u003cp\u003eDrill and a suitable drill bit\u003c\/p\u003e\u003cp\u003eEight #10 stainless steel wood\/sheet metal pan head screws\u003c\/p\u003e\u003cp\u003eEight #10 stainless steel flat washers\u003c\/p\u003e\u003cp\u003eScrewdriver\u003c\/p\u003e\u003cp\u003eCAUTION : Battery must be located in a well ventilated area to prevent buildup of explosive gasses. To prevent acid burns, locate in an area away from casual contact.\u003c\/p\u003e\u003cp\u003eMounting Instructions\u003c\/p\u003e\u003cp\u003eDetermine a suitable location for the battery tray making sure there is enough room to work.\u003c\/p\u003e\u003cp\u003eUsing the battery tray as a template, mark the location of the screw holes. It is recommended that you use the mounting holes closest to the retaining bolt threads, if possible.\u003c\/p\u003e\u003cp\u003eYou may wish to further secure the tray with additional screws.\u003c\/p\u003e\u003cp\u003eDrill eight pilot holes for the screws. Do not drill through the bottom of the boat.\u003c\/p\u003e\u003cp\u003eFasten down the tray using the #10 screws and washers.\u003c\/p\u003e\u003cp\u003ePlace the battery into the tray.\u003c\/p\u003e\u003cp\u003eThread a bolt into the crossbar on each side. The bolts fit tightly to prevent them from becoming lost when changing batteries.\u003c\/p\u003e\u003cp\u003eInstall the battery retainer and bolts. Tighten moderately until bolts and\/or crossbar bend slightly.\u003c\/p\u003e\u003cp\u003eConnect the battery cables, following the battery manufacturer’s requirements for correct installation. The positive terminal should be insulated to prevent accidental shorting.\u003c\/p\u003e\u003cp\u003eCAUTION Overtightening the bolts could damage the threads or damage the crossbar.\u003c\/p\u003e\u003cp\u003eAttwood Marine Battery Tray with Adjustable Hold Downs FAQs\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhat battery sizes does the Attwood Marine Battery Tray fit? The Attwood Marine Battery Tray is available for 24\/24M and 27\/27M series batteries.\u003c\/li\u003e\n\u003cli\u003eWhat is included with the Attwood Marine Battery Tray? The Attwood Marine Battery Tray includes an adjustable-height crossbar and two retaining bolts.\u003c\/li\u003e\n\u003cli\u003eWhat material is the Attwood Marine Battery Tray made from? The Attwood Marine Battery Tray is made from lightweight, heavy-duty, corrosion-resistant polypropylene black plastic.\u003c\/li\u003e\n\u003cli\u003eWhat standards does this Attwood battery tray meet? This Attwood battery tray meets ABYC Standard E-10 and U.S. Coast Guard requirements.\u003c\/li\u003e\n\u003cli\u003eWhat screws are needed to install the Attwood Battery Tray? Install the Attwood Battery Tray with #10 screws. The installation instructions recommend eight #10 stainless steel wood or sheet metal pan head screws with eight #10 stainless steel flat washers.\u003c\/li\u003e\n\u003cli\u003eHow does the battery stay secured in the tray? The adjustable-height crossbar and retaining bolts hold the battery in place and help prevent battery movement.\u003c\/li\u003e\n\u003cli\u003eWhere should a marine battery tray be installed? Install the battery tray in a well-ventilated area with enough room to work, away from casual contact, and do not drill through the bottom of the boat.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood","offers":[{"title":"Group 24 Series Battery","offer_id":50581513928962,"sku":"ATT-9090-5","price":10.79,"currency_code":"USD","in_stock":false},{"title":"Group 27 Series Battery","offer_id":50581513961730,"sku":"ATT-9091-5","price":11.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/3024\/2562\/files\/att-9090-5_lg__28832.1558143452.webp?v=1791076876","url":"https:\/\/allmarineworld.com\/products\/attwood-battery-tray-with-adjustable-hold-downs","provider":"All Marine World","version":"1.0","type":"link"}